speed.fastest

First Competitive Overclocking from 2010 with KOC2 Forums, but first LN2 session is back than in Country Cup 2013, did WR with my friends (Hazzan, placid, xgamespati, and fahmi_thebull, rhodie, yash_yulian, tashim, bambang some other) at STMIK AMIKOM Yogyakarta. All of them is great teacher and friends placid`s HWBOT Prime score: 4447.23 pps with a Core i3 540

Strong efficiency

Great WR!

Noice CPU!

Thanks marc!

Thanks

Hi, how this after 43 minutes still no points & front pages?

Thanks Suzuki, Hideo

Strong result! Yesterday try 3 chip limited to 6775mhz, it looks like need venom to go above that.

Yes it is, but it seems all of that CPU is same limit at R15, 6775MHz, maybe limited by pot

Indomie CPU L639G vid 1.120v no CB no CBB 7.1GHz 1.94v valid Fullpot -185 Celcius speed.fastest`s CPU Frequency score: 7105.18 mhz with a Core i7 7700K SuperPi 1M 7020MHz 1.94v Fullpot -182 Celcius speed.fastest`s SuperPi - 1M score: 5sec 47ms with a Core i7 7700K

Your chip looking okay, but is your vid right? Because it maybe one of the highest vid on Kaby Lake i've ever seen until now.

I've had PSC that cant boot above 2400 8-12-8 1T or 2400 8-11-8 2T. Voltage around 1.85-1.93v. Put fan on the mem can help stability on high voltage. The kit is gskill eco 1600 7-8-7 1.35v green pcb.

Not always good, but seems all L639 scaling better on Cold than L643 (Its great on Air but not scaling good under cold).

Can i post Kaby result here? speed.fastest`s SuperPi - 32M score: 5min 54sec 125ms with a Core i7 7700K

WR of the Year so far, so perfect.

Strong! Does Venom make the difference?

Is the OS tweak? Very good job & CPU, well done

If you want to bin many kit better take 3200 c14 or 3600 c16/15. If not binning take 4133 or 4266.

Your CPU looking good, just had thermal limit, if your CPU is soldered i think it will fly under load. Unfortunately CPU core temp cant detect under 0 so we cant check delta temp between core & pot.

Awesome memory clock!

Great Score! Very nice

Whats your best b-die do at 3866 1.35v? This is G.SKILL 16GB 3600 16-16-16-36 1.35v XMP Mine 3866 17-17-17-37 1.35v (1.344v real) 3866 16-16-16-36 1.35v (1.344v real) error at 41.1% HCI Memtest

It works, but you need install Asmedia USB 3.0 driver to make it works. BTW the new BIOS (3201) exposed my Maximus VIII Gene capabilities, before this its not possible.

I agree with SI, start benching straight at full pot is better, even if only 1.6v vcore, less cracking possibilities. Almost all Skylake/Kaby Lake can run fullpot. Even if you do to many go up and down temp hotter than -135C you have possibilities to crack.