skulstation

I don't have the card,Pic's ar from overclockers.com If sombody have this card can dey confurm if this is corect? Datasheet of the NCP81174 http://www.onsemi.com/pub_link/Collateral/NCP81174-D.PDF For the moment no luck to find info of the mem/ppl chip

Lol,u find it faster than i can responds Ps: stil need a mod for my 560 ti 448 classified whit chill 8266 datasheet of the chill 8266 http://www.irf.com/product-info/datasheets/data/pb-chl8266.pdf It has a 2-pin SMbus,so can i use a EVC divice on this card? pins to use ar #14 = SDA , #15 = SCL and GND

PJ you have mail

no problem i gone take new pics today. btw i gave this bord to my father in law for a upgrade from his slow e6600 setup

12-jan-2015 around 8:00 in the morning.

thx GIGABYTE for the qwick delivering just recived id

if you bench in 3D stock or air. its just the gpu's that need to be cooled whit stock or air. its free to use what cooling you wont for the cpu. the same gose for 2D. if you bench stock or air. its just for the cpu not for the gpu. but if you ar go for sub-zero cooling you go to extreme leage if you reali wont to search full air or full stock setup's you will need to use the Advanced submission search and type wich cpu and gpu you likt to know

ramdisk and 3dmark on the background. stil on the wifes laptop

I gone try it on my daily rig when i am in my new home (all the HW is sitting in boxes waiting to move) The wifes laptop need a new instalation of the OS and co This is whit a claen OS http://img.hwbot.org/u21574/image_id_1111951.jpeg same laptop loadingtime was 32929ms

Thx GIGABYTE for hosting the event and for the Lucky draw price, good luck to the rest

did just 1 run after reboot whit no 3dmark11 and than reboot and did 1 run whit 3dmark11 for 567p +11 points @ gpu+cpu +1 point @ cpu rest was the same exept the loading time for 720p -2 points @ gpu+cpu -6 points @ cpu -1 points @ fur rest was the same exept the loading time

thx for sharing. i have testet it on my wifes laptop, 2020m cpu whit a 7650m gpu 576p gave total +51points and 14484ms 720p gave total +16pints and 8118ms

thx for the hint, just saved me +-40€

vmod for the mem is working, whit a 20K i have 2.16V.thad is +0.06V above stock is ther an other place to conect a vr for the gpu? my conection came lose and can not conact agen on the same plase

thx for the help. tomorrow i gone search if i have a 10k. and so not ist conrad time

pin 3 is GND and from GND to pin 6 i have 583 ohm

thx for the info. i can not read the text on the chip. this is the only chip on the right site from the speaker.

a smal up date whit bater photo of the gpu chip " up6206ak vcz96a " and i think i have found the mem chip to mod " up6281s8 vgp979 " but i can not find a datasheet at the moment. if somwane have a id which pin is needed let it plz know, or how to prep this gpu for epower and co

in the EU shop ist in stock http://eu.evga.com/products/moreInfo.asp?pn=100-UC-0400-BR&family=Accessories nice to see more divices like this.i hope the g-power and asus power whil be soon availabil to the public.

congrats to all.and have fun whit the prize

Is the wallpaper for stage 3 the same as the other two? can only download the wallpaper on the Rules and Guidelines page. other links ar not working. ps: need to find some ms

so if i am corect. the right time that must be obtained, anywhere between 7 m 50 sec and 7 m 58s will be announced 2 January.

Stage 3: Super Pi 32M ▻The target score is to be revealed on HWBOT on Monday, December 29th ▻Submission will be open for 24 hours on Sunday, January 4th 2015 (following the UTC+08:00 time zone).

thx score is up

TIK TOK TIK TOK. 9 hours to go and stil not alowed to submid whit my xeon x5690 a 7 minut submission lost for Belgium if this cpu whil not be alowed. Sorry for the other whit cpu's thad ar moded in the database to gulftown. If my westmere-ep is not alowed, non westmere-ep is alowed or modded to gulstown in the database! NOT SANDBAGING OR A DICK,JUST MY OPINION !