General hardware discussion

You all know where is my P4C800-E Deluxe Now I am looking for a new one, seems the P4C800-E Deluxe is hard to find and the P4C800 Deluxe is more common. I searched but haven't found any good answer to: From an Overclocking point of view are both board the same ?

I have this one using Gigabyte 945gzm-s2 MoBo. Procesor is said to be running at 3ghz, but Cpu-Z and even when Bios is loading is showing me only 1200Mhz (200x6 - but it is supposed to be 200x15). I thought it was only Idle frequency, but Cpu-Z is showing me 1200Mhz even if CPU is in 100% load, and turning on/off those features for low temp and power consumption won´t change anything. Can someone send me an screenshot from some kind of CPU benchmark using this CPU at correct frequency so i can compare it? My email is "vavra222@seznam.cz" so you can send me your screenies there or post it htere, it doesn´t matter.

** I know I need Windows Server ;-) I was impressed Windows 7 installed without any hassles though, I'll try to install Windows 2008 R2 & then VM Ubuntu in the next fews days :-) Unfortunately I couldn't play with the Tesla box - maybe next time :-) If anybody wants any specific benchmarks run let me know and I'll do my best before someone realises this servers missing ;-) ** edit: I ran wprime 32M again but this time with 32 threads instead of just 4!

I have this card. http://www.newegg.com/Product/Product.aspx?Item=N82E16814127473 It's listed as an 8400GS 256mb. It is a G98 core a la gpuz. GPUZ also shows this card as a 8400, not 8400GS. What category do I put this card in? 8400GS (G98) or 8400 (G98)???

hello I have a problem with my 762 back to RMA is a new motherboard replacement I put my X980, the system starts normally As soon as I touch the BCLK Mobal it not boot she defaults to 133 if I go up to 135 on the code block it then goes on F8 FF in water the link for a video to look this have you see solution ? return to RMA ? SETUP EVGA Classified 4 way SLI Bios 77 CORSAIR GT and 3X1 WESTERN DIGITAL Velicoraptor 150GB Zotac GTX 465 1Go ANTEC 1200OC

Hey guys! I just put together a new computer: EVGA p55 classified 200 board Intel Core i7-870 2.93 Ghz 8gb Patriot dual channel ram Nvidia Geforce 465 superclocked What my problem is (not sure if it's even a problem) is that when I turn my computer on for the first boot up of the day, it comes on, LEDs/fans ect., then powers off for 1-2 seconds, then turns back on and is fully functional for the rest of the day until I have to shut down and restart it back up again. The mobo is making the 3 beeps that indicates everything is okay, and the post codes on the mobo all seem to be in order. Could this possibly be because I have 3 bios profiles and it's power off…

without killing it of course It's because for our Intel motherboards reviews we use the HD 5850, and the actual tester is at the Army but he will still review X58 boards. Other sockets will be reviewed by myself, but unfortunately we only have 1 HD 5850 and tons of HD 5870.

Hello. I have a problem. I have a vga asus 9800GX2 and mbo am2 m3n78-am and it ain't working. Both gpu and mbo were tested with other hardware and both are working fine, but together they are not. Fan on the vga is constantly working on 100% and it wont slow down, there is no picture on screen. Vga was tested on biostar p43 mbo and it was working fine, mbo was tested with 8800GTS and also worked fine. Does anybody know if there is any kind of conflict between those two components, the thing the vga and mbo are from asus and they won't work together. Tested with corsair tx650w and combat power 750W power suppies. At least if somebody knows some site where I could …

Found the board on cebit. It carried this nameplate:

HP ProBook 5320m 32.8 X 22.10 X 2.35 cm 13.3” matte monitor, the resolution is 1366X768. The open degree is 140. Integrated 2 MP webcam with fixed-focused lens. Left side SD\1 X USB 2.0\1 X Mic in&Line out\2 X USB 2.0\anti-thief lock Left side Power in\thermal holes\DisplayPort\RJ45 LAN\D-SUB Full-sized spill-resistant keyboard with HP DuraKeys

... but I'm using it like this right now http://valid.canardpc.com/show_oc.php?id=1684400

