tiborrr Posted March 22, 2015 Posted March 22, 2015 It works on retail 5820K, tried both mods. For 2nd mod I did it without external power device. Just connect it to VDDR MOSFET or coil and your VDDR = you "uncore signal voltage". MSI X99S XPOWER AC Before mod: 3700MHz After Easy 4G mod: 4100MHz After 4G+ mod: 4500MHz (1.6Vddr = 1.6V "uncore signal voltage") This CPU is capped at 4500, test on X99-DELUXE, will have to try with my 5960X. Quote
tiborrr Posted March 22, 2015 Posted March 22, 2015 I have used the wire from the 80-pin IDE cable (ATA66+), don't know what AWG gauge is that but it seems to be working without a hitch. Here you can see it connected to Vddr inductor: Thanks Roman for the mod! :banana: Quote
der8auer Posted March 22, 2015 Posted March 22, 2015 Nice solution with the VDDR! Glad it worked for you. Quote
tiborrr Posted March 23, 2015 Posted March 23, 2015 Hope this helps everybody for the upcoming MOA competition Quote
oldirdey Posted July 15, 2015 Posted July 15, 2015 Great Mod! Don´t know if anyone told you; the special heat resistant Tape you used for covering the pins is called "Kapton Tape or here in germany Kaptonband" Easy to get! Quote
nexxusty Posted December 22, 2015 Posted December 22, 2015 I cannot see this not working for a 5930k. Can ANYBODY verify? I have a window fogger repair kit I used for 775 BSEL mods. I'm sure it will work just fine for the lazy mod. Looking for 4ghz+, at 3.6ghz right now and it's just not enough. EVGA Motherboard.... never again. Solid (very solid), but lacking in options. Quote
unityofsaints Posted January 3, 2018 Posted January 3, 2018 is this mod still relevant? I have 5820K and SOC Champion. Quote
l0ud_sil3nc3 Posted January 4, 2018 Posted January 4, 2018 is this mod still relevant? I have 5820K and SOC Champion. You shouldn't need to do this if you have the Champion as it has an OC socket, it's ready to go. Quote
unityofsaints Posted January 4, 2018 Posted January 4, 2018 You shouldn't need to do this if you have the Champion as it has an OC socket, it's ready to go. Ahh cool, thx. OP mentions it also works on other OC socket boards so I thought it might also help on the Champion. Quote
macsbeach98 Posted January 4, 2018 Posted January 4, 2018 Set the CPU switch to OC mode and 3 extra voltages appear in the Bios from memory they are LV4 to LV6. Quote
unityofsaints Posted January 5, 2018 Posted January 5, 2018 Set the CPU switch to OC mode and 3 extra voltages appear in the Bios from memory they are LV4 to LV6. Cheers. Yep I see it and I got uncore to 4.3 Ghz-ish under SS so that seems reasonable. Quote
SparkysAdventure Posted April 8, 2023 Posted April 8, 2023 @SplaveDid you ever do any testing as to how high this voltage scaled? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.