Jump to content
HWBOT Community Forums

Recommended Posts

  • Replies 163
  • Created
  • Last Reply

Top Posters In This Topic

Posted
2 other guys told me they never used higher than 1.25 and chips already degraded WTF?

 

damn my 5600 C1 is dead too no more good chips here....i pass for IVY this time

 

It's really strange. With regular SB and C1 SBE, I had no degradation whatsoever (even with 5800+ 26K), but with C2 ... no idea. Mind = blown.

 

How's your chip doing, Viss? Can you still run the same frequencies?

Posted
Why would vtt be the cause, it might help but i do think vcore + Vantage cpu tests are the biggest problem.

 

it's vtt

i benched 1.35 /1.40 on some chips before all with def cpu freq, only testing ram, just one boot at +55XX 6/12 but 1.20vtt and 24XX ram(no vantage no wprime only boot), the day after cpu can't boot over 1.25 vtt(1.26 00 error on R4E debuger) checked cpu freq and fluck -200MHz.

Posted
It's really strange. With regular SB and C1 SBE, I had no degradation whatsoever (even with 5800+ 26K), but with C2 ... no idea. Mind = blown.

 

How's your chip doing, Viss? Can you still run the same frequencies?

 

same here, i have a SB here 58XX and never degraded, same for my C1 benched a lot of times at 1.40vtt and +1.65 vcore

Posted

Hm.

 

Why are we using upto 1.2VTT anyway on SB-E? I remember for regular SB, I never used that much VTT or VSA because it was highly unrecommended. What's different for SBE?

Posted

I run 2 sets of gskill ripjaws 2133 c7 @ 2400 9-11-9-27 and that requires 1.2v for stability.

 

When i use my corsair 16 GB 2133 9-11-10-27 i can run VTT and SA @ 1.1 V

 

It's strange if those voltages degrade cpu's, as far as I recall Intel whitepapers say up to 1.3 is safe

Posted
Hm.

 

Why are we using upto 1.2VTT anyway on SB-E? I remember for regular SB, I never used that much VTT or VSA because it was highly unrecommended. What's different for SBE?

 

higher it's only for 26XX memories no need higher than 1.20/1.25 for 24XX

Posted
Hm.

 

Why are we using upto 1.2VTT anyway on SB-E? I remember for regular SB, I never used that much VTT or VSA because it was highly unrecommended. What's different for SBE?

 

Intel states 1.4v on either VCCSA or VCCIO is max, which is heavily raised from the Sb limits.

Posted

Brother I have a same problem,

 

I tried several i7 3930k C2 and one of them happens to me,

 

At 5300 h2o boots and passes all tests, but after days SS try to see if Yanomami up more and can run at 5300,: (

 

Like everything in the bios but I can not go from 5000mhz: (. Never gone from 1.2 vtssa, I think it may be another problem and not the vout or vtt. By h2o 5300 than before and now can not run?

 

(That chip I have already sold)

 

Also say that other issues are just not alone with this,

 

A gradient of 4 chips: (

Posted (edited)

3960X C1 (?)

SR0GW

Costa Rica (again...)

3133B439

2V118196A085

 

Air:

 

51x 1.5V - hangs up in windows

51x 1.55V - hangs up on desktop

 

~50°C - hot bastard, last one was 5-8°C colder...

 

SingleStage:

 

54x max boot, 55x freeze, no reboot possible

5450 with 6 cores not ht max for old 3D benches, 6/12 not testet

 

not too bad, good for some tripplecard scores and testing the next ;)

preparing single stage...

Edited by SoF
Posted (edited)

3820 3201B200 *A1358 5250Mhz/1202 max cold died

3820 3201B200 *A0821 5205Mhz/1195 max cold

3820 3201B200 *A1356 5310Mhz/1316/163 max air...so far

Edited by dumo
Posted

3820 seem to be crappy chips - my first one did 5074...

 

that degrading issue is hard to investigate - only thing I could remark until now: single stage will still give you 20-30°C+ on the cores according to realtemp during vantage, while the "CPU Socket sensor" shows 5-10°C...

 

Same issue as like 10 years ago....the cores will heat up much more than the "general cpu temp" sensor. With 6 cores it is much more complicated. You think you have -40°C on your stager but in real the CPU get's much warmer...

Posted (edited)

My third 3820 seems promising.

 

This on air...It still has 12 more up multi to play with cold if I'm lucky

 

2273118.png

 

Edit: Actually I'm lucky with cold:)

 

2275517.png

Edited by dumo
Posted

I dont think they stand a chance. 2600K clocks higher easy on boards that cost half as much as socket 2011. Not faster clock for clock either. Ivy wil replace 2600K :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...