xxbassplayerxx

Interested! Moving in July so that's probably a no-no for me.

Must have been a bug when opening Timing Configurator... I had to retake the screen shot after closing everything because I accidentally covered The CPU tab in the first SS. I'll check the original SS when I get home to see what it shows. If it's not a bug, I wonder if changing tRC from auto to 36 did it?

http://techreport.com/news/29789/a10-7890k-and-athlon-x4-880k-take-top-spots-in-amd-fm2-lineup 880K will be based on Excavator? Sounds like AMD Pi records are just around the corner if so.

Gotta get dem cash and hardware prizes, mang. "water cooling", y'know?

My highest run every time so far has been immediately after a reboot.

Wow... 5300 on water... What's the highest you can get XTU to pass without Slowmode?

Managed 738 on the Giga board. Here's to hoping in can manage 739 or 740. Anything above that is going to require more frequency.

Great sub Sniper! What BCLK did you set? XTU picked up your run at 4000 instead of 3990 and I'm curious as to why this happened.

Big update incoming. I managed to get 738 on XTU with my 6320. [hwbot=3151555]submission[/hwbot] The BIOS Settings that made it happen are below. Note that you have to manually set the RTL's for Channel B in Channel B Memory Sub Timings. Everything else should be grayed out. As you can see, there are still tons of settings that are on Auto. I'm going to begin to explore these myself but if anyone has any knowledge that you're willing to share, please let me know! By using the settings below, realize that you are voiding the warranty on many of your components and failure is a real possibility. Only use the settings below as a reference if you are aware of this. Advanced Frequency Settings CPU Base Clock 102.74 Host Clock Value 102.74 CPU Clock Ratio 39 CPU Frequency 4.01GHz FCLK Frequency for Early Power On [Normal (800MHz)] Advanced CPU Core Settings Extreme Memory Profile(X.M.P.) [Disabled] System Memory Multiplier [37.33] Memory Frequency(MHz) 3835MHz Advanced Memory Settings Extreme Memory Profile(X.M.P.) [Disabled] System Memory Multiplier 37.33 Memory Boot Mode [Auto] Memory Frequency 3835MHz Memory Enhancement Settings [Normal] Memory Timing Mode [Manual] Profile DDR Voltage 1.20V Memory Multiplier Tweaker Auto Channel Interleaving [Auto] Rank Interleaving [Auto] Channel A Memory Sub Timings Memory Timing Mode [Manual] Memory Boot Mode [Auto] Channel A Standard Timing Control CAS Latency 12 tRCD 12 tRP 12 tRAS 28 Channel A Advanced Timings Control tRC 36 tWR 10 tCWL 9 tRRD_S 5 tRRD_L 5 tWTR_S 2 tWTR_L 10 tCCD_S Auto tCCD_L Auto tRFC 220 tRTP 6 tFAW 16 Commmand Rate(tCMD) 1 N/1 Ratio Mode Auto Channel A Misc Timing Control tREFI 30000 tREFIx9 Auto tXP Auto tXPDLL Auto tPRPDEN Auto tRDPDEN Auto tWRPDEN Auto tCPDED Auto tAONPD Auto tCKE 4 RFR Delay Auto tXSDLL Auto tXS Offset Auto tZQOper Auto tMOD Auto tRDRD_sg 6 tRDRD_dg 4 tRDRD_dr 5 tRDRD_dd 5 tRDWR_sg 12 tRDWR_dg 12 tRDWR_dr 12 tRDWR_dd 12 tWRWR_sg 6 tWRWR_dg 4 tWRWR_dr 4 tWRWR_dd 4 tWRRD_sg 25 tWRRD_dg 17 tWRRD_dr 5 tWRRD_dd 5 Round Trip Latency(DIMM0/Rank0) 59 Round Trip Latency(DIMM0/Rank1) Auto Round Trip Latency(DIMM1/Rank0) 49 Round Trip Latency(DIMM1/Rank1) Auto IoLatR0D0 4 IoLatR1D0 Auto IoLatR0D1 6 IoLatR1D1 Auto IoLatOffset Auto ODT Read Duration Auto ODT Read Delay Auto ODT Write Duration Auto ODT Write Delay Auto Read ODT(DIMM0/Rank0) Auto Read ODT(DIMM0/Rank1) Auto Read ODT(DIMM1/Rank0) Auto Read ODT(DIMM1/Rank1) Auto Write ODT(DIMM0/Rank0) Auto Write ODT(DIMM0/Rank1) Auto Write ODT(DIMM1/Rank0) Auto Write ODT(DIMM1/Rank1) Auto ODT Override(DIMM0/Rank0) Auto ODT Override(DIMM0/Rank1) Auto ODT Override(DIMM1/Rank0) Auto ODT Override(DIMM1/Rank1) Auto RttNom(Dimm0) Auto RttNom(Dimm1) Auto RttPark(Dimm0) Auto RttPark(Dimm1) Auto RttWr(Dimm0) Auto RttWr(Dimm1) Auto WR Additional(Dimm0/Rank0) Auto WR Additional(Dimm0/Rank1) Auto WR Additional(Dimm1/Rank0) Auto WR Additional(Dimm1/Rank1) Auto Decrement WR Delay Auto Additive Latency Auto Output Driver Impedance Control Auto CS to CMD/ADDR Latency Auto C/A Parity Latency Auto Channel B Memory Sub Timings Memory Timing Mode [Manual] Memory Boot Mode [Auto] Channel B Standard Timing Control CAS Latency Auto tRCD Auto tRP Auto tRAS Auto Channel B Advanced Timings Control tRC Auto tWR Auto tCWL Auto tRRD_S Auto tRRD_L Auto tWTR_S Auto tWTR_L Auto tCCD_S Auto tCCD_L Auto tRFC Auto tRTP Auto tFAW Auto Commmand Rate(tCMD) Auto N/1 Ratio Mode Auto Channel B Misc Timing Control tREFI Auto tREFIx9 Auto tXP Auto tXPDLL Auto tPRPDEN Auto tRDPDEN Auto tWRPDEN Auto tCPDED Auto tAONPD Auto tCKE Auto RFR Delay Auto tXSDLL Auto tXS Offset Auto tZQOper Auto tMOD Auto tRDRD_sg Auto tRDRD_dg Auto tRDRD_dr Auto tRDRD_dd Auto tRDWR_sg Auto tRDWR_dg Auto tRDWR_dr Auto tRDWR_dd Auto tWRWR_sg Auto tWRWR_dg Auto tWRWR_dr Auto tWRWR_dd Auto tWRRD_sg Auto tWRRD_dg Auto tWRRD_dr Auto tWRRD_dd Auto Round Trip Latency(DIMM0/Rank0) 59 Round Trip Latency(DIMM0/Rank1) Auto Round Trip Latency(DIMM1/Rank0) 50 Round Trip Latency(DIMM1/Rank1) Auto IoLatR0D0 4 IoLatR1D0 Auto IoLatR0D1 6 IoLatR1D1 Auto IoLatOffset Auto ODT Read Duration Auto ODT Read Delay Auto ODT Write Duration Auto ODT Write Delay Auto Read ODT(DIMM0/Rank0) Auto Read ODT(DIMM0/Rank1) Auto Read ODT(DIMM1/Rank0) Auto Read ODT(DIMM1/Rank1) Auto Write ODT(DIMM0/Rank0) Auto Write ODT(DIMM0/Rank1) Auto Write ODT(DIMM1/Rank0) Auto Write ODT(DIMM1/Rank1) Auto ODT Override(DIMM0/Rank0) Auto ODT Override(DIMM0/Rank1) Auto ODT Override(DIMM1/Rank0) Auto ODT Override(DIMM1/Rank1) Auto RttNom(Dimm0) Auto RttNom(Dimm1) Auto RttPark(Dimm0) Auto RttPark(Dimm1) Auto RttWr(Dimm0) Auto RttWr(Dimm1) Auto WR Additional(Dimm0/Rank0) Auto WR Additional(Dimm0/Rank1) Auto WR Additional(Dimm1/Rank0) Auto WR Additional(Dimm1/Rank1) Auto Decrement WR Delay Auto Additive Latency Auto Output Driver Impedance Control Auto CS to CMD/ADDR Latency Auto C/A Parity Latency Auto CPU Core Voltage Control CPU Vcore 1.200V Dynamic Vcore(DVID) Auto GPU Graphics Voltage (VAXG) Auto Dynamic VAXG(DVID) Auto CPU VCCIO 1.300V CPU System Agent Voltage 1.300V VCC Substained Auto VCCPLL Auto VCCPLL OC Auto CPU Core PLL Overvoltage (+mV) Auto DRAM Voltage Control DRAM Voltage (CH A/B) 1.900V DRAM Training Voltage (CH A/B) 1.850V DDRVPP Voltage (CH A/B) Auto DRAM Termination (CH A/B) Auto Chipset Voltage Control PCH Core 1.200V

