March 24, 20178 yr I got this Board yesterday. Its running good but i got postcode F3 4000 c12 on mem. Booting 4133 and 3866 is not a Big Deal but i cant train 4000 c12. Is there a solution for this issue? BIOS 0801,0701,0401 Cheers... Sounds like your RTLs are tuned wrongly. Are you using fixed values?
March 25, 20178 yr Sounds like your RTLs are tuned wrongly. Are you using fixed values? i didnt touch RTL`s by hand but i try to figure out some 4133 and 4000 c12 settings. i think it depends on command rate because it stucks at 1t
March 25, 20178 yr postcode 00 after allmost every warmboot. this didnt happen with skylake it just startet with my new kabylake. any idea ? doesnt matter if i do a retry, reset or safeboot. allmost all the time im running in 00. only solution is to cut power and doing a full start. Gesendet von iPad mit Tapatalk
March 25, 20178 yr Ahhhh your CPU is running but you get always 00 after success Boot... Sorry my Bad... But i think you can ignore this. I had the same behavior on some x99 boards Cheers...
March 25, 20178 yr didnt had this with skylake, and not beeing able to safeboot sucks with checking out max speed ramsettings, as i allways run in the same error after power off. Gesendet von iPad mit Tapatalk
March 29, 20178 yr Author does anyone have trouble benching with igp after enabling ln2 mode. When I hit like -40c I lose display when enabling ln2 mode. Is there something I have to be careful with when using igp for benching, for 2d. I remember some igp's dying but cant remember why. I remember it was high core pll that was killing the igp, and elmors guide says core pll max is 1.6v when using igp. So how do people bench 2d using igp? Edited March 29, 20178 yr by Strong Island
March 29, 20178 yr Do any of you have issues with Apex and low scores on xp/xp64 with gen 2 graphic cards in 3Dmark 2001/2003 ?Compared with z170 and similar settings gt1 is lower and 2001 overall gives lower score. Any magical settings for legacy ? Sent from my iPhone using Tapatalk Pro @elmor ? Anyone ?
March 29, 20178 yr Author @elmor ?Anyone ? does manually setting gen 2 in bios help at all? I havent gotten to 3d yet on Apex.
March 30, 20178 yr does anyone have trouble benching with igp after enabling ln2 mode. When I hit like -40c I lose display when enabling ln2 mode. Is there something I have to be careful with when using igp for benching, for 2d. I remember some igp's dying but cant remember why. I remember it was high core pll that was killing the igp, and elmors guide says core pll max is 1.6v when using igp. So how do people bench 2d using igp? AFAIK on Z170 you can't benching IGP with LN2 Mode Enabled. Try disabling it ^^
March 30, 20178 yr Author AFAIK on Z170 you can't benching IGP with LN2 Mode Enabled. Try disabling it ^^ im not trying to bench the igp, just trying to use it as display while benching, but cant see how possible on apex.
March 30, 20178 yr Yes its not possible SI using IGP with LN2 Mode, because LN2 mode will set core pll in not safe range for IGP.
March 30, 20178 yr Its normal? a little bit to slow how about mire dram usage. i use linx with full dram usage and get like 280gflops with 5ghz Gesendet von iPad mit Tapatalk
March 30, 20178 yr i use linx with full dram usage and get like 280gflops with 5ghz I have problem with DRAM. My Corsair Vengeance LPX 16GB Black [2x8GB 3000MHz DDR4 CL15 DIMM CMK16GX4M2B3000C15 workin incorrectly more as 258Gflops But i Have with http://savepic.ru/13382027.jpg
March 30, 20178 yr Author Yes its not possible SI using IGP with LN2 Mode, because LN2 mode will set core pll in not safe range for IGP. ok cool thanks. I heard it could help with some efficiency on some benches so wanted to give it a try, should have tried on air first. I'm really glad that safety is in place because I probably would have damaged my new cpu. Edited March 30, 20178 yr by Strong Island
March 31, 20178 yr i'm just testing a i3-7350k. this chip is okish with vcore for me. can run 5.2 on water and its not getting very hot. after hours im stuck with my b-die. cant get anything usable find which is more than 3600 even with xmp its not booting or unstable. now i can run 3333 with 12-12-12-28-1-280 but it dosent matter which voltage i use in io/sa/dram it doesnt work. tried 3 diff bdie kits all are usually running fine with 4000 even 24/7 4000 16 is fine but not with that i3. any clue? just potato imc or anything else i can try. ----- update checked with 1 dimm 4 different dimms all running 4133 even 4266 single in channel b1. non is running in channel a1. guess something is fucked up with my apex Gesendet von iPad mit Tapatalk Edited March 31, 20178 yr by ra773
April 15, 20178 yr Good question maybe xtu setting is a Kind of cheat for that xtu Benchmark haha noch idea just joking. Gesendet von meinem XT1562 mit Tapatalk
April 16, 20178 yr Noticed fast tight ram, hated XTU tweak option. eg 4000 cl12 wouldn't pass a single run for me at any level aside from auto.
April 16, 20178 yr Hello, I just purchased an apex, and I can not find any information about the bios present. 0401 Even on the site of asus there is not. Can you tell me more, ? And for o.c must i move on to another thank you
April 16, 20178 yr Hello, I just purchased an apex, and I can not find any information about the bios present. 0401 Even on the site of asus there is not. Can you tell me more, ? And for o.c must i move on to another thank you
April 17, 20178 yr Tried to install xp. Did all the steps like add fira and de ahci driver. But when installing it says it can't copy the firadisk.sys and all the other files. What am I missing here ?
April 17, 20178 yr Tried to install xp.Did all the steps like add fira and de ahci driver. But when installing it says it can't copy the firadisk.sys and all the other files. What am I missing here ? OEMPreinstall or Floppy support missing. It's in the guide for Maximus VIII.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.