nickolp1974

You need to post pics of items with your name and date as per rules

Thats good to know, only does it on mine with 12-11

I shall try that thanks, only happens at high mem frequency and 12-11-11

9c water

Chocolate HobNobs a must then for decent price?

Got an F1 dark in black which has been used 3 times since brand new and looking to swap for a Venom.

Its only an old cool box, a £20 pond pump and tap water.

re test of L643G240, delid, liquid metal, water 18c, VID 1.152v LLC6 have had a quick LN2 test but no screens, took an age to figure voltages, requires very low internal volts! best mount i had cracked probably due to the hours of finding right settings, remounted several times but delta was crap 35c+ still managed upto 6.7g R15, then board had had enough, so once all sorted it should be circa 6.8g, should be able to re-test this week sometime 50 51 52 53 54

Not sure what the 00 02 only a clr cmos worked to get rid for me. Cold testing yesterday and something came up on screen about MEI, boot into OS at defaults and always shows 4200mhz now(7700k) tried on 3 OS, 2x bios and a reflash, not sure if boards screwed, will test some point today.

A couple of days and it will be, it does look promising and not all are created equal.

Batch# L643G VID 1.156v On Apex LLC set to level 5 X45 cache, 3600 mems 5000 mhz 1.184v 5200 mhz 1.285v Not delided and on water

Or use nail varnish if your into that type of thing.

Z170 MOCF, bought in April 2016, benched on LN2 twice, Vas cleaned off, boxed with all bits. Booted b-die 4133mhz 12-11-11-28-1t 49/6/50/6 on ln2 no probs. Also 2x8gb Tridentz 3600mhzC15, nothing special but does 4kC12 no probs

Sure you both are very welcome to join in. As for pots check the classified section here or place a wanted add, they do occaisionaly come up on ebay so keep looking! A very good way to get into subzero benching is with a phase unit, although these can be costly but some bargains can be had but still work out cheaper for time used when overclocking at subzero temps, a very good learning platform imo. Or of course come along to the next bench meet and try for yourselves, lots of info available so please do ask.

@Doug2507

Not the slacker i once thought..... 2D ftw! Nice joe nice

Be my guest, i personally dont have the time. Or could a link be made in the OP to a specific post with all the data??

Still no boards in the UK, but hopefully very soon! Nice guide Dan, thanks for posting

Nice one Luumi

And dont forget the

Nice work Gav, congrats!,

What you used to do is what i have been doing and getting cracks/issues, starting loading at around -100c and keep running till full pot, at 6.6ghz almost guaranteed crack! Going to try your method next time once i have apex, thank you.

Straight to full pot and run?

Monster!

Looking very good, gotta be sub 1.2v after