George_o/c Posted January 16, 2014 Posted January 16, 2014 That board brings back so many memories! Quote
Jimba Posted January 17, 2014 Posted January 17, 2014 Very handy thanks roman!...shame I can't Vmod for the life of me. Quote
ogblaz Posted August 26, 2015 Posted August 26, 2015 I made this and i got a 0.05v gain is this all? Or should i check my solder. Also on the vdrop if a have it turned on 100k ohm i have a drop. To how much should i set it. Quote
K404 Posted August 26, 2015 Posted August 26, 2015 Do NOT tune the vDroop trimmer to 0 ohms, you will quite possibly kill the board. A little vDroop is healthy, do not try to get 0, that will take you closer to 0 ohms. If you got a gain, the solder is fine. Quote
ogblaz Posted August 26, 2015 Posted August 26, 2015 Ok thnx for your help, i thought there will be more of a gain in volts Quote
ogblaz Posted August 26, 2015 Posted August 26, 2015 The gain in volts was error, you gain 0,1V+ hurray Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.