Posted by Pepinorang on his Facebook, credit goes to Vivi. This fixes blackscreen bug benching and improves the ocability.

 

 

Edited April 30, 20196 yr by Leeghoofd

That is so much easyer than to have to epower it smile..

Thanks

This might be a silly question, but if you're running 4x CF on LN2, will all the cards need this mod or just the first card?

Edited June 16, 201410 yr by Gunslinger

This might be a silly question, but if you're running 4x CF on LN2, will all the cards need this mod or just the first card?

 

All cards, the reference voltage does more than just fix black screen. So it will help overall clock!

How much Volt is good under LN2 Vivi

1.3 eliminates all black screen on most cards. But feel it out from 1.25v. More volts than needed wont be good

1.5v is fine too

Polish guys allways a bit crazy on voltages lol:eek:

How much Vgpu is safe for Fullpot Card

1.9V

Lol DJ Went 1.55v today, was unshure about more

1.67 is what i ran. Full pot i cant do 1500 but -100 i can do 1590 maybe check if fullpot isnt hurting your clocks?

Fullpot was good to get Mem 1730 and gpu 20mhz higher

So need more voltage next time, im not happy with 1460 core

Also Vaux im unshure.

Hello everyone! I hope all is well. 

I was wanting to do the 0.95V rail mod to my Ref 290X but it seems that finding a picture for modded Ref cards  is kind of hard to find.  And the picture in the OP of this thread isnt working for me. If anyone could post a picture of a Ref 290X with the 0.95V rail mod or even a link to one, it would really help me out!
 

23 minutes ago, jessec0626 said:

Hello everyone! I hope all is well. 

I was wanting to do the 0.95V rail mod to my Ref 290X but it seems that finding a picture for modded Ref cards  is kind of hard to find.  And the picture in the OP of this thread isnt working for me. If anyone could post a picture of a Ref 290X with the 0.95V rail mod or even a link to one, it would really help me out!
 

 

1 hour ago, FireKillerGR said:

 

This is greatly appreciated!!

Just as a heads up for anyone getting into 290X lightnings, the pictures posted are for reference 290/290X GPUs

IIRC there is a simple MOD for MSI's AB software. It will allow you to increase the basic VGpu from 100 to 400.

Correct. you modify the startup shortcut of the program. Easy enough to do. VGPU is usually not the issue on the lightnings. Usually its the 0.95V rail and the need to increase this to keep from black screening.