LN2 in the house, running i7 980x :)

Made another LN2 bench :)

  https://valid.x86.fr/qep61i

:)

Rocking https://valid.x86.fr/a1zikf

Have fun

Have fun with one of the best Socket ?

What is this? An oldschool OC thread with someone living through their first LN2 experience.
Awesome!

By the way, 1366 chips don't like even multis (odd ones work better) and single channel might give you a lower coldbug compared to triple.

Not my first Ln2 run....LOL

Yea, had a lot of fun with the i7 980x and R3E ?

Thanks

I really enjoyed benching this....:)

i7 4770k, GTX 670s

This is the next Ln2 adventure  Yeah  

i5 7600k delid .....pop :)

Getting ready, running naked LOL

 

WoW... could not get passed 5.5ghz      code 55 or 00    turbo V freeze screen   spelt Ln2 all over    worst ln2 session ever.  Maybe bad mount?

 

Edited November 30, 20187 yr by techjesse
add pics

@techjesse From what I heard the 4 corners of the socket are very slightly raised above the socket, which can run direct die mounting. You have to cut/shave them down.

Have you checked contact?

Thank for the tip ?

I found this... not a good mount, the TIM should be pushed out more

I have to let everything dry before I give it another shot....

Trim Here? Cut/shave down the corners? They look taller then the die. I missed that....I'll be ready next time.

 

The corners are taller the the die. Wow, I'll trim them....again Thanks

 

 

@techjesse Exactly that. I saw someone mention it in a review of the direct die guard.

just use bartx hs and you will be fine

Every thing dried, retest on water with naked die....

Wow look at temps running 5.3ghz   61c max ?

 

Running 5.4GHz on water.......wow direct die Rocks

I hope to run Ln2 soon.... again

M.2 flies 

 

 

Socket mod finally works. Glad to hear. Looking forward to your 8086k.

39 minutes ago, AutisticChris said:

Socket mod finally works. Glad to hear. Looking forward to your 8086k.

Thanks Chris, I'm getting everything done, had to wait a few days for the mobo to dry out (help it with heatgun) and had some help to mod the socket as I shake so much. Upon reboot everything fired right up made my day. I'm ready for Ln2 but waiting for the official background for Country Cup

I've tested every BIOS for this board and it is real picky on the ram.... but I run it up...lol

What model ram are you using?

G.Skill RipjawsV DDR4-3200 CL 16-16-16-36  1.35v   F4-3200C16D-8GVK   https://www.newegg.com/Product/Product.aspx?Item=N82E16820231900