Jump to content
HWBOT Community Forums

Recommended Posts

Posted

hello

I have a 2200 ADATA xpg +

and a asus ME4 Z

I do not get them stable or 2000 9-9-9-24 1.65v or 1.75V

what is the problem?

do not understand why I can not make stable

not even start windows

 

you can help me please

 

 

 

p1020218m.jpg

Posted

I have also problem stabilizing hypers on asus z68 (gene-z). I've found cr 2 helping, and raising vdimm about 0.05v more than else needed.

Voltage for complete super pi 32m @1070 8-8-8-24 2T was 1.18 vccio/vccsa, 1.70 vdimm. For sandy bridge it's easier to just use good bbse or psc, too bad because hypers is (was) the shit.

Posted
I have also problem stabilizing hypers on asus z68 (gene-z). I've found cr 2 helping, and raising vdimm about 0.05v more than else needed.

Voltage for complete super pi 32m @1070 8-8-8-24 2T was 1.18 vccio/vccsa, 1.70 vdimm. For sandy bridge it's easier to just use good bbse or psc, too bad because hypers is (was) the shit.

 

QFT

 

you cannot make them stable cause brands don't bother offering proper support for the best DDR3 chip...

sad story but is really better to find a good PSC or BBSE kit to pair with SB crap.

  • Administrators
Posted

@Massman So for me everyday is sunday, as PSC on SB are simply slow compared to BBSE and some Hyper :P

@Lancia Delta Try something like that, with a good cpu they work better,is also bclk limit, if yours don´t work, you might be victim of Intels lack to guarantee compabilty

kit222168-8-7-21-membn4j8r.jpg

Hope it helps, membooster enabled, everything else auto

Posted

usually, if you can't make certain SB+Hyper combination work within 5 minutes of troubleshooting (relaxing everything you can), you won't get it to work at all

I prefer good PSC over good Hyper any day of the week (except for sunday)
will trade your GTX2 for my good PSC :)
Posted

I have a GSkill 17600hcl9-2gbxmd

they do 7-9-7-23 1T at 2200 to 1.65 v not think it's the cpu

This makes 105bclk 2600K and 5650> Z68 but p67> 5715

ADATA these came from a rma

I have avierto are new and do not know if the memories are those that are bad

or is incompatible would need to try them on another platform

  • Administrators
Posted

First test you can make is 1:6 1600 6-6-6-18 60 1T if you have only sb atm, these should do this at below 1,6V-but to be sure the mems are technically OK testing on other platform would be best

Posted
How good PSC.

 

Are we talking DDR3-2200C6-9-6 ?

I don't think you'll ever find PSC that does 1100MHz at tRCD 9, 1070+ 6-9-6 is BBSE territory (which I could also trade for your GTX2 :D)
  • Administrators
Posted

these mems are ok- definitely in my opinion. That most Hypers have compability issues on SB is known, they don´t run at 1:8 divider stable. You can keep these and use them for 1:6 and 1:7, there at c7, and other system likes 775 or 1366/2011 where they will do excellent job, or you sell them- as SamOCX said, if hypers have this issue on a board, thweaking normally does not help you. They won´t run 1:8 with your current SB-system, at least not 32M. maybe 1M and 3Ds where they can do good job, these are as said technically ok I think, this is proven by your test. I am sure on 1156 or 1366 and even 2011 these will do specs and more

  • Administrators
Posted

I can´t predict if these run well on ivy, without test this is lottery with Intel. So it will be your decision if you take the risk or sell, sorry that I can´t help you on this

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...