der8auer Posted December 20, 2013 Share Posted December 20, 2013 Please use this thread if you need help and/or a new modification. Once a mod is confirmed we will move it to a seperate topic in the specific subforum (GPUs/MBs) Quote Link to comment Share on other sites More sharing options...
[GF]Duke Posted January 17, 2014 Share Posted January 17, 2014 Anything for a GTX 690? BTW very good idea to start this thread! Quote Link to comment Share on other sites More sharing options...
Crew Vivi Posted January 17, 2014 Crew Share Posted January 17, 2014 woooot coolest section! Quote Link to comment Share on other sites More sharing options...
Team.US Posted January 17, 2014 Share Posted January 17, 2014 what about an epower points section for if you find nice pcb power planes etc or if GPU controller or mem controller needs to modified for it to function Quote Link to comment Share on other sites More sharing options...
der8auer Posted January 17, 2014 Author Share Posted January 17, 2014 Good idea! I will add an epower/zombie subforum later. Quote Link to comment Share on other sites More sharing options...
Dr4gon Posted January 17, 2014 Share Posted January 17, 2014 (edited) Request: A vMod for the GTX 570 (Gainward Phantom), and does this mean overvolting with hardware modification (cause I overVOLTED/-clocked my GPU already by ~ 0.040 mV @ plus ~ 100 MHz and ~ 0.060 mV @ ~ plus 120 MHz, both memory @ ~ 2000 MHz ) ?? o_O So overvolted by Std. Gainward values, which are 1.013 mV @ 749 MHz core & 1951 MHz memory to (using Gainward tool Expertool 2 v. 8.9g, but will update to current version tool 9.0 soon): A: my normal OC gaming mode, for normal games: - - 1.050 mV @ 855 MHz core (1998 MHz memory) B: my UBER mode (like AMD ), for UBER BF3 game: 1.075 mV @ 877 MHz core (same as above here ^) Edit: added more information Edited January 17, 2014 by Dr4gon Quote Link to comment Share on other sites More sharing options...
Dr4gon Posted January 17, 2014 Share Posted January 17, 2014 Updated my post above ^ Quote Link to comment Share on other sites More sharing options...
noxon Posted January 29, 2014 Share Posted January 29, 2014 I was wondering if anyone have the droop mod for Abit IC7-Max3? Apparently i did all the other mods back then except droop. Thanks Quote Link to comment Share on other sites More sharing options...
riska Posted January 30, 2014 Share Posted January 30, 2014 I have the pic here my freind Quote Link to comment Share on other sites More sharing options...
noxon Posted January 30, 2014 Share Posted January 30, 2014 I have the pic here my freind Thanks Do you happen to have all of hipro5's mods? Quote Link to comment Share on other sites More sharing options...
riska Posted January 30, 2014 Share Posted January 30, 2014 Yes but i dont now where i have 20+ HDDs with pics and stuff on them ant cant remember wich one Quote Link to comment Share on other sites More sharing options...
George_o/c Posted January 31, 2014 Share Posted January 31, 2014 Thanks Do you happen to have all of hipro5's mods? It's in Greek but all the pics work plus you can understand a lil' bit with google translate Electrolytic capacitor for better 1:1 & 3:2 oc - http://www.thelab.gr/apo-to-ergastiri/ena-magiko-taksidi-sto-kosmo-tou-extreme-1793.html?garpg=2 Vagp - http://www.thelab.gr/apo-to-ergastiri/ena-magiko-taksidi-sto-kosmo-tou-extreme-1793.html?garpg=3 Vchip (vdd) - http://www.thelab.gr/apo-to-ergastiri/ena-magiko-taksidi-sto-kosmo-tou-extreme-1793.html?garpg=4 Vdimm - http://www.thelab.gr/apo-to-ergastiri/ena-magiko-taksidi-sto-kosmo-tou-extreme-1793.html?garpg=5 VTT (two ways of doing it) - http://www.thelab.gr/apo-to-ergastiri/ena-magiko-taksidi-sto-kosmo-tou-extreme-1793.html?garpg=6 Be careful with this one. Where to use heatsinks and fans, some stability mods in the back of the mobo and a couple more general stuff - http://www.thelab.gr/apo-to-ergastiri/ena-magiko-taksidi-sto-kosmo-tou-extreme-1793.html?garpg=7 Quote Link to comment Share on other sites More sharing options...
