El Gappo Posted June 18, 2012 Posted June 18, 2012 I think scoot gets the rage http://www.overclock.net/t/1271479/asus-rma-z77-mvg Quote
K404 Posted June 18, 2012 Author Posted June 18, 2012 Where's Bex? She annihilated an MSI board. I mean ANNIHILATED. I think she was breathing it, it was so vapourised.... Quote
Dualist Posted June 18, 2012 Posted June 18, 2012 I think scoot gets the rage http://www.overclock.net/t/1271479/asus-rma-z77-mvg Awesome... I hope someone recorded the verbal rant that led up to that and the aftermath. Quote
Eeky NoX Posted June 18, 2012 Posted June 18, 2012 Insane to see a mobo in a such state! No rage to my side... but I hate water more and more!!! Liquide coolant 3 times all over the mobo during preparation...drying session 15mn each! Insulation, 1h CPU under cascade, mobo and GPU's under water...than CRASH!REEBBOOTT!REEBOOTT!REEBOOT!STOP!!! Power OFF! Unmounted all the system (no leaks and very little condensiation) and again drying session during 20mn... But glad to see everything is safe once I put the waterblock back on the cpu... Well, another week-end attempting to fail .......and I won \o/ I hate that F(l)uckin drop!!! Quote
M.Beier Posted June 19, 2012 Posted June 19, 2012 Well, worst is when you throw the pot, it usually never ends well.... Must admit it happens occationally that I test how aerodynamic those Intel retail boxes, with contend are..... I guess planning to visit me while I bench, can earn someone a CPU? I usually tend to throw the box out the window, then pick it up a bit after..... Well I bench at night Quote
BeepBeep2 Posted June 27, 2012 Posted June 27, 2012 I usually only bench those AMD things where you just pour more and more LN2 into a black hole until you realize the CPU sucks and couldn't Bulldoze a grain of sand. I wish I had the benefit of benching one of those new-fangled intel creeping woody plant things. I have only benched the fine-ground silica type. I pulled my faildozer out of the socket twice now, stuck to the pot. Smashed a Phenom II X4 with a hammer after it died for no reason at stock settings on LN2. Quote
K404 Posted June 29, 2012 Author Posted June 29, 2012 (edited) I just perfected....and I mean PERFECTED this face this afternoon. Session was going great. Decided it was time for just a few more CPU MHz. GTL crashed, restarted computer, went into BIOS, changed 2 settings. Computer wouldn't POST again. You gotta. be. ****ing. kidding me Edited June 29, 2012 by K404 Quote
El Gappo Posted June 29, 2012 Posted June 29, 2012 Awesome, at the next meet you can join me and scoot drinking and pulling that face at hardware all day instead of that silly benching lark you always do. Quote
Apfelkuchen Posted June 29, 2012 Posted June 29, 2012 I perfected WTF-kittey-face when i benched my E6750. One day, 4.1GHz @ 1.45V ran just fine, some days after that it wasn't even stable at 1.6V+ Quote
M.Beier Posted June 29, 2012 Posted June 29, 2012 I just perfected....and I mean PERFECTED this face this afternoon. Session was going great. Decided it was time for just a few more CPU MHz. GTL crashed, restarted computer, went into BIOS, changed 2 settings. Computer wouldn't POST again. You gotta. be. ****ing. kidding me Sure it wasnt more like this one? Quote
Dreadlockyx Posted July 2, 2012 Posted July 2, 2012 Not OC-related but I hope it'll make you smile anyway: My sh-t ISP's services showed to you in the video below. http://youtu.be/sQUPhs-lPDQ Pingtest results I managed to do after many tries: My friend's: Speedtest is about 6.7Mo/s Rx and 0.666Mo/s Tx. Forgive my russian/american/swiss/french accent. Quote
Apfelkuchen Posted July 2, 2012 Posted July 2, 2012 Video is already blocked in Germany, Proxmate helps though Quote
Dreadlockyx Posted July 2, 2012 Posted July 2, 2012 Scumbag YouTube and copyright policy. You like it ? Quote
Apfelkuchen Posted July 3, 2012 Posted July 3, 2012 Interesting, but a bit shaky - hard to see whats going on on your screen. Quote
Dreadlockyx Posted July 3, 2012 Posted July 3, 2012 Yeah I know... Got Parkinson due to my frustrations. x) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.