safedisk Posted October 19, 2022 Posted October 19, 2022 (edited) ROG CROSSHAIR X670E Series 0921 BETA BIOS 1. Update to AMD AGESA 1005c RC3 2. Improve System Performance New AGESA version has been applied, but there may be bugs. So please rollback to the previous version if you have any problems Thanks ROG CROSSHAIR X670E HERO BETA BIOS 0921 ROG CROSSHAIR X670E GENE BETA BIOS 0921 ROG CROSSHAIR X670E EXTREME BETA BIOS 0921 LN2 OC TIP Basically the same as AM4 OC Use the LN2 PROFILE, Depending on the CPU, the CB temp is different If you have -90 to -100c freezing problems after benching at -150C or higher, check Global C-state Control and DF Cstates option in BIOS (need disabled) Some cpus need restart after -30c to -40c cmos clear after freezing OC PACK OCTOOL : https://www.dropbox.com/s/l36xe4748s34p4t/c9_ocpak_0117.zip?dl=0 MemTweakit : https://drive.google.com/file/d/1vxWJwhKZ_4pVRmyKUW9Z3CYbZnPKRNB3/view?usp=sharing Edited February 21, 2023 by safedisk 1 4 Quote
flanker Posted October 19, 2022 Posted October 19, 2022 Thanks. Any tips for LN2, differents compared to Zen3? 1 Quote
d0minat0r Posted October 20, 2022 Posted October 20, 2022 find sweet spot between FCLK and Cold but this is similar like Zen3 Quote
Toolius Posted October 22, 2022 Posted October 22, 2022 (edited) anyone testing max clocks with 2 cores ? Edited October 22, 2022 by Toolius Quote
flanker Posted October 26, 2022 Posted October 26, 2022 not yet, I have SP116, so seems average chip. Quote
P5ych0 Posted October 28, 2022 Posted October 28, 2022 (edited) @safedisk Bios 0802 seems okay for LN2 also, but is there any chance to get a working safeboot button ? Edit: CB moved 10° down from -145 to -135 Edited October 29, 2022 by P5ych0 Quote
unityofsaints Posted October 28, 2022 Posted October 28, 2022 16 hours ago, P5ych0 said: @safedisk Bios 0802 seems okay for LN2 also, but is there any chance to get a working safeboot button ? Ask AMD instead, afaik it's their implementation that is broken since it was introduced with Ryzen 5000. 1 Quote
P5ych0 Posted October 29, 2022 Posted October 29, 2022 10 hours ago, unityofsaints said: Ask AMD instead, afaik it's their implementation that is broken since it was introduced with Ryzen 5000. i see. lets hope AMD can fix this because it sucks to cmos clear after every single crash 1 Quote
unityofsaints Posted November 2, 2022 Posted November 2, 2022 Do we still need to torch up to like +10 C to dial in memory like 3rd gen or is this part at least improved? Quote
lntwool Posted November 2, 2022 Posted November 2, 2022 803 is out if you want to test, you can follow this spreadsheet for all boards https://docs.google.com/spreadsheets/u/0/d/19gqxeeAdUmkwgE0EvH4MlJ7meeDbEHYP-FHYW-PMyOk/htmlview#gid=522016589 but there is a thread for the Asus x670e on asus’s forums links in doc. I have trained Mem around -85 /-100 c. Pro tip, disable memory context restore. Clear cmos. Train it cold. Shoot got -65 for initial training after cmos clear. Load ln2 profile or whatever profile you use. Dump bring her down to say -85, f10. Of course, depends on same, dimms, cpu sample. I’m hoping to post a score tonight that is maybe close to safedisk 3 Quote
flanker Posted November 15, 2022 Posted November 15, 2022 Seems, BIOS 0805 is relative fine! https://rog.asus.com/forum/showthread.php?130719-X670-resource Gene 0805 now Hero 0805 Extreme Strix X670E-E 3 Quote
huzidada Posted December 7, 2022 Posted December 7, 2022 (edited) Hey guys I have a new build with a 7600X, Gskill Trident 5 32GB DDR5 and the Asus X670E Extreme board and I cant get it to boot, just shows code 00 on the LED and the Oled shows 00 Memory I have tried everything including single RAM stick on multiple slots, reseating everything, BIOS flashback to latest bios, nothing helps, do you think its a memory problem, a cpu problem or a problem with this board? Edited December 7, 2022 by huzidada Quote
flanker Posted December 8, 2022 Posted December 8, 2022 How long did you wait for post? It takes some time, special first time...Also sometimes helps directly shutdown PC by power button and again start for better post. Also check, your DRAM is really inside correctly in the DIMM slot Quote
