-
Posts
5781 -
Joined
-
Last visited
-
Days Won
59
Content Type
Profiles
Forums
Events
Blogs
Everything posted by websmile
-
Gigabyte Z97SOC Force legacy IC tests
websmile replied to websmile's topic in Memory Heaven (air/extreme)
Could be, I saw only 2666 c6 on cold and not too often. Shouldn´t matter too much for "normal" user and ocer though, only very few people bench with mems on cold and there are lots of alternatives. I made a last speed test at 4ghz before I unbuild system, no OS optimizations, board is at least competetive for 2d but still I am a bit slower than I was on last tests by competitor, save settings on mem and voltages -
Gigabyte Z97SOC Force legacy IC tests
websmile replied to websmile's topic in Memory Heaven (air/extreme)
Thanks, the board is better than its reputation at memory oc but Gigabyte still has room for improvement on Bios and compability, I didn´t regret buying it for the test session, in the end I liked it much more than I expected -
^^
-
Happy retirement, I am sure you won´t get lost - see you^^
-
Not satisfied with my 2000c6, Alex? Send them back, I will send you a triple kit as replacement, one stick fails specs
-
Gigabyte Z97SOC Force legacy IC tests
websmile replied to websmile's topic in Memory Heaven (air/extreme)
Yes, it might be my OS or I miss a setting, but I have impression that board is slower on 32m at same settings than asrock and asus, but you never know^^ Now with Timing configurator, 4690K and different mem kit -
Gigabyte Z97SOC Force legacy IC tests
websmile replied to websmile's topic in Memory Heaven (air/extreme)
Thanks, suzuki, I will do a few more tests with other cpu most likely and publish results using timing configurator^^ if I find the time -
Hi and welcome to my small thread Lately I remembered how I started overclocking, and that it was on a socket 754 Gigabyte board with Nforce3 chipset. Seeing that i haven´t used a GA board for nearly four years now, I decided that it may be a good decidion to end the oc era the way I started it, and I bought a Gigabyte Z97X SOC Force retail board to do some tests. This is what I got, the imc of this random Pentium 3258K is quite weak, but hopefully I can give you a small overview of what the board can do on mem oc and that I indeed had fun Hardware used: Gigabyte Z97X SOC Force retail, Bios x04 and f6 loaded from internet Intel Pentium G3258K retail Megalhalems cpu cooler Crucial SSD 2x2GB G.Skill 2400c9 retail(PSC), 2x2GB G.Slill RipjawX 2133C8 retail(BBSE) and 2x2GB Corsair Dominator GT 2000 7-8-7-20 retail(Hyper), G.Skill RipjawZ 2x4GB 2400c9(Samsung) for imc and profile tests only Mushkin PSU First I started with f6 Bios which the board was delivered with, unfortunately I wasn´t able to boot twcl6 with any mems and ics, because of this made a fast test on cpu abilities and then changed to Bios X04 I found on the internet, this booted and ran tight settings twcl6 for me Test 5ghz CPU 32m 1,4v mem auto Bios F6 First test I did was on Samsung to see if IMC does 2800, this worked. Samsung result 2800 9-12-12-21 1,99v, loose rtl Then I started with psc, using a kit for pretests 2400-2666 and trcd boot tests, on this imc of the Pentium showed big weakness, stable limit was around 2700 8-12-8, when I tested 2750 and 2800 the vga driver failed at win load, which was clear sign for imc or memory fail, with mems pretested for 2750 32m and higher, the blame is easy to put on imc, which failed same settings at other board as well. All results with all mem kits are obtained with memory and cpu on air cooling normal ambient temps, not all voltages are minimized Due to Bios X04 not working with pentium K core oc from bios, I raised multiplicator with software. PSC results 2667 8-12-8-28 tight 32m 1,77v 2702 8-12-8-28 tight 1,81v 32m Validation 2800 C8-12-8-29 1,89v, 1m worked, 32m failed http://valid.canardpc.com/zh32s1 BBSE result, 2600 worked, 2667 failed boot at any voltage, might have been to lack of skills or imc power but kit ran 2667 tight on various boards and cpu at z77 and z97 on other boards 2600 8-11-7-22 tight 1,88v Elpida Hyper results 2000 7-7-6-20 1,58v not minmized 2200 7-7-6-20 1,75v Generally, the board did a good job and I had lots of fun. Results shown were obtained with only a few hours of testing and a random CPU with not too good imc. I also tested some of the profiles, and I can´t recommend to use these, the samsung kit I used failed both profiles (2666 Samsung profiles) in spite of doing 2800c9 with hand dial and above 2800c9 on other boards, the 2667 tight psc profile set the main timings to 8-11!-8-28 twcl, the trcd of 11 on air for psc might be doable with handpicked vendor kits but for sure not with retail rejects vendors sell^^. The 2400-2600 PSC tight profile was not too bad and proved to be bootable and also might provide help for users without experience Thanks for reading, I hope my small test was fun for you, all hardware used was retail, all results are on air, maybe it can give some support for normal ocers who want to use this board.
-
NOOOOOO, Luumi, they are mine - you have too much PSC anyway
-
^^
-
^^
-
Vivi - Core i7 4770K @ 4500MHz - 1205 marks XTU
websmile replied to saint19's topic in Result Discussions
Damned, I already pretested psc for 2800 8-12-8 XTU and then forgot deadline - good run -
9800GTX is there, it has been merged years ago with 9800GTX+ because both are same cards with slightly different clocks, which is why you see the (+) put in bracelets
-
There is a tab hardware at hwbot, if you can´t find an item directly you go there and invest 3 seconds of time^^ http://hwbot.org/hardware/videocards#key=nvidia_geforce_9_series
-
Good morning, I´m searching for G.Skill 2400c9 PIS kit, possible other targets might be 2300c8 or 2400c8 kit of same series. Shoot me a PM with your offer, payment would be done with Paypal Best regards
-
Lucky_n00b - Athlon 5350 @ 3129MHz - 16min 50sec 203ms SuperPi - 32M
websmile replied to ablech's topic in Result Discussions
Good job, now you can retire from Kabini -
pipes - Radeon R9 290X - 14784 marks 3DMark - Fire Strike
websmile replied to Joa3d43's topic in Result Discussions
Same as 1 gpu, just chose 2x in front of 290 x when you fill the submission form -
Dinos22 - A10-5800K @ 4998MHz - 14min 11sec 16ms SuperPi - 32M
websmile replied to robbo2's topic in Result Discussions
Amazing how big northbridge freq influences speed on amd -
marcus_T - Core i7 4790K @ 5000MHz - 1270 marks XTU
websmile replied to nfszocker's topic in Result Discussions
Nice run -
So sad - maybe you should bench vantage or 11 which should give you globals with good card - wait, you need 6 or 8 core for this which is 1k - maybe buy 3770k and go for cheaper cpu bench am3
-
You need to bench old cards, not only free samples^^ - then you will see it is also good mem bench
-
AM3 rules - XTU is a not my favourite bench, on this I agree
-
The official HyperX OC Takeover 2015 World Finals thread.
websmile replied to Massman's topic in HWBOT Competitions
http://www.xtremesystems.org/forums/showthread.php?289993-HyperX-OC-Takeover-2015-World-Finals-Event-Info-and-Registration Should answer a few questions -
2667Mhz 32m for 60 Euros - tempting
-
Mems are sold and shipped. Can be closed and moved, thanks for the space HWBot