I.nfraR.ed Posted September 7, 2012 Posted September 7, 2012 Thanks. Next time the goal will be top-10 1M and 32M. Quote
subaruwrc Posted September 7, 2012 Posted September 7, 2012 i think i have the same type of ram but it cannot achieve such freq/tmings. how much vdimm ? nice result with a strong cpu anyway. Quote
I.nfraR.ed Posted September 7, 2012 Posted September 7, 2012 (edited) This particular set is almost good as Ripjaws-X 2133C8. It can run 32M 1300+ 9-11-8 with pretty tight subs. For example this is with 1.8V and a bit loose tertiaries: link and 1300 with 1.84V: link I'm able to run 1300 8-11-7/8-11-8 on higher vdimm, but not stable enough for 32M. I can't find the blue ripjaws, so I've tested 3-4 Tridents 2000, but this is the only kit able to clock that good, others were just average/poor. Edited September 7, 2012 by I.nfraR.ed Quote
TaPaKaH Posted September 7, 2012 Posted September 7, 2012 Try higher SA voltage, it usually makes higher Vdimm values stable if you're looking to get 1300 8-11-x stable. As for 2000C9 Tridents - they vary a lot both in terms of IC (can be PSC, BBSE or Hypers) and in terms of IC quality. 1190 8-10-7 isn't particularly a good result for BBSE version, decent samples should do 1250 8-10-7 given enough voltage. Quote
I.nfraR.ed Posted September 7, 2012 Posted September 7, 2012 Yes, it does 1250 8-10-7. 1200 7-10-7 is also ok, but I can't go lower than tWCL=8. I didn't bother to max out the memory for 1M, just wanted to get a good feel how the chip behaves. Mems are around 20Mhz behind Ripjaws-X on same timings, at least compared to the kits in XS 32M low challenge thread. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.