zippytek Posted December 13, 2022 Posted December 13, 2022 (edited) On 12/7/2022 at 11:37 AM, huzidada said: Hey guys I have a new build with a 7600X, Gskill Trident 5 32GB DDR5 and the Asus X670E Extreme board and I cant get it to boot, just shows code 00 on the LED and the Oled shows 00 Memory I have tried everything including single RAM stick on multiple slots, reseating everything, BIOS flashback to latest bios, nothing helps, do you think its a memory problem, a cpu problem or a problem with this board? Hey, here are a couple of things to try: -if you changed uclk mode to sync/async, set it back to auto (or sync if you have fclk and mem clock in divisible values) - e.g. fclk = 1600, mclk = 6400 -reduce fclk (or set it to auto if you changed it) -if you set manual DDR5 frequency/timings, or xmp, do the settings work for the above rules? if xmp is 6400, set fclk to 1600 etc. if xmp is 7200, reduce mem frequency to 6400 manually after setting xmp. **most am5 chips struggle to do more than 6400 but this may have improved with newer bios revs-if you're trying to boot above 6400, this might be all you need** In my experience, only 2 of my chips will run high fclk in async, but my 7900X maxes around 1800 and is happiest around 1600. 7950X does 2100+, 7600X same if all of this still gives 00, make sure your mem voltages are sufficient for freq/timings, then make sure things aren't too tight. hope this helps. GL Edited December 13, 2022 by zippytek clarification Quote
huzidada Posted December 15, 2022 Posted December 15, 2022 On 12/13/2022 at 11:04 PM, zippytek said: Hey, here are a couple of things to try: -if you changed uclk mode to sync/async, set it back to auto (or sync if you have fclk and mem clock in divisible values) - e.g. fclk = 1600, mclk = 6400 -reduce fclk (or set it to auto if you changed it) -if you set manual DDR5 frequency/timings, or xmp, do the settings work for the above rules? if xmp is 6400, set fclk to 1600 etc. if xmp is 7200, reduce mem frequency to 6400 manually after setting xmp. **most am5 chips struggle to do more than 6400 but this may have improved with newer bios revs-if you're trying to boot above 6400, this might be all you need** In my experience, only 2 of my chips will run high fclk in async, but my 7900X maxes around 1800 and is happiest around 1600. 7950X does 2100+, 7600X same if all of this still gives 00, make sure your mem voltages are sufficient for freq/timings, then make sure things aren't too tight. hope this helps. GL Hey there, thjs is a virgin boot, havent even seen the BIOS just stuck at 00 no matter what Quote
zippytek Posted December 16, 2022 Posted December 16, 2022 On 12/15/2022 at 6:11 AM, huzidada said: Hey there, thjs is a virgin boot, havent even seen the BIOS just stuck at 00 no matter what 00 like that usually indicates dead hardware. could be board or cpu maybe, have you tried doing a cmos clear? reseating the cpu? Quote
huzidada Posted December 23, 2022 Posted December 23, 2022 On 12/16/2022 at 6:02 PM, zippytek said: 00 like that usually indicates dead hardware. could be board or cpu maybe, have you tried doing a cmos clear? reseating the cpu? Hi there I have, have even sent the CPU for testing and its okay, so Im guessing motherboard 1 Quote
P5ych0 Posted January 9, 2023 Posted January 9, 2023 can anyone please share this Bios 0911 ? 3 Quote
Broken APEX49 Posted January 31, 2023 Posted January 31, 2023 Ryzen 7 7700 ROG STRIX X670E-I GAMING WIFI Kingston FURY Beast CL40 KF556C40BBK2-32 I am considering to enjoy overclocking here. Any other suggestions? Quote
Xtreme Addict Posted January 31, 2023 Posted January 31, 2023 14 minutes ago, GTI-R said: Ryzen 7 7700 ROG STRIX X670E-I GAMING WIFI Kingston FURY Beast CL40 KF556C40BBK2-32 I am considering to enjoy overclocking here. Any other suggestions? 7700 not X? 1 Quote
Broken APEX49 Posted January 31, 2023 Posted January 31, 2023 52 minutes ago, Xtreme Addict said: 7700 X じゃない？ It's not an X. It's a 7700. Is it worth a try? Quote
Xtreme Addict Posted January 31, 2023 Posted January 31, 2023 If you mean LN2 it's a locked multi CPU 1 Quote
Matt26LFC Posted February 11, 2023 Posted February 11, 2023 Anyone found that you have to clear CMOS after every crash and warm up on the Gene or am I missing something Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.