kissili Posted August 30, 2022 Share Posted August 30, 2022 (edited) On 5/11/2022 at 6:38 PM, MrPils said: CO is fine, as far as Im aware though the bios I modded and posted earlier in this thread is the only one available. In terms of limitations, comparing to the Apex the Unify ITX isnt as good with per core overclocking, im around 100mhz lower than I was on the Apex. I suspect this is the Apex being good rather than the Unify ITX being "bad". Memory OC is ridiculously easy. My rev 1.1 board struggles with 1T but 2T is ridiculously easy. I can't get 7k stable, but with locked vccsa that's not a surprise. 6950mhz at stock cpu is stable, 6900mhz at full cpu oc. My current stable 6900 daily (ignore tertiaries, screenshot was during tuning) and my 6950mhz 3dmark settings are attached - apologies for the resolution you'll have to open them in a new tab and zoom. 124 isn't working on i unify with 12700, option still greyed Is there a chance of getting actual bios supporting it now? I used Direct link to the patched 124 bios for bclk unlock on C0 stepping cpus only: https://drive.google.com/file/d/17COf-uosnqr57Fzd9g6Zc7R3ve9_4X9G/view?usp=sharing Edited August 30, 2022 by kissili Quote Link to comment Share on other sites More sharing options...
kissili Posted August 30, 2022 Share Posted August 30, 2022 Here it is, actual working unify itx bios with non-k-oc. Thanks to Nizzen ? i unify 181u3 bios non-k-oc 1 Quote Link to comment Share on other sites More sharing options...
Noob Saibxt Posted August 31, 2022 Share Posted August 31, 2022 Hey I’m new to this forum, and I was hoping someone could help me.? I have a Z690i Unify and downloaded the 124(H) stepping bios but can’t figure out how to enable it in the bios menu. My microcode selections are AUTO/NORMAL/AVX-TRIAL. Can someone please help me figure this out? Quote Link to comment Share on other sites More sharing options...
Noob Saibxt Posted August 31, 2022 Share Posted August 31, 2022 On 8/30/2022 at 10:18 AM, kissili said: Here it is, actual working unify itx bios with non-k-oc. Thanks to Nizzen ? i unify 181u3 bios non-k-oc Thank you so much for that new bios!! I got my Unify itx working correctly now, your a badass lol 1 Quote Link to comment Share on other sites More sharing options...
Talon2013 Posted September 4, 2022 Share Posted September 4, 2022 So are they just not releasing these D4 B660 boards in the US then? Haven’t seen a single one in US market. Quote Link to comment Share on other sites More sharing options...
ironage Posted October 2, 2022 Share Posted October 2, 2022 (edited) On 9/4/2022 at 7:58 AM, Talon2013 said: So are they just not releasing these D4 B660 boards in the US then? Haven’t seen a single one in US market. https://www.newegg.com/p/2S7-07JP-2J9Z8?item=9SIB33YJJC2932&source=region Pretty expensive for a B660, i would rather have a DDR5 Board instead. Edited October 2, 2022 by ironage Quote Link to comment Share on other sites More sharing options...
TASOS Posted October 2, 2022 Share Posted October 2, 2022 8 hours ago, ironage said: https://www.newegg.com/p/2S7-07JP-2J9Z8?item=9SIB33YJJC2932&source=region Pretty expensive for a B660, i would rather have a DDR5 Board instead. What ? 393.28$ ? Grand Theft Board V .... Electronic new century Store That is a 125$ board for Chinese domestic market stores !!! 1 Quote Link to comment Share on other sites More sharing options...
Pavlinius Posted October 8, 2022 Share Posted October 8, 2022 Can someone attach non-K CPU overclock enabled bios for Asrock B660m PG Riptide ? Quote Link to comment Share on other sites More sharing options...
