Jump to content
HWBOT Community Forums

Recommended Posts

  • Replies 209
  • Created
  • Last Reply

Top Posters In This Topic

Posted

Yes, I'll upload the screenshots shortly.

 

Try the following:

 

1) clear cmos

2) boot at 180BCLK, 2:10 CL7-7-7-21, CPU x19, UNC x20

2) reboot, go in bios and increase to 195BCLK

3) reboot, go in bios and increase to 200BCLK

 

Then try if it runs 32M.

Posted

I tryed booting at 190 at those settings and it freezs on windows load screen :( tryed my other 980x too same thing. I will keep trying though and if I figure it out will post up the answer :D

Posted

this is what is set in subtimings when i try booting 175 I only set 7-7-7-19-64-1n only turned CPU features and power saving off.

 

GGq7d.jpg

 

even this fails pi :( think it is because I only have 1 cpu power cable ?

Posted

I'm also using one power cable.

 

I'm having some issues with DDR3-2000 when the CPU frequency is above 4GHz. I am able to run 3800/2000/4000 and 4300/1950/4300, though, which is something you already have problems with, I guess.

 

Three screenshots:

 

200.png

 

1911.png

 

195-3.png

(sorry, missed memory tab there)

Posted

Just ran 1.4b6 bios. For argument's sake I also did a few OS tweaks so no one could complain about the shitty end result.

 

- lsc=1

- disabled services

- theme= silver

- cw

 

No subtiming tweaking. Booting at 190MHz BCLK.

 

200-14b6-2.png

Posted

Try to boot at lower BCLK and up in Windows with your dashboard.

 

Sometimes I get instant freeze when booting at 200MHz BCLK, but get straight through when booting at 195MHz BCLK and upping in OS.

Posted
hey mass you are using hypers right gtx2?

 

Yeap, GTX2 Hypers.

 

I could try some PSC (3x1GB) if needed. Don't have that much memory lying around here.

 

PJ how did you get 18K write?

12K write is a big dream for me with xpower (tried 3boards and 5cpu's)

 

Ehr, how? Just ... set settings and run.

 

12K sounds like B2B was enabled.

Posted

 

Ehr, how? Just ... set settings and run.

 

12K sounds like B2B was enabled.

 

Man i worked on this project for some days but no way through 12K found!

Scores are like this :

20k-11k-19k

What's the problem about WRITE?

I've tried setting b2b to 0 from bios and cpu-tweaker and tried about every bios version you uploaded.

Posted

alrighty changed the tim, they use a pink hard like wax stuff on the NB and the thermal pads need to be thicker and only contact the first and last.

 

1850 7-8-7-24-88

boots but fails @ 14th line with same subtimings as your shot.

What type of vtt and vdimm you using?

Posted
Pieter can you try with your PSC? thanks...

 

Running now. Using the same memory as on MOA EU:

 

[hwbot=1022831]submission[/hwbot]

 

Man i worked on this project for some days but no way through 12K found!

Scores are like this :

20k-11k-19k

What's the problem about WRITE?

I've tried setting b2b to 0 from bios and cpu-tweaker and tried about every bios version you uploaded.

 

Tested several boards? Tested several CPUs?

 

alrighty changed the tim, they use a pink hard like wax stuff on the NB and the thermal pads need to be thicker and only contact the first and last.

 

1850 7-8-7-24-88

boots but fails @ 14th line with same subtimings as your shot.

What type of vtt and vdimm you using?

 

What kind of error do you have?

 

For 4000/2000/4000 I use 1.35V VTT and 1.7 Vdimm. For 4300/1975/4300 I need 1.45V VTT.

 

Did you clear the bios or load bios profiles?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...