RealBench Challenge 2016 - Challenge I Discussion

[websmile]

The rules were not changed, maybe you mess this up with formula series. First stage of realbench is limited to 4 cores, it was designed this way and is well balanced as you will see in the end. On graphics cards, only restriction is one graphics core used, so Titan X is allowed

[Wizerty]

Perfect Tks

[rockeur.alexis]

Hi, validations files are corrupt ? when i want to upload the score i have: Invalid data file: Unable to parse the datafile

[websmile]

Did you use the right upload and right benchmark? It is hwbot version, not realbench v2

[rockeur.alexis]

yep the hwbot version

[websmile]

Will be the old issue that you have to submit directly from the application and file save doesn´t work, I checked it again myself and had same issue

[stivut]

Just curious...what kind of cooling use Menthel and Wizerty:)?

[websmile]

When we are it - please note that minmum temp is 30 degrees celsius or more - enthusiast (real enthusiast league^^) cooling. The competition is open for all leagues, but you have to meet the requirements - tyia

[rockeur.alexis]

Wtf.... we need internet in a bench OS....

[stivut]

When we are it - please note that minmum temp is 30 degrees celsius or more - enthusiast (real enthusiast league^^) cooling. The competition is open for all leagues, but you have to meet the requirements - tyia

 

I think it's about load temperature... or not??

[rockeur.alexis]

If i understand well the rule, we just need to be up to 30° on load ?

[stivut]

If so, me, Menthol and Wizerty are ok with the rule!

[websmile]

I will check this again to verify. But when I see realbench load on cpu, 30 load is temp you can get on single stage

 

P.S. In the end all will have same limit, but it is of course important to set before people bench for nothing

Edited September 4, 2016 by websmile

[Wizerty]

@stivut my cooling is : 360 heatsink + 3x120mm @1600rpm (silent fan, not even beast) + EKWB on CPU + EKWB pump (look like a laing 18w).

You can see it on the picture. Only difference is heatsink was on my windows during night -> 20°C. And it's not even my best cpu, it's one I tested before selling it.

And din't use airconditionner.... so I swer it's 100000% legit, I won't start cheating after 6years and moreover not for an ambiant constest to win a mousse . not it will be funny when poele will start to submit 5.2Ghz run with 1.7v on air

[stivut]

Nice, good luck:)!

Mine is like you see in the picture, and never goes down from the desk:)).

[websmile]

OK, 30 degrees was intended to be minimum temp load and idle^^ - I will not handle this too strict, I accept 20 minimum idle if delta to load is OK, but I will not accept chiller temps like menthol offers, 1,5v and 6° is at least apprentice league cooling. Sorry that the rules left room for interpretation.

[stivut]

This is a good news:)!

[DrWeez]

must the temp monitor run during the benchmark to get "true" max and min?>

[websmile]

must the temp monitor run during the benchmark to get "true" max and min?>

 

Definitely yes, it will be same for all so no advantage or disadvantage for anyone, but I want idle and load, because of this start the monitoring before the benchmark starts

[Wizerty]

Good news . It's the perfect T° to bench during night these day

I will keep my 5.6Ghz run to last minute sandbag

[rockeur.alexis]

Ok for temps, now its clear,.

 

A question, if you forbid X99, why not forbid Titan Xp ?? This card is like a 6950x...

[websmile]

This decision was not in our hands, I am no fan of the titan pascal for ranking in general because for me it is no consumer desktop vga, but it is allowed. C´est la vie ^^

Good luck at benching, the result was very good

[Menthol]

Sorry about temps, rules seemed unclear at first, will make the adjustment. as for pascal, the opencl counts for the least amount in RB, or at least used to

[jpmboy]

every time i try to upload a datafile, it returns: "Unable to parse Data file" ??? wt?

[jpmboy]

nvm - gotta log in each time.