August 28, 20213 yr Author Crew Nope, not valid. One of the reasons a full bandwidth test is required
August 28, 20213 yr On 8/8/2021 at 1:12 AM, Leeghoofd said: Thread cleaned , if you have issues with a particular service department this is not the right place to ventilate.... Corsair has a customer service department? Thanks for the info! ? Edited August 28, 20213 yr by SaskOCGuy
August 29, 20213 yr 5 hours ago, FUGGER said: I seem to be the only one with Micron modules ? I've got Micron's as well (CMK16GX4M2D3600C18 V3.32) , but everyone else is using Samsung besides sabishiihito. He's using a kit similar to mine but actually made for Intel cpu (unlike mine) CMK16GX4M2Z3600C18 Hynix Have yet to sub mine as cpu (11900Kf) might be on it's way out so probably should use 11600k or 5300G/AMD
August 30, 20213 yr Author Crew Stage 2: Memory Frequency To avoid detection problems with Cezanne CPUs, usage of CPUZ 1.97 is MANDATORY for this stage Screenshot matches the validation link, no % tolerance Stage 2 OC care package, to be downloaded at this link or via the attached file Stage2.rar
September 1, 20213 yr On 8/28/2021 at 11:22 PM, FUGGER said: I seem to be the only one with Micron modules ? No you're not: https://hwbot.org/submission/4806581 Also, as long as those DIMMs are A2, you should be able to push higher. Just keep VTT at or below 0.7V
September 7, 20213 yr Have to call GG on this competition, those DJR were very strong indeed! I tried to push the rev3.32 microns as hard I possibly could, frequency is priority for AIDA64 read but my DDR4-5466 18-24 wasn't enough to catch up the b-die level let alone DJR, got good learning experience out of it anyway. Waiting for the Lucky Draw then ? - keep pushing it bros
September 7, 20213 yr Author Crew 3 hours ago, Lucky_n00b said: Have to call GG on this competition, those DJR were very strong indeed! I tried to push the rev3.32 microns as hard I possibly could, frequency is priority for AIDA64 read but my DDR4-5466 18-24 wasn't enough to catch up the b-die level let alone DJR, got good learning experience out of it anyway. Waiting for the Lucky Draw then ? - keep pushing it bros its not over yet!!! That's not the Alva I know, you must be an imposter ?
September 7, 20213 yr Just now, Leeghoofd said: its not over yet!!! That's not the Alva I know, you must be an imposter ? Hahahah still pushing for Stage 2, no worries Dad ?
September 7, 20213 yr Author Crew 25 minutes ago, bob(nz) said: *edit - Grandpa.... says one old guy to the other, but darn sexy for their age...
September 7, 20213 yr 1 hour ago, Leeghoofd said: says one old guy to the other, but darn sexy for their age... Haha - you smooth talker you
September 12, 20213 yr Author Crew Overal view is limited to the first 30 persons, its on the to do list
September 12, 20213 yr Author Crew Stage 3: Cinebench R23 with BenchMate per core Use BenchMate version 0.10.8 Dual Channel Submissions only. Screenshot with CORSAIR desktop wallpaper as background; CB23 render (can be partly covered), Benchmate score, CPU-Z 1.97 CPU tabs for Processor, Memory and SPD. Stage 3 care Package
September 12, 20213 yr 51 minutes ago, Leeghoofd said: Stage 3: Cinebench R23 with BenchMate per core Use BenchMate version 0.10.8 Dual Channel Submissions only. Screenshot with CORSAIR desktop wallpaper as background; CB23 render, Benchmate score, CPU-Z 1.97 CPU tabs for Processor, Memory and SPD. Stage 3 care Package Need clarification : Showing all R23 window + the rendered screen without cpuz/benchmate obstruction mandatory? *If yes then probably need DSR/VSR to 1440p
September 12, 20213 yr Author Crew Screenshot with CORSAIR desktop wallpaper as background; CB23 render (can be partly covered) in Rules and guide, added it here too
September 27, 20213 yr Author Crew Winner announcement: 1) Sergmann 2) Bullshooter 3) noliso 4) CENS 5) bob(NZ) Lucky Draw winner: IGB You received a PM gents
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.