Noob Saibxt Posted November 10, 2022 Share Posted November 10, 2022 Hey guys. I just got the MSI B660M Mortar Max Wifi from Newegg for $200, was super pumped and got everything setup.. Fired my PC up and the Nonk OC feature isn't working lmfao. My bios version is .100 and the YouTube videos I have seen everyone is using .105 Can someone post this please? I've been looking everywhere for it with no luck. I would love you forever lol. Thanks guys!! Quote Link to comment Share on other sites More sharing options...
mirco69 Posted November 10, 2022 Author Share Posted November 10, 2022 1 hour ago, Noob Saibxt said: ... My bios version is .100 ... Did you try the latest official bios "7D97v121"? https://download.msi.com/bos_exe/mb/7D97v121.zip Quote Link to comment Share on other sites More sharing options...
Matsglobetrotter Posted November 10, 2022 Share Posted November 10, 2022 Any news on the z790 platform for either alderlake or rocket lakes series CPUs? Quote Link to comment Share on other sites More sharing options...
mirco69 Posted November 23, 2022 Author Share Posted November 23, 2022 (edited) can someone (confident in bios flashing) with a b660m mortar max please test if this bios version allows bclk higher than 103: "This BIOS is not officially provided. MicroCode has not added the 13th generation Non-K model, and can only support the 13th generation K model CPU" https://mega.nz/file/ArAzgC6T#rLzDFizl0frQIA_LbSTtzdrL6fJTORbYAK5lRmemwTs source: https://www.tweaktown.com/news/89620/msi-b660m-mortar-max-mobo-intel-core-i5-13600k-pushed-to-huge-5-8ghz/index.html Edited November 23, 2022 by mirco69 Quote Link to comment Share on other sites More sharing options...
y_zass Posted November 29, 2022 Share Posted November 29, 2022 This is probably the best place for my question. I want to order ASRock PG Riptide B660 mobo from AliExpress, it comes from China with free shipping for $160. I have an i5 12500, my current B660 mobo BIOS shows microcode revision 23. Will this effect my ability to BCLK OC it? Quote Link to comment Share on other sites More sharing options...
y_zass Posted November 29, 2022 Share Posted November 29, 2022 On 7/17/2022 at 3:50 PM, Talon2013 said: I got my Asrock B660 Riptide a few days ago in the US. Purchased on AliExpress. Non-K BCLK overclock works great. I'm thinking about ordering this too. Do you know what BIOS versions support it and if microcode matters? I have an i5 12500, H0 6 core die. Quote Link to comment Share on other sites More sharing options...
TASOS Posted November 30, 2022 Share Posted November 30, 2022 20 hours ago, y_zass said: I'm thinking about ordering this too. Do you know what BIOS versions support it and if microcode matters? I have an i5 12500, H0 6 core die. Asrock website ? https://www.asrock.com/mb/Intel/B660M PG Riptide/index.asp#CPU Quote Link to comment Share on other sites More sharing options...
y_zass Posted November 30, 2022 Share Posted November 30, 2022 2 hours ago, TASOS said: Asrock website ? https://www.asrock.com/mb/Intel/B660M PG Riptide/index.asp#CPU Obviously I looked there first, BIOS versions/info doesn't state if certain versions do or don't support non-k BCLK OC. I had heard that some newer Intel microcode versions do not support it, you have to use earlier versions to non-k BCLK OC. I was hoping someone that actually owns the board could chime in. Quote Link to comment Share on other sites More sharing options...
Pavlinius Posted December 1, 2022 Share Posted December 1, 2022 15 hours ago, y_zass said: Obviously I looked there first, BIOS versions/info doesn't state if certain versions do or don't support non-k BCLK OC. I had heard that some newer Intel microcode versions do not support it, you have to use earlier versions to non-k BCLK OC. I was hoping someone that actually owns the board could chime in. I'm with bios 5.01 that states it supports 13th gen intel CPUs and non-K oc is working fine. Benching i3 12100f at 5.4Ghz. There's a really recent 6.02 bios that haven't tried yet. Quote Link to comment Share on other sites More sharing options...
y_zass Posted December 1, 2022 Share Posted December 1, 2022 9 hours ago, Pavlinius said: I'm with bios 5.01 that states it supports 13th gen intel CPUs and non-K oc is working fine. Benching i3 12100f at 5.4Ghz. There's a really recent 6.02 bios that haven't tried yet. Thank you! This is good to know. I am leaning more towards MSI Mortar Max now though, it's starting to set in that I won't have any warranty and I think it would be the safer choice. $50 more though... Quote Link to comment Share on other sites More sharing options...
