Jump to content
HWBOT Community Forums

Recommended Posts

Posted

I tried G7400 the other day and ran into the same problem, so can’t really help haha. I feel like such a noob with it on ln2. But when I ran 12300 it really “just worked”, and behaved like a typical alder lake cpu. So you might be right.

  • Like 1
Posted
On 10/3/2023 at 7:40 AM, OClockDoc said:

Do You need to bin CPU`s for CB? I tried two 12300/12100 and both didn`t work below -50C. They didn`t freeze at idle but in benchmark.

Ran exactly into the same issue with 12100 and G7400 on dry ice, when the temp got below -40 or -50.. then I let the pot warm up a little bit and could clock a little higher.

  • Like 1
Posted
On 10/3/2023 at 5:45 AM, Seby9123 said:

https://cdn.discordapp.com/attachments/1080843999021113464/1093244794391765053/ROG-MAXIMUS-Z790-APEX-ASUS-0022_uc09.cap

 

0022 + ucode 09 needed for bclk oc (that bios was ucode 15)

 

Also here is 1401 bios I used for bclk oc https://cdn.discordapp.com/attachments/1113803878014652469/1153675416201068574/1401bclk.cap 

 

If either doesn't work, let me know

Hey Seby thanks for the BIOS,

Did you have BIOS for BCLK OC + AVX-512 enabled for some i3 12100 4c fun?
Or it is not possible with Z790 boards?
My Z690 Apex sadly has damaged for rebenching that category.

Many thanks  & congrats for the 14th Gen Day-1 records on Asus HQ.

Posted

 

24 minutes ago, IvanCupa said:

Hey Seby thanks for the BIOS,

Did you have BIOS for BCLK OC + AVX-512 enabled for some i3 12100 4c fun?
Or it is not possible with Z790 boards?
My Z690 Apex sadly has damaged for rebenching that category.

Many thanks  & congrats for the 14th Gen Day-1 records on Asus HQ.

that 0022_uc09 bios is what you want, avx-512 was part of every ucode till after ucode 15, so the BCLK bios also has it.

 

If you want, you can test this modded bios made of a late beta https://cdn.discordapp.com/attachments/1109331822212558959/1163880712957595739/0043ucode09.cap?ex=65412f61&is=652eba61&hm=494960b56099e4cfad47dc3336dbaa8e2ca1994242b2b14e4a14f716b3322387&

 

Thank you! It was a lot of fun!

  • Like 1
  • Thanks 1
Posted

Help! So. Been testing som new 2x24GB G.skil kit with z790 Apex, and I have encountered a strange issue never experienced before..This is when running 8600 c40. The second I press Aida 64 read , Memtest or Kharu, the OS lock up completely. Only safe boot works at this point… This when running Auto SA , around 1.32V , and only way I can run one of these above mentioned applications is if I lower SA to 1.15V ?? Why ? Have cleared cmos , removed battery , tried bios 1203, 1402 , 1501 and 0066. Also tested to different OS builds. Same issue. Low SA is fine for 24/7 settings with normal speeds..but not Geekbench runs 8800+. Something is definitely not right , and it’s so frustrating. Anyone ?

  • 4 weeks later...
Posted (edited)
8 minutes ago, Atom_Ant said:

Guys, how to get a 12th gen non K overclocker bios for Z790 Apex Encore?

Z790 APEX ENCORE 0506 modded for BCLK OC

0506bclk

Edited by Seby9123
  • Like 2
  • Thanks 1
Posted (edited)
On 10/25/2023 at 11:08 AM, 1Carillo1 said:

Help! So. Been testing som new 2x24GB G.skil kit with z790 Apex, and I have encountered a strange issue never experienced before..This is when running 8600 c40. The second I press Aida 64 read , Memtest or Kharu, the OS lock up completely. Only safe boot works at this point… This when running Auto SA , around 1.32V , and only way I can run one of these above mentioned applications is if I lower SA to 1.15V ?? Why ? Have cleared cmos , removed battery , tried bios 1203, 1402 , 1501 and 0066. Also tested to different OS builds. Same issue. Low SA is fine for 24/7 settings with normal speeds..but not Geekbench runs 8800+. Something is definitely not right , and it’s so frustrating. Anyone ?

