subaruwrc

those dragons are nice

5757 backupz ?

So its make some sense to use as low bclk as possible thx

interesting bclk choice.Did it helped with stability ?

2nd session without cracking,with the method I described.

bump

congrats on spoiling this one that fast.. lol

great run!

Thanks man! yep,firstly I tried with these two little pieces then went further and covered the whole pcb.It needs a layer of tape anyway to keep the moisture away from the socket pins.Only thing I was care of is not to overlap the tape so there won't be a similar surface.Looks like it worked,but slow pouring is needed.Only went down to full pot when tried to run 6.3 hwprime at 1.85v.

Hi! Seems like I'd found a good solution for fullpot benching.The idea was to not put too much pressure on the cpu circuit board as we know its thin so changes shape easily. I was thinking about the possible cause of cracking for two days straight and it seems I was right in one way.It can be caused from the deformed pcb not making even contact with the ihs. In this session I put one layer of dielectric tape next to the die to support the ihs and not push out all of the TIM because I was thinking that its better if that whole thing freezes into 1 piece solidly. So my easy solution is to put some tape under the ihs to support it a bit,and keep the factory distance from the die,apply more paste than you would normally,and put light pressure on the pot.It depends on which pot you have,but I have an Xtreme ONE which is a 4,4kg beast so It doesnt need any additional force.OH and I put a little mx2 paste under the side of the IHS like the factory glue,so It froze together solidly,and no crack until -180c which gave me additional 100-150mhz 4c/8t benching.. Next thing we should think about is how to support the inner section of the cpu,so it doesn't bend into the socket,so we can use more force on the pot which could make even better contact. just my two cents..

teach me that

sick!

That could be a 8g chip with proper settings and more volts bro U still have it ?

You have the 267*30 spi 32m don't you ?

How can you always go without cracking ?

TNKS mate. plx chip gives huge latency and bad eff ...

Heyyy! deepcool huh ? keep pushing up to 2v mate

epic sub run the cpu test again maybe.

epic,keep pushing!

its time to let it go ..

lol,usual trolling. Not as I would be a big competition in that 102.9bclk race on water,was just a question which I think was bothering someone else too in the era of wrappers and youhavetovalidateyourselfwitheveryshitucanfind,and there is that bench in which you dont even need a screenshot to prove.thats the funny,not your joke

Don't get me personal,but these no screenshot,no memory setting avaliable/hidden settings xtu results drive me mad.. and btw they are on the lower edge of validity in my point of view.Memory settings should be visible no?

pictures are a must for selling your stuff. with your name written on a piece of paper too.with hwbot word and the date with the thread created..

Im looking for a very good ht ref clocker 790fx board.preferably GIGABYTE or DFI if available,but Im open for other items aswell.A proven 430-450ht ref clock benchable would be good.More in PM! Shoot me one if you have something. thx Adam

you have to give more detailed information about your product. e.g. you have to put a paper on the item,with your name and current date of thread written on it. how you accept payments,where are u selling it ( EU,US) etc. read the rules and redo this pls.