Crew Leeghoofd Posted August 28, 2021 Author Crew Posted August 28, 2021 Nope, not valid. One of the reasons a full bandwidth test is required 1 Quote
Crew Leeghoofd Posted August 28, 2021 Author Crew Posted August 28, 2021 New Corsair Vengeance RGB RT and RS only allowed for Stage 2 and 3 2 2 Quote
SaskOCGuy Posted August 28, 2021 Posted August 28, 2021 (edited) On 8/8/2021 at 1:12 AM, Leeghoofd said: Thread cleaned , if you have issues with a particular service department this is not the right place to ventilate.... Corsair has a customer service department? Thanks for the info! ? Edited August 28, 2021 by SaskOCGuy Quote
Crew Leeghoofd Posted August 28, 2021 Author Crew Posted August 28, 2021 Stage 2 starts on the 30th of August, overlapping with Stage 1... 1 Quote
FUGGER Posted August 28, 2021 Posted August 28, 2021 I seem to be the only one with Micron modules ? Quote
GtiJason Posted August 29, 2021 Posted August 29, 2021 5 hours ago, FUGGER said: I seem to be the only one with Micron modules ? I've got Micron's as well (CMK16GX4M2D3600C18 V3.32) , but everyone else is using Samsung besides sabishiihito. He's using a kit similar to mine but actually made for Intel cpu (unlike mine) CMK16GX4M2Z3600C18 Hynix Have yet to sub mine as cpu (11900Kf) might be on it's way out so probably should use 11600k or 5300G/AMD Quote
Crew Leeghoofd Posted August 30, 2021 Author Crew Posted August 30, 2021 Stage 2: Memory Frequency To avoid detection problems with Cezanne CPUs, usage of CPUZ 1.97 is MANDATORY for this stage Screenshot matches the validation link, no % tolerance Stage 2 OC care package, to be downloaded at this link or via the attached file Stage2.rar 3 Quote
Broken APEX49 Posted September 1, 2021 Posted September 1, 2021 I envy you all. I regret that I don't own a Corsair DRAM. Quote
Arni90 Posted September 1, 2021 Posted September 1, 2021 On 8/28/2021 at 11:22 PM, FUGGER said: I seem to be the only one with Micron modules ? No you're not: https://hwbot.org/submission/4806581 Also, as long as those DIMMs are A2, you should be able to push higher. Just keep VTT at or below 0.7V Quote
GtiJason Posted September 7, 2021 Posted September 7, 2021 Is this correct ? Currently 9/6/21, 10:10PM Central Time here Quote
Crew Leeghoofd Posted September 7, 2021 Author Crew Posted September 7, 2021 yes under 7 hours left now 1 Quote
bob(nz) Posted September 7, 2021 Posted September 7, 2021 Damn - seems Corsair shipped all their DJR to Germany 1 Quote
Lucky_n00b Posted September 7, 2021 Posted September 7, 2021 Have to call GG on this competition, those DJR were very strong indeed! I tried to push the rev3.32 microns as hard I possibly could, frequency is priority for AIDA64 read but my DDR4-5466 18-24 wasn't enough to catch up the b-die level let alone DJR, got good learning experience out of it anyway. Waiting for the Lucky Draw then ? - keep pushing it bros 1 Quote
Crew Leeghoofd Posted September 7, 2021 Author Crew Posted September 7, 2021 3 hours ago, Lucky_n00b said: Have to call GG on this competition, those DJR were very strong indeed! I tried to push the rev3.32 microns as hard I possibly could, frequency is priority for AIDA64 read but my DDR4-5466 18-24 wasn't enough to catch up the b-die level let alone DJR, got good learning experience out of it anyway. Waiting for the Lucky Draw then ? - keep pushing it bros its not over yet!!! That's not the Alva I know, you must be an imposter ? 2 Quote
Lucky_n00b Posted September 7, 2021 Posted September 7, 2021 Just now, Leeghoofd said: its not over yet!!! That's not the Alva I know, you must be an imposter ? Hahahah still pushing for Stage 2, no worries Dad ? 1 Quote
Crew Leeghoofd Posted September 7, 2021 Author Crew Posted September 7, 2021 25 minutes ago, bob(nz) said: *edit - Grandpa.... says one old guy to the other, but darn sexy for their age... 1 1 Quote
bob(nz) Posted September 7, 2021 Posted September 7, 2021 1 hour ago, Leeghoofd said: says one old guy to the other, but darn sexy for their age... Haha - you smooth talker you Quote
Martin White Posted September 12, 2021 Posted September 12, 2021 (edited) <> Edited September 12, 2021 by Martin White deleted message Quote
Crew Leeghoofd Posted September 12, 2021 Author Crew Posted September 12, 2021 Overal view is limited to the first 30 persons, its on the to do list Quote
Crew Leeghoofd Posted September 12, 2021 Author Crew Posted September 12, 2021 Stage 3: Cinebench R23 with BenchMate per core Use BenchMate version 0.10.8 Dual Channel Submissions only. Screenshot with CORSAIR desktop wallpaper as background; CB23 render (can be partly covered), Benchmate score, CPU-Z 1.97 CPU tabs for Processor, Memory and SPD. Stage 3 care Package 1 Quote
Lucky_n00b Posted September 12, 2021 Posted September 12, 2021 51 minutes ago, Leeghoofd said: Stage 3: Cinebench R23 with BenchMate per core Use BenchMate version 0.10.8 Dual Channel Submissions only. Screenshot with CORSAIR desktop wallpaper as background; CB23 render, Benchmate score, CPU-Z 1.97 CPU tabs for Processor, Memory and SPD. Stage 3 care Package Need clarification : Showing all R23 window + the rendered screen without cpuz/benchmate obstruction mandatory? *If yes then probably need DSR/VSR to 1440p Quote
Crew Leeghoofd Posted September 12, 2021 Author Crew Posted September 12, 2021 Screenshot with CORSAIR desktop wallpaper as background; CB23 render (can be partly covered) in Rules and guide, added it here too 1 Quote
Crew Leeghoofd Posted September 27, 2021 Author Crew Posted September 27, 2021 Winner announcement: 1) Sergmann 2) Bullshooter 3) noliso 4) CENS 5) bob(NZ) Lucky Draw winner: IGB You received a PM gents 2 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.