skulstation Posted February 2, 2014 Share Posted February 2, 2014 (edited) searching for mod's for the sapphire HD3870 X2 and the evga gtx 560 ti 448 classified Edited February 2, 2014 by skulstation Quote Link to comment Share on other sites More sharing options...
noxon Posted February 2, 2014 Share Posted February 2, 2014 Thanks George Quote Link to comment Share on other sites More sharing options...
der8auer Posted February 2, 2014 Author Share Posted February 2, 2014 searching for mod's for the sapphire HD3870 X2 and the evga gtx 560 ti 448 classified 3870X2 should have the Volterra 1165 or? Should be possible to use software like Awardfabrik Voltage Factory to change the voltage. Which Chill controller is on the 560 exactly? Quote Link to comment Share on other sites More sharing options...
skulstation Posted February 2, 2014 Share Posted February 2, 2014 (edited) The chil chip is a 8266 i thik,the pic is a bit blury.whil re chek on the card.need to unplug it from the rig idd the 3870 x2 have the vt1165, and the software works but i don't reach beter oc whit it edit: after unplugging the card and rechekking i have the name of the chip it is a chil 8266 q1u 380.1 01 u1013 thailand Edited February 2, 2014 by skulstation Quote Link to comment Share on other sites More sharing options...
riska Posted February 2, 2014 Share Posted February 2, 2014 The 3870x2 Card you have is a ref. Card so just find the 3870x2 vmod guide http://xtreview.com/addcomment-id-4179-view-radeon-hd-3870-x2-volt-mod.html Quote Link to comment Share on other sites More sharing options...
skulstation Posted February 2, 2014 Share Posted February 2, 2014 (edited) The 3870x2 Card you have is a ref. Card so just find the 3870x2 vmod guide http://xtreview.com/addcomment-id-4179-view-radeon-hd-3870-x2-volt-mod.html thx i gone try it Edited February 2, 2014 by skulstation Quote Link to comment Share on other sites More sharing options...
Guest cowgut Posted February 20, 2014 Share Posted February 20, 2014 any one play with a 750ti yet? http://www.newegg.com/Product/Product.aspx?Item=N82E16814487028 this one I choose just since it had a 6pin,do not have the card yet so I cant get any info but was just wondering if anyone gave it a go already Quote Link to comment Share on other sites More sharing options...
der8auer Posted February 20, 2014 Author Share Posted February 20, 2014 Havn't seen any vmods about 750Ti so far but it should be pretty easy with a normal FB-Mod. Quote Link to comment Share on other sites More sharing options...
Guest cowgut Posted February 20, 2014 Share Posted February 20, 2014 well then I will add any info or ask for some help in a day or two Thanks Quote Link to comment Share on other sites More sharing options...
Guest cowgut Posted March 10, 2014 Share Posted March 10, 2014 (edited) Sorry for x2 posting.... Bios mods for the 750ti can get up to 1.3v using KeplerBiosTweaker here is 1.25v and the max i'v read is 1.26ish in heaven bench Edited March 11, 2014 by cowgut Quote Link to comment Share on other sites More sharing options...
Masterchief79 Posted March 27, 2014 Share Posted March 27, 2014 Hey guys, wanna ask for help with my Gigabyte GTX680 SOC. vGPU-Controller: CHiL CHL8318 (http://www.irf.com/product-info/datasheets/data/pb-chl8318.pdf) vMem-Controller: Texas Instruments M430F5510 (full name MSP430F5510) (http://www.ti.com/lit/ds/symlink/msp430f5510.pdf) vGPU is most important. It's not a bad chip on that card (1,4GHz@1,212V at air through 3DM11), so I wanna see what's possible with voltage tweaking. Any idea on how to vMod that CHL8318 though? Quote Link to comment Share on other sites More sharing options...
der8auer Posted March 27, 2014 Author Share Posted March 27, 2014 The easiest way would be to use the eVc by elmor if available. Simply solder to pin 16 and 17. If not you have to do a "FB"-Mod. Can you measure the resistance from Pin 4 to GND for me? Quote Link to comment Share on other sites More sharing options...
Masterchief79 Posted March 28, 2014 Share Posted March 28, 2014 (edited) That eVc thing looks interesting, you know where I can get one of those Roman? I'm used to FB Mods so that wouldn't be the problem, it's rather that I'm not familiar with the pinout of this controller and Kepler cards in general. I have no idea if you can just solder happily on the IC and the card boosts still as it should etc. Gonna measure the resistance now and edit it any second. Pin 4 to GND = 7.2 Ohm Edited March 28, 2014 by Masterchief79 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.