The Mutt Posted July 31, 2013 Author Posted July 31, 2013 Good luck too all in the last few hours. I have posted my best and after messing up my zombie there was no way I could go higher. I spent 20l of ln2 on monday trying but my Mpower gave me nothing but problems... Quote
zzolio Posted July 31, 2013 Posted July 31, 2013 i have problem with me 3d03 file it will not upload  can some one help me tjek the file? Quote
Calathea Posted July 31, 2013 Posted July 31, 2013 Good luck too all in the last few hours. I have posted my best and after messing up my zombie there was no way I could go higher. I spent 20l of ln2 on monday trying but my Mpower gave me nothing but problems... Â And I screwed up today and showed up too late for refill of LN2 lol! Will post my best 3d11 score now, it's still with orig bios with -60 cold bug... Quote
zzolio Posted July 31, 2013 Posted July 31, 2013 solved my problem  1500 done http://hwbot.org/submission/2408789_zzolio_3dmark03_geforce_gtx_560_ti_448_172792_marks?recalculate=true Quote
The Mutt Posted July 31, 2013 Author Posted July 31, 2013 Congratulation to the winner and runner up! Amazing scores and a great job by everyone who posted! Quote
Cische-Jungle Posted July 31, 2013 Posted July 31, 2013 this is the right link for vantage  http://youtu.be/NCOzXrFaD7w  Quote
T0lsty Posted July 31, 2013 Posted July 31, 2013 why nobody used thuban for wprime1024 ? zzolio, Cische- - why so high clocks in 03 and so low in vantage ? Quote
zzolio Posted July 31, 2013 Posted July 31, 2013 the card died before I could rebench vantage at high speeds  it was the first yesterday I got it to run 1500 Quote
The Mutt Posted July 31, 2013 Author Posted July 31, 2013 why nobody used thuban for wprime1024 ?zzolio, Cische- - why so high clocks in 03 and so low in vantage ? Â http://hwbot.org/submission/2408844 Quote
xxbassplayerxx Posted July 31, 2013 Posted July 31, 2013 why nobody used thuban for wprime1024 ? Â MSI board would have killed it. Quote
rbuass Posted July 31, 2013 Posted July 31, 2013 Congratz ... Epic serie B battle... and great Vivi's way to bench. High level on the finals   Just imho, next time, must join Americas, APAC and EMEA and at least 4 places to serie B. The guys earned. Quote
T0lsty Posted July 31, 2013 Posted July 31, 2013 my PE card cant go 1400 mhz .. but both ref cards can easy do 1400 .. was no time for playing with cards .. i burned 2 ref cards .. and i didnt use more than 1,45V .. ln on mosfets i use only today .. Quote
rbuass Posted July 31, 2013 Posted July 31, 2013 my PE card cant go 1400 mhz .. but both ref cards can easy do 1400 .. was no time for playing with cards .. i burned 2 ref cards .. and i didnt use more than 1,45V .. ln on mosfets i use only today .. Â That's an emergencial benching session at deadline... Congratz ... you nailed Quote
T0lsty Posted July 31, 2013 Posted July 31, 2013 thanks Ronaldo) Â zzolio - i dont play with card .. so i increased voltage and clocks .. cause mpower work very bad with sandy .. and every reset is full crap .. Quote
Calathea Posted July 31, 2013 Posted July 31, 2013 MSI board would have killed it. Â lol probably true Quote
The Mutt Posted July 31, 2013 Author Posted July 31, 2013 thanks Ronaldo)Â zzolio - i dont play with card .. so i increased voltage and clocks .. cause mpower work very bad with sandy .. and every reset is full crap .. Â Yeah, mpower was my biggest problem, I probably could have gone higher with less voltage but every reboot took about 10min beacause the board refused boot past code 60 or A3... And that sucked most of my ln2 and my energy. Quote
Crew Leeghoofd Posted July 31, 2013 Crew Posted July 31, 2013 Congratz to all the winners, kick ass in Taipei city !! Quote
Lucky_n00b Posted July 31, 2013 Posted July 31, 2013 My deepest respect for the winners on Class B, extremely fierce competition!! Quote
zzolio Posted August 1, 2013 Posted August 1, 2013 Yeah, mpower was my biggest problem, I probably could have gone higher with less voltage but every reboot took about 10min beacause the board refused boot past code 60 or A3... And that sucked most of my ln2 and my energy.  know what you mean  there is a small tweak that works  clr bios boot set everything up but stay multi 40 save and exit if it is on 60 wait it will restart itself go to bios change the multi to 45 if it boot straight in then you can run max speed otherwise go multi 50 and try again  I should always double boot with 2600K but then it worked fine Quote
rbuass Posted August 1, 2013 Posted August 1, 2013 know what you mean there is a small tweak that works  clr bios boot set everything up but stay multi 40 save and exit if it is on 60 wait it will restart itself go to bios change the multi to 45 if it boot straight in then you can run max speed otherwise go multi 50 and try again  I should always double boot with 2600K but then it worked fine  That's it... Everytime we got post 60... it will back itself... was just enter at the bios and light a lit bit the settings... re enter in the bios and will work... At least here also works... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.