Noxinite Posted February 5, 2019 Author Posted February 5, 2019 (edited) Bump. Added Team Group Xtreem 4x4GB quad kit 2600C10 Samsung d-die (binning results from ages ago, they have been sitting in my daily since then). And added 7700K which is very average, it does >5.1GHz R15 @<1.40V on water, >5.4GHz on weak phase and around 6.4GHz R15 at full pot: https://hwbot.org/submission/4047449 Edited February 5, 2019 by Noxinite
Rhadamanthis Posted February 10, 2019 Posted February 10, 2019 (edited) 7700k ask f for my friend Edited February 10, 2019 by Rhadamanthis
Noxinite Posted February 16, 2019 Author Posted February 16, 2019 (edited) Bump, updated OP with g-die 32M binning numbers and 7700K 5GHz R15, screenshots below. G-die binning settings: 7700K 5/4.5GHz R15 @1.270V (checked with multi-meter). Delidded with MX-4 on the die and IHS. Edited February 16, 2019 by Noxinite
Noxinite Posted February 18, 2019 Author Posted February 18, 2019 Bump. 2GB G-die sticks all sold, and the 7700K is pending.
Noxinite Posted February 26, 2019 Author Posted February 26, 2019 Bump. 7700K, 2GB g-die, Tpower and Commando all sold and shipped.
Noxinite Posted April 7, 2019 Author Posted April 7, 2019 Updated and cleaned up the OP a bit. 1GB G-die removed and two higher binned E2140 added. E2140 L722A970 - with lapping, delid and liquid metal it does 3850MHz R15 @1.45V on water. FSB scales with cold, but core doesn't seem to. I should have a screenshot of that, as I only tested delidding it a month or so ago.
Noxinite Posted April 23, 2019 Author Posted April 23, 2019 (edited) Bump. Edited April 23, 2019 by Noxinite
Noxinite Posted June 6, 2019 Author Posted June 6, 2019 Bump. Are people wanting more proof of fsb/core for the binned chips?
Noxinite Posted June 30, 2019 Author Posted June 30, 2019 On 6/24/2019 at 2:35 AM, unityofsaints said: PM'd for the Semprons and quad kit Sold & posted. Updated the OP, only the follownig left now: 4x E2140, 5x E2160, 2x Pentium 4 2.8GHz, 3x Athlon 64 3000+, 2x Kingpin K-type probes, and 12x 10/13mm compression fittings.
Max-Hardware_Numb3rs Posted July 19, 2019 Posted July 19, 2019 K-Probe here PM me if still available please!
Recommended Posts