Crew stummerwinter Posted February 4, 2010 Crew Posted February 4, 2010 PEG_RBIAS present on 1366 platform too, but related to IOH. If anybody want try I can show Tylersburg chipsets have PE0RBIAS (ball AN34), PE1RBIAS (ball AN13). these are hooked to GND with same 750ohm resistor. But coz 1366 IOH is extra chip, not part of CPU package it may not be related to CB/CBB's. Thought about it, but could not find... Can you please tell me the landmark or sent me magnifying glass... Lets see, I might try... Quote
Topalof Posted February 20, 2010 Posted February 20, 2010 hi, i seek a vcore mod P55-UD6,but i don't find anyone know? thanks bye Quote
Massman Posted February 20, 2010 Author Posted February 20, 2010 I think it's on the back near the socket Quote
Guest maxturbogoo Posted March 14, 2010 Posted March 14, 2010 Wow thats really interesting. Thnx for sharing. Quote
Topalof Posted March 23, 2010 Posted March 23, 2010 hi, the CBB/CB mod for H55M-S2H is the same as H55-UD3H ? thanks bye Quote
trans am Posted May 15, 2010 Posted May 15, 2010 Im gonna do this mod on the h55m-USB3 I think its the same spot as the the last 2 pics. Ill post results. EDIT so far so good. the mod went fine and I can boot in at any temp I went as far as -145c and no problems. FOR THE RECORD THE LAST 2 PICS WORK CB MOD ON H55M-USB3!!! THanks again! now if anyone can help me remember my settings. Thats another story. Quote
Sanko Posted October 2, 2010 Posted October 2, 2010 sorry to disturb here. maybe it's a bit too late but is there anyone happen to know the VCORE Mod for MSI Trinergy? Quote
Evocarlos Posted October 2, 2010 Posted October 2, 2010 sorry to disturb here. maybe it's a bit too late but is there anyone happen to know the VCORE Mod for MSI Trinergy? is the pwm controler chip a up6218 ? Quote
Sanko Posted October 2, 2010 Posted October 2, 2010 (edited) Yes it is, the same as gd85. Should i follow your guide in benchtec? Edited October 2, 2010 by Sanko Quote
Evocarlos Posted October 2, 2010 Posted October 2, 2010 Yes it is, the same as gd85. Should i follow your guide in benchtec? hey the youtube vid is for cold bug mod (lol you edited^) if its the same controller as the gd 85 then heres a link to the gd-85 volt mod http://www.benchtec.co.uk/forums/showthread.php?t=5854 also consider if the max is 1.7v in the bois you have the voltage dipper for 0.2v i know with the gd -80 if you set 1.7v in the bios then click the dipped you get like 1.88v just test it out say set the voltage in the bois at 1.1v then probe the V-read point click the cpu dipper and probe again im sure its a 0.2v jump cant really check as the triergy i had the dr mos blew up when they got wet Quote
Sanko Posted October 2, 2010 Posted October 2, 2010 hey the youtube vid is for cold bug mod (lol you edited^) if its the same controller as the gd 85 then heres a link to the gd-85 volt mod http://www.benchtec.co.uk/forums/showthread.php?t=5854 also consider if the max is 1.7v in the bois you have the voltage dipper for 0.2v i know with the gd -80 if you set 1.7v in the bios then click the dipped you get like 1.88v just test it out say set the voltage in the bois at 1.1v then probe the V-read point click the cpu dipper and probe again im sure its a 0.2v jump cant really check as the triergy i had the dr mos blew up when they got wet yeah... iirc, in bios i set to 1.71v then after pushing the switch it's 1.8v. too bad now do not have the correct VR to apply the mod. only had 20K. thanks for your guide though. Quote
Kona64 Posted November 5, 2019 Posted November 5, 2019 Reviving an old thread lul, mod yet untested but this should be the resistor to short for CBB on a maximus 3 gene / maximus 3 formula, up next gotta figure out my P7P55D 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.