GtiJason

http://forum.hwbot.org/showthread.php?t=145035

Killer efficiency !

Should be 2 x 8gb 3600c16-16-16

This is your 330 euro fire sale cpu right, I'll take it. Ba-zinga! Great work Alex I'm a little jealous

SuperBiz has em for $198.99 + $2.99 S/H

Damn, you racked up 670 HWB Points in 45 days using watercooling. I'm surrised your rig didn't explode pushing 1.815v core on 6600k, must be some cold water

Mine is pressurized and is kept indoors in spare bedroom, it has a relief valve that is one way and opens when pressure is over 5 psi. It also has a cable connecting to the dewar handle in case of failure, the top is just a compressed rubber stopper and will pop off way before there's enough pressure to pop the dewar itself. Very convenient but needs to sit a day before pressure is built up enough to pour, but if I'm looking to use right away I just ditch the top and pour by tipping. Mine also has a gauge to show the psi and the valve can be pulled out a bit to relieve pressure or removing the top

Sorry first kit sold within 5 minutes of typing that, and 2 guys are trying to buy last kit already

Feeling the TGrizz love ! Only used when benching with Iwamotto . . .LHe 4 Lyfe !

With the recent info posted about Pascal and BW E everybody pinching pennies until release. That said I'll give ya 50 peso's and a stick of bubble gum

Pretty much same problem here, though I did not reinstall or swap cpu's but I did swap to 3600c15's. Constantly getting unexpected kernal mode trap, I thought it had something to do with Boot.ini/BCEdit.exe because I had XP installed and Win 10 and was changing sata ports between Intel (achi Win10 ) and Asmedia (Ide Win XP) after boot screen where it asks if I want to boot 10 or older OS's. Seemed to be working just fine with cpu and mems at 4g, but as soon as I pushed bclk all hell broke loose, even with mems at 1000 auto timings

Not much better than the c16 kits, but I have two kits that are waza stable 4000c12 49/50/6/6 at 1.855v and 1.87v respectfully. Edit, make that one kit now

Can't stress enough how important this is, try keeping them clean with contact cleaner only as long as you can so you don't have to physically touch the gold contacts. After a while without cleaning you will have to "scrub" lightly and I prefer a new or very clean tight weave microfiber or the white shop towels for this. I was about to sell a kit of hyko tridentx ddr3 on ebay because they were barely 2800c9 stable, cleaned the contacts and was able to run 2933c9 uber tight. Thanks for the nice kit Tapakah !

Yes, I too would like everyones best XTU datafiles as well for "research purposes" only. Hahahaha !

Single GTX 1080's faster than 980's in sli, one 8 pin, 2.1Ghz OC ambient cooling 67C. 8gb gddr5 X memory at 11600mhz. $599.99 or about $50 more for founders edition with Transformers style reference cooler. GTX 1070 msrp $379.99 (429.99 founders) Faster than a Titan X, and also has 8gb gddr5 memory, though non X

Oh B die you son of a gun. I was playing around last night with a kit that's 4133c12 50/51/5/5 waza stable and couldn't even get XTU to run at any relaxed rtl settings that are more . Tried 51/51/5/4 ... 51/52/3/3 ... 51/52/4/4 ... 50/51/6/6 nothing. Win 10 32 bit, but unable to access msconfig

I've tried 5 kit's of B die on MOCF, all of them have been waza stable 4000 c12 1t and 49/50/6/6 rtls. The biggest thing is they all need different voltages. Obviously dram v (1.785-1.9v bios) but sa and io is different on all of them (sa volt 0.250-0.350) (io volt 0.200-0.350)

Haha, what a computer nerd ! Oh wait uhhh $h!t

My 6300 passes hwb prime at 45x 1.255v but R15 needed around 1.275v

Your good i3 does 4.8 HWBPrm on air, what is the vcore? Is this factoty sealed ihs or delidded, sorry so many questions just trying to guage if my i3 6300 is worth delidding. Just tested HWBPrm and it passes 4900mhz with 1.46-1.465v Full Win 7 64bit on AIO stock lid. Id imagine 5.0g is doable (1.485v failed) but chip runs crazy hot even stock and probably needs 1.515v to get there.

Just scooped up a i3 6300, 3800mhz stock and if I raise bclk multi drops to 37, any idea what I'm doing wrong? C states off, tried on and with/out EIST and Turbo Bios L1.21A Microcode 74

I used the official download from ASRock.com and it woks fine

Pricing is spot on, as long as they use an m3 nut like you say or a steel threaded insert to prevent thread stripping. I assume this price is for raw finish, will there be an option for anodizing or nickel plating or would that nearly double your price. No bid deal I already have a few items I'm looking to have done anyways, could just add them to the list Quick edit, will these be tapped/threaded to hold down ln2 pot such as ek triple point?

This is not really even a benchmark, there is a reason you didn't receive any global points for it, and it's not because you didn't include a single cpu-z tab on your screenshot