The official HWBOT Team Cup 2012 - SC3: "Memory Clock" thread.

[Christian Ney]

ou can go up to 3.6v via jumper. But to go higher you need to vmod yeah, don't have it in mind atm.

[d3mox]

via jumper on tusl2-c can go up to 3.4v but it's about ~3.5v :>

[Christian Ney]

ha, on both my CUSL2-C and TUSL2-C I have the jumper: 3.3-3.4-3.6 and I actually read 3.6v with the DMM and into the BIOS hw_monitor

[d3mox]

Okay, u right

 

3.65v on TUSL2-C

 

But maybe it can be higher by vmod? It will help u think?

[TerraRaptor]

No need to mod - just short all those 4 pins together to get 3.95v. The problem would be "cold start" - it won't post if you make this before post. So you have to short all of them after post is complete. I normally use 2 jumpers to short 1-2 and 3-4 and start the system - and after system starts I short these 2 jumpers with a wire.

[d3mox]

Thanks mate

[Christian Ney]

Okay, I am back in France this week-end I will take some stuff for the Memory Clock Stages (HWBot Team Cup) with me to Switzerland.

 

Luggage list:

 

EDO Mem Rig + lots of EDO Memory - Check

336 SDRAM Mem - Check

61 x s370 CPU - Check

TSUL2-C / CUSL2-C vmodded - Check

ASUS P4T-F - Check

10x s423 CPU - Check

17x Rambus RDRAM + 4x CRIMM - Check

LP UT NF4 SLI-DR Expert + SLI-DR - Check

s939 CPUs - Check

5x Samsung TCCD - Check

1x Kingston special memory DDR1 - Check

9x Micron D9 GKX/GMH - Check

E8400 CPU - Check

Llano rig (Gigabyte MB vmod, 6x A8-3870K + 2x A8-3850) - Check

2x Crosshair V Fromula + 1x Crosshair V Fromula-Z - Check

3x FX-8150 - Check

All DDR3 Memory - Check (plus ones from TaPaKaH, package should arrive soon)

Monitor - Check

3x Seasnic PSU - Check

Power Cables - Check

Keyboard, mouse - Check

Insulation - Check

Vaseline - Check

2x LN2 Memory pot - Check

CPU LN2 Pot - Check

NB LN2 Pot - Check

PCI Bedug card - Check

Windows Xp CN Edition - Check

Windows 7 - Check

DVD reader - Check

5x Bench USB - Check

SATA/PCI Card - Check

AGp vga - Check

PCI Voodoo graphics card - Check

Some air coolers - Check

fans - Check

 

 

Just to let you know that you compete for the #2 spot

[Turrican]

nice... you show off.

[d3mox]

lol

[d3mox]

Fcuk, lost pc166 memory auction

[Christian Ney]

Which one ? didn't see it

[GENiEBEN]

Now that we know what car you drive. -Check

[Christian Ney]

will sue ebay for not notifying me there was a PC166 for sale

[Mr.Scott]

will sue ebay for not notifying me there was a PC166 for sale

Lol. Just scanned e-bay here for PC166 SDRAM. Found 1 stick. Bought for $2.99 shipped.

[Christian Ney]

-.- will sue ebay 2 times then, if I look for PC166 .co.uk, .de, .fr .com even if I tick the WorldWide stuff I find nothing and you guys found two...

 

See you supporting me in court

[d3mox]

It was in Polish auction

[Christian Ney]

Bought the GA-EP45-UD3R

[d3mox]

We can't find this board in Poland .

 

Biostar is good too, but we can't find it too.

[I.nfraR.ed]

Yeah, very hard to find these boards here as well.

[GENiEBEN]

I have one, might auction it soon.

[Christian Ney]

I.nfraR.ed you are safe buddy, I just can't manage to get my TCCD working well on the DFI LP UT NF4 Expert. And my two Ultra-D arrived dead from ebay, my Abit board I don't think she will be competitive .

 

WIll try some more time on the expert but already spent 8 hours rying several memory, bios, cpu. Not even 300 MHz -.-'

[hoyy]

WIll try some more time on the expert but already spent 8 hours rying several memory, bios, cpu. Not even 300 MHz -.-'

Same Problem here. My Ultra-D does nearly 290 Mhz an then it's over.

Same CPU and RAM on my A8N SLI do 350 MHz, and the Ultra-D was at 305 MHz 3 months ago. But now there's no way. -.-

 

Does anyone have an idea what could be that?

Edited August 24, 2012 by hoyy

[Christian Ney]

Ulta-D should be easy, you just need right BIOS and right bios settings, it's try and fail

[BeepBeep2]

Haz Socket 462 can magic DDR?

Naw? Sad.

[Christian Ney]

SDRAM WR - Check

DDR1 WR - Check

DDR3 WR - Check

EDO WR - Coming soon

RDRAM WR - Coming soon

DDR2 WR - I don't think so

FB DIMM - file not found

Edited August 24, 2012 by Christian Ney