Silly AMD... can never get the NB right Do you have unlocked control over this? Maybe these locked chips will consist of freezing to try to get NB up high.

Is that NB frequency correct or does it throttle?

You don't want to set 260 any way... that's extremely high for 2133! Try 160 as a good starting point. You should be able to lower from there as well. Often times memory manufacturers set extremely loose subtimings to minimize the incompatibilities with motherboards and uninformed users.

Get dat C10 at 1.85V!

So we need to get Bull to run it on the mOCF at 4133 11-11-11. 743 at that point?

Apparently it's mostly luck. Keep running 741 over and over again and it'll pop up at some point. I believe XTU likes a fresh restart as well. But it's crazy that the jump from 3850 12-12-12 to 4100+ 12-12-12 doesn't give that extra point by default

Could be a better photo (actually showing the unit lol), but it'll do.

lol Splave that's never been more relevant.

We need to petition the other manufacturers to unlock this! It ain't pretty for them

I've never done the big glob of paste but I do still have the glue on mine like you do. I think that's the key :celebration:

Great!

Hi @loul, can you please provide a photo of the unit with your user name, the date, and HWBot?

A heat spreader the size of the PCB would definitely help prevent PCB bending--great idea!

Gonna have to do that last part on a mill instead of a lathe.

So here's my finding on my 6700K... Absolutely no crack the three times I froze it. I delidded it, left all black residue, used Kryonaut under the die and between pot, and tightened all down tight. All of that, and I was running full pot, -192 or so, without issue.

Pending