Intel Sandy Bridge 2600K @4000Mhz vs. Intel Core i7-980x @4000Mhz tested with windows xp - 32bit graphics: gtx 580 ...................2600k -- 980x --2600k@5000mhz 3dmark01 -- 87817 -- 58256 -- 103248 3dmark03 - 107079 - 102732 - 112333 3dmark05 -- 34527 -- 33866 -- 42283 3dmark06 -- 29963 -- 28278 -- 35461 pictures here http://www.overclockers.at/intel_processors/sandy_bridge_overclocked_221325?postid=3128277#post3128277 and here @5000mhz http://www.overclockers.at/intel_processors/sandy_bridge_overclocked_221325?postid=3128554#post3128554

Does anyone bench with retail hardware anymore! This is the processor to have atm and noone has bought one to post results with. Is everyone sandy bridge crazy or what?

Hercules 3d prophet 4500 I don't know the specs on it, but I did a few search queries and didn't come up with anything.

I just did an upgrade from q6600 to the new i5 2500k sandy bridge using mother board gigabyte p67a-ud3p 5870 gpu 1500 watt pc power and cooling psu 1tb wd hd 8gbs 2 sticks times 4 gbs corsair vegnece 1600mhz 9 9 9 24 1.5... the problem i am having is that when i boot up my pc the bios show my ram at 1333mhz instead of 1600mhz so i go into mit and change it manually puttting in the spec for my ram. reboot my pc and then it lags for a while in the bios display screen.. then it loads up windows 7. while running windows 7 i notice theres also a lag there as well. i replace my ram and mobo still had same problem replace my cpu and still the sam problem. i ran memtest for 12 …

Hello I have a board AsRock P67 Extreme 6. I wanted to ask whether this board is in the list of bad chips from Intel and has no problems and I can buy peace? Or is it better Asrock Fatality model? I hope you forgive my poor English language. Thank you very much for the information Greetings

I have a good one . It is available on ebay just like a0 980x's are Can I use for 3d if not for 2d? I just dont want to make anybody angry with me so thought I would ask.

Is this an after market cooler.....??

What about the submissions of 6950 flashed to 6970. Are these have to submit as a 6970?

Hi all, I am unfortunately not as old to know that. I am benching on Socket 370 atm(also other socket at the same time ). And using a VIA C3 733A, ASUS CUV4X. I cannot run any 3D stuff. I tried : GF 6200 AGP DDR2 GeForce 3 Radeon HD 3450 AGP GeForce 7900GS Radeon 9600 XT and Pro Radeon 9200 Launch PCMark 04 3D test : Blue Screen Open nVidia control panel(the one with the 3D settings) : Blue Screen after install drivers and reboot : Blue Screen saying atidll or nvidiadll drivers. I don't know if it's the chipset or the CPU or Motherbord + this CPU. Tomorrow will try with a Celeron and a Pentium III. Maybe someone know that, I tried to brows the…

Need help overclocking a Q9550 2.83 Yorkfield on a GIGABYTE GA-EP45C-UD3R using GSkill DDR3 1333 Dram. I had the same CPU overclocked to 3.6 for two years using DDR2800 and decided to install 2 4GB GSkill DDR3 1333 Ripjaws and don't know how to set the new DDR3 timings. If this doesn't work, I am going to try the same CPU and the new DDR3 1333 in an ASRock P43DE3. I have 16GB of the DDR3 1333 Ripjaws, and if I can't O/C the Q9550 with it, it will go back to new egg. I'll try this next if I can't o/c the Ripjaws on the GA-EP45C-UD3R: http://www.newegg.com/Product/Produc...82E16813157174 Here are the specs for the Ripjaws: http://www.newegg.com/Produ…

Need help overclocking a Q9550 2.83 Yorkfield on a GIGABYTE GA-EP45C-UD3R using GSkill DDR3 1333 Dram. I had the same CPU overclocked to 3.6 for two years using DDR2800 and decided to install 2 4GB GSkill DDR3 1333 Ripjaws and don't know how to set the new DDR3 timings. If this doesn't work, I am going to try the same CPU and the new DDR3 1333 in an ASRock P43DE3. I have 16GB of the DDR3 1333 Ripjaws, and if I can't O/C the Q9550 with it, it will go back to new egg. I'll try this next if I can't o/c the Ripjaws on the GA-EP45C-UD3R: http://www.newegg.com/Product/Product.aspx?Item=N82E16813157174 Here are the specs for the Ripjaws: http://www.newe…