General hardware discussion

this card has a dedicated wikipedia page: https://en.wikipedia.org/wiki/T-1000

3090? What's that.

Full name is the Zida Tomato.

AM2+ socket

Today I tried to run a Furmark test, i did it several times and i noticed i have half the performance than the other users with the same gpu, my battlestation has: -i7 10700kf -rtx 2060 12gb -32gb ram 2933mHz (locked bcs of the motherboard, they are 3200mHz) -asus mag b460 tomahawk idk my gpu is only 1 year old, bought it new, maybe its the psu?? i have a no-name psu with 550W or maybe the RAMs are dragging me down too, they are no-names too can someone help me what could be the problem?? or idk, recommend some solutions

Hey guys, I was wondering if there is any way to identify m-die and a-die memory for sure. Is there some sort of list or even a way to identify them before or even after purchase? TIA

While looking for a 12300 or 12100F and I came across this CPU - no sure what to think of it. What is the meaning of a CPU without any SRL# or origin/date engraving on the IHS (see attached). The fact it has AVX512 support makes interesting but... Thanks

Are there any Asrock insiders left in here ... still reading the forum ? I have a bios question , if someone could help.

Any idea how to force to work in games ? In windows Graphic preference I not have option to change only see iGPU Amd drivers see it as RX 6700 but on sticker model is X080 3dMark see it as Rx 6700 and can Use it

I asking because I can get myself used ones for 1/3 price of used Rx 6600xt. From photo their looks like Sapphire RX 6700 10Gb but missing video outputs. https://www.techpowerup.com/gpu-specs/sapphire-rx-6700.b10593 I have some experience with soldering, I only concern about what smd parts to gets and if I can Flash Bios on it ? Any one know list of needed smd parts caps/ resistors for HDMI and Dispaly ports ?

I have seen on some great scores from using a SS or even a Dice/LN2 pot on a video card BUT they don't use a riser cable when benching? I know if I use a x16 riser cable this would give me more flexibility/room over installing it straight to the MB. Is there a reason not to use one (lower score)? I'm looking to try a setup like this but use a riser cable -> https://hwbot.org/submission/5272727_nachtfalke_3dmark2001_se_geforce_gtx_560_ti_211697_marks Here is a link to a x16 riser cable that I'm looking to use. https://www.ebay.com/itm/175473701215?hash=item28db0c315f:g:MfMAAOSwDtRjYdzQ&amdata=enc%3AAQAIAAAAwBeiLKuDkdsG%2BExl5tcXF6AVxC2vA48DlhW0ISsorfz4WtU7…

on air 4.771 GHz @ 88'C!! yikes!

Up to 1GHz+ 486 with built in USB :)

Hi everybody Does anybody know the weight and max dimensions (calculated as a square) of the retail 9900k in that polygon package ?

Anyone had any experience with these or know if they're good? [Manta] DDR5 | 32GB (Dual) 8000MHz | XPrism RGB U-DIMM | Extreme OC Memory

[url=//hwbot.org/xtu/share/1878385]13th Gen Intel Core i9-13900K @ MHz - - - XTU marks on HWBOT[/url]

Hi there HWBot folks. I ran into a matter of serious pain of not getting my Asus R3E to boot for the first time. The problem is when I hit the power button. The cpu light is red (near 24pin power) but does move up to Dram and vga. After sometime the cpu reaches certain heat level and i press restart and the cpu light moves to dram and vga and vola it boots up normally. What i need to fix that the motherboard turns on itself normally. The cpu needs to heat up and then i have to press restart in order to make it to boot. Im not on slow boot or any LN2 I have tried 2 Powersupplies. Dozen on ddr3 ram combinations. a range of i7 and xeon processors. No…

KM400, not km266

pcie works x4x3. with both apex 15 and b660.I tried various gpu, nvidia and amd but the problem is not solved

Hey guys I have a new build with a 7600X, Gskill Trident 5 32GB DDR5 and the Asus X670E Extreme board and I cant get it to boot, just shows code 00 on the LED and the Oled shows 00 Memory I have tried everything including single RAM stick on multiple slots, reseating everything, BIOS flashback to latest bios, nothing helps, do you think its a memory problem, a cpu problem or a problem with this board?

How do I add my actual hardware (memory,cpu,) ?? I dont even show any memory Brand, timing, IC, nothing?

Just recently setup my dark board for SLI and found out the hard way it doesn’t support sli since Nvidia will not give Evga the key for it. Do I have any options to make it work on this board or am I stuck going back to a Z690 dark?

Works at the clocks 83/100MHz https://dmarton.tripod.com/perm2.html

Works at the clocks 83/100MHz. https://dmarton.tripod.com/perm2.html

Base clock is 1.8ghz, 2.4ghz is it's turbo clock