I see some strange behavior with 24GB A-die modules compared to the 16GB modules. Try setting IVR Transmitter and Memory Controller voltage to Auto and manually set DRAM VDD and VDDQ all on the Advanced Memory Voltage page with SA on Auto. I do not understand why, but this behaves better for me when running my 48GB modules at 8600. I am using 1.650V for VDD and 1.590V for VDDQ at 8600.

The 16GB A-Die modules are easier to overclock and can run tighter timings, but do not work as well for me with the IVR and MC voltage set to Auto.

Edited by Mr. Fox
Posted
On 11/18/2023 at 11:44 AM, Seby9123 said:

Z790 APEX ENCORE 0506 modded for BCLK OC

0506bclk


Thx, bclk overclocking is working :). Would be big question is to mod me also the newer 0507 bios? It is because the first two bios for Encore was made by Shamino, while this newer made by Bianbao and I like his version better :)

Posted
On 11/25/2023 at 4:23 AM, Atom_Ant said:

Somehow this bios doesn't do the trick, will not bclk. Could you check pleasse?

try the link again, sorry (used the last avx-512 ucode instead of the bclk one)

Posted (edited)
On 11/26/2023 at 11:51 AM, Seby9123 said:

try the link again, sorry (used the last avx-512 ucode instead of the bclk one)

It is actually working as I downloaded again. Many thanxs!

 

Mr. Fox, I remember for you from Notebooks review forum! What a shame it has disappeared! 

 

 

Edited by Atom_Ant
  • Like 1
  • Thanks 1
Posted
On 11/27/2023 at 11:13 AM, Atom_Ant said:

It is actually working as I downloaded again. Many thanxs!

Mr. Fox, I remember for you from Notebooks review forum! What a shame it has disappeared! 

Hey bro. I hope all is well with you. Yes, it is a shame. You'll find me here, ExtremeHW and Notebooktalk.net. Most of the old NBR gange is there, even though some of us have and want nothing to do with modern turdbooks, LOL.

  • Like 2
  • 2 weeks later...
Posted (edited)

Hi

Trying to install Win7 (Ghost Spectre minimal version) on Apex Encore in compatibility mode, but keep running into missing media driver issue. Anyone has any idea how to solve this (See attached video). Or, would anyone have an available Win7 image compatible with Apex Encore? 

UPDATE*** I injected the Intel(R)_USB_3.0_eXtensible_Host_Controller_Driver_5.0.4.43_v2 in the W7 installation USB drive - as well as point to it when the installation requests the driver - but all in vain. What am I missing here?

Thanks
MarkDeMark

 

Edited by marcvezina
Posted (edited)
On 12/11/2023 at 8:49 PM, marcvezina said:

Hi

Trying to install Win7 (Ghost Spectre minimal version) on Apex Encore in compatibility mode, but keep running into missing media driver issue. Anyone has any idea how to solve this (See attached video). Or, would anyone have an available Win7 image compatible with Apex Encore? 

UPDATE*** I injected the Intel(R)_USB_3.0_eXtensible_Host_Controller_Driver_5.0.4.43_v2 in the W7 installation USB drive - as well as point to it when the installation requests the driver - but all in vain. What am I missing here?

Thanks
MarkDeMark

 

 

I ran into the same difficulties installing W7 on Z690 and finally gave up trying to do it from USB. I used a SATA ODD and W7 OEM DVD with a PS/2 mouse and keyboard and then installed drivers after setup was finished. I was never able to figure out what the problem was injecting the missing USB drivers. The W7 USB install media that I had used for Z490 and Z590 would not work. Sadly, I am not able to run W7 anymore because neither of my GPUs will function on W7 due to lack of driver support.

Edited by Mr. Fox

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...