websmile

Sorry to hear that you no success with these, I know the pain - maybe I should give in on the search, it is obviously impossible mission

1155 is fine, if you can you want further confirmation you can test these for 2200 7-7-6 on 1150 and 2400 8-8-8(7-8-7 or 7-8-8 if possible) as well, 1150 usually is harder on trcd so you can see absolute limits on these faster. Make sure to use good cpu clock (4ghz and above) to make sure you get best out of your kits, some Hyper can´t take higher bandwidth on new systems and therefore it is also a way to determine quality

What can the 2200c7 and the Patriots do? Ivy Bridge or Z87/Z97 results would be helpful

Bump - open for each set of good pretested or good specced mems now

You have enough Blades, Dusan, time to give it a go

Very nice

You get too much golden cups - great result^^

This is impressive result ... grats

No recommendation on that, just the advice that if you want DDR3 memory for benching, go for dual sided sticks, your 2400C9 TridentX are good mems for example

Hynix MFR are single sided because these are 4gbit ICs, 8 ics make 4gb stick. The bandwidth problem is well known and is related to bank interleaving iirc, you will find information on this on the internet at I think even here at forum

Apart from that the 2666c11 are single sided, which will cause more loss on bench-performance on top due to a major bandwisth penalty you get from this compared to dual sided sticks

Tell us more about your sale

Thx for the info, this makes the chip look better

Nice run, don´t let them steal your chip - I see vultures circling

Sold, payment received - pllease close and move, thx for the space, Hwbot

@subaruwc - did you test on win7 or 8? The chip does much worse than mine on air, I am really surprised it runs that high on LN2

Found what I searched for it seems - not

Can you boot 106,8 with low mem divider like 1600 or 1800? Set setting hiigh bclk and sb pll in bios, this helps bclk oc. And I had similar problem once, there vga could not do higher pci-e frequency that comes with bclk oc, maybe you can can change graphic card if other stuff does not help

Trollolol

Sorry, I have no fourth stick or another kit I could put on top at the moment

Search in your drawers and closets, maybe you will find more stuff

Hi, on sale is one of my recent test samples, all three sticks work flawless and are passed Memtest86 as well as several tests in windows 3x2GB G.Skill Perfect Storm DDR3-2133 CL9-9-9-24 (F317066CL9T-6GBPS) Genuine triple kit, follow up serialnumbers, all three sticks work quite even, good trcd limit of at least 2300 at 9 and above 2500 at 10. KO8117 PCB, ICs are Elpida BBBG/BBSE which work around the same. One stick obviously lost an SMD at transport to me, but works without problems, I tested the kit in various combinations for 1105 7-9-7-24 1,62v, 1143 7-9-7-24 1,66v, 1200 7-10-7-24 1,75v and also for 1000 6-8-6-24, voltages are not minimized completely as well as the trcd limits are not completely maxed. The kit boots and does 1m 1300 8-11-8-22 at 1,89v on M5F, but fails 32m, I didn´t push more and only tested if 1,95v boots and enters win to see voltage tolerance, which worked easily. Optical condition is ok, but not extraordinary, technical condition is excellent (no low voltage boot issues, no issues to take high voltage) Price 85 Euros shipped worldwide sold Payment is possible with paypal, western union and maybe bank transfer within euro group, this would have to be discussed in pms. Item is located in germany, shipping will be with deutsche post incl. insurance and tracking, despite dpag raising prices again Best regards disclaimer: this is a private sale, because of this I accept no returns and provide no warranty. If you can´t deal with this, don´t buy

- my search pattern is tight, no plans to steal the Evos from you

No hope I will get something useful, but at least the thread is entertaining