TAGG Posted December 2, 2022 Share Posted December 2, 2022 BIOS 3.01 allso works with non-k OC and allso can do AVX-512 with CPU that supports it and some effort As for warranty i personally don't really care as that's voided as soon as you're starting to scratch up the soldermask to throw more caps that the problem 1 Quote Link to comment Share on other sites More sharing options...
bgeneto Posted December 23, 2022 Share Posted December 23, 2022 On 11/30/2022 at 5:05 PM, y_zass said: Obviously I looked there first, BIOS versions/info doesn't state if certain versions do or don't support non-k BCLK OC. I had heard that some newer Intel microcode versions do not support it, you have to use earlier versions to non-k BCLK OC. I was hoping someone that actually owns the board could chime in. Every official released BIOS version from ASRock I've tested has non-k bclk overclocking capability above 103MHz. But IMHO this mobo is buggy, several options in BIOS does not work properly (like AVX offset, saved profiles)... For me the major problem is: if you disconnect the psu cable (or had a power outage) you "lose" your BIOS settings, having to press F2 to enter the BIOS and save settings every time the the psu is powered off? Quote Link to comment Share on other sites More sharing options...
Pavlinius Posted December 24, 2022 Share Posted December 24, 2022 12 hours ago, bgeneto said: Every official released BIOS version from ASRock I've tested has non-k bclk overclocking capability above 103MHz. But IMHO this mobo is buggy, several options in BIOS does not work properly (like AVX offset, saved profiles)... For me the major problem is: if you disconnect the psu cable (or had a power outage) you "lose" your BIOS settings, having to press F2 to enter the BIOS and save settings every time the the psu is powered off? The settings are saved. This is the reason to have then prepopulated in the bios. From time to time my board also fails to boot properly and asks to enter the bios but I guess this is normal for this kind of hack (blck oc hack) and I just enter bios and hit save and everything is ok. So I wouldn’t says the board is buggy but maybe I’m wrong. To Asrock riptide owners do you have a working Sleep in Windows? I don’t have Sleep in power menu at all. Quote Link to comment Share on other sites More sharing options...
ps000000 Posted January 2, 2023 Share Posted January 2, 2023 The unrelease MSI B760m mortar max wifi also able overclock 12th gen cpu. Quote Link to comment Share on other sites More sharing options...
ruslan3d Posted January 19, 2023 Share Posted January 19, 2023 May be my post will be helpful. Yesterday got ordered MSI MAG B660 MORTAR MAX WIFI DDR4 from USA (B&H store). The i5 12400F bought locally in Azerbaijan. Motherboard was delivered with AMI BIOS 7D97v11, and updated to AMI BIOS 7D97v13. PC just assembled (with Deepcool AIO), no OS installed yet, only BIOS enters completed to date. Will continue today evening. The overclock option for non-K CPU is available in BIOS, the value for BLCK can be changed, tried to change to 120 MHz with success but not applied. Will check overclocking after OS installation and preliminary checks. And of course will provide information here later . . . 1 Quote Link to comment Share on other sites More sharing options...
ruslan3d Posted January 23, 2023 Share Posted January 23, 2023 (edited) Overclocking on MSI MAG B660 MORTAR MAX WIFI DDR4 confirmed . . . Stock configuration under this spoiler. Spoiler And overclocked below (44x, 42x, 40x and BLCK 120MHz). Spoiler Edited January 23, 2023 by ruslan3d 1 Quote Link to comment Share on other sites More sharing options...
Al1G Posted January 31, 2023 Share Posted January 31, 2023 On 12/1/2022 at 2:04 PM, Pavlinius said: I'm with bios 5.01 that states it supports 13th gen intel CPUs and non-K oc is working fine. Benching i3 12100f at 5.4Ghz. There's a really recent 6.02 bios that haven't tried yet. I have information that this ASRock PG Riptide B660 does not support overclocking on non-K processors of the 13th generation, due to the Intel ban. Is it possible to check the overclocking of the 13th generation on this board? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.