TASOS

Well done , good score !

I'm sure there could be an exception for us hwbot fans. After all , we are probably talking about a minor coding modification.

It's very usefull to see the real fps during the benchmark run ... and NOT when finished.

@FM_Jarnis Is it possible to slightly mod , the most beloved Futuremark benchmark , just to show , the on screen FPS over 999. I assume it's only a minor coding modification. Is it doable ?

Bump. Any news about the 6core (8core) matter ??? and also about the 7870 ?

Take out of your calculations ALL the engineering samples ... and then look at your stats again.

There's even a much more easy move to do. Simply leave-out the 8cores and replace them with the 6cores. This way , there are plenty of options for hardware , including the 6core Haswell-E models

For all stages and not for a particular one , it would be nice to have more hardware options , than the obligatory submissions. Meaning that , a poor team with no resources , that doesnt have a superWoW Haswell-E ... CAN STILL compete with a 6core cpu , even with a SandyBridge-E So , 4 cpu categories permitted but only 3 submissions are required. The same should apply for the rest of the stages too. Give a bit more hardware options.

Why did you left-out the 6core cpu's from both stage2 and stage4 ??? Please add them. Also , i agree about adding 7870 in stage3. Thanks

Usefull article. Thank you.

That's a good point.

Just for the history Can you show us the entries of about 30sec before the deadline time ? Can you show us even the deleted entries ?

Is it a fault of the people who organized this event or the people who commited to make it happen ? I dont really know. But the result is ... Shame and lame. People with a cause on their mind will always find ways to spoil the true spirit of a competition. Sorry Hwbot ... but you dont deserve this kind of image given. Sometimes it's better to stop an error beeing ... than waiting for it to end.

So ... stage1 is only for X99 boards and single vga stage2 is only for Z97 boards and no limit on vga's ?

Very good job done and usefull data given. Thanks

Now that you said so , it must be it. I didnt recall , that there was a decision about removing those kind of points.

Trying to figure-out why my team lost about 300 points since yesterday. I cant find something obvious. Can somebody from hwbot staff , have a look ?

Are we expecting a fix for this issue ? Something quick ?

Perhaps he miscalculated the scale. 0.2 is not normal , but 0.02 is. Anyway ... actually there is a difference in voltages. Set in bios Vcore=1.36 Vdimm=1.80 Read in bios (MIT health screen) Vcore=1.368 Vdimm=1.812 Read in Windows (Tweak Launcer B14.0916) Vcore=1.359 Vdimm=1.80 Measured in reading points (with multimeter) Vcore=1.379 Vdimm=1.82

I believe 2.1volt is enough for short tests and quick benchmarking.

There is something wrong with his system lately. There was an other blocked score from the same? system yesterday.

Aaaannnnnyyyy way. At least now , going throught that route , you have all the fields required for a proper submission. http://hwbot.org/submission/2649473_ BUT ... "ο προγραμματιστής είναι Πόντιος , δέν παίζει άλλο σενάριο" :ws: :celebration:

Now the other way arround ... I go to submit from the oc-esport link http://oc-esports.io/#/round/roadtopro_challenger_season0_division2_round1/1729/xtu_5ghz At the buttom of the page there is a submit button. When pressed you get an instant error message You say "what the heck" ignore it. At least , there is an image verification field ... and system pic too (yupi ya ya):banana: You start filling all the fields , with your system specs ... Hey , wait ... there is NO field to upload the XTU data file !!! You say "what the heck" ignore that too. Let's press the submit button at the buttom of the page. Guess what ? It takes you back to HWBOT XTU submission page ... to upload the data file. And all the fields you filled earlier with system specs , are gone. You start all over again.

Have a look again ... you are driving me crazy There is no such tab. No TAB for uploading a verification picture. New submission , two pics included (bench screenshot and system pic) ... Nothing changed !!! http://hwbot.org/submission/2649460_ When i press edit at the right side of the page (inside the yellow marked area) i get an http error. When i try to edit from the top of the page (under options) i get into editing , but there is no image verification field. Look at my pictures.

Sorry , but We are talking about XTU here. There is no obligation for validation screenshot in this bench. You just upload the data file and a system picture. http://hwbot.org/submission/2645657_tasos_xtu_core_i5_4670k_1086_marks ??? The link you quoted me is for FS extreme.