Jump to content

Result Discussions

Discuss submissions of other overclockers.

  1. An elephant is sniffing the motherboard =D

  2. That is actually impressive, borderline scary

    • 0 replies
    • 118 views
  3. hey can you point me the way of a guide on the basics of overclocking this CPU as i know the multiplier is locked on theses CPUs and I'm struggling to find any sources of how to overclock it that explains it well. thanks in advance

  4. VERY NICE ! Full Pot ?

  5. There's the magic 10...

  6. Good stuff old man. 👌

  7. Is this an AVX512 chip? If so, you might have a winner.

  8. http://www.3dmark.com/fs/32464777 link to 3d mark

  9. Micron 8Gbit Rev J tuned at 3600mhz. Haven't found max freq but voltage was at 1.45v could easily get to around 1.5-1.6v but no need. Thanks to the intel employee who also gifted me 2 kits of ddr5 and some storage for this

    • 0 replies
    • 109 views
  10. Micron 8Gbit Rev J tuned at 3600mhz. Haven't found max freq but voltage was at 1.45v could easily get to around 1.5-1.6v but no need. Thanks to the intel employee who also gifted me 2 kits of ddr5 and some storage for this

    • 0 replies
    • 107 views
  11. its supposed to be just the mem score not the overall score

  12. Haha nice one Matt

  13. E8600 and REX test weekend. Second test Rex 6.0 87MC (706er) + E8600 Q822A435 #2. This CPU is also pretty sensitive. After a freeze, it only starts at a temperature of -124°C (CBB). Windows only starts at a temperature of -130°C. You can then bench down to a temperature of -140°C to -145°C. CB is then at -150°C. I don't know why, but with this REX, with the same BIOS settings (strap; PL; FSB etc.), I have much worse SP32M times than with my Rex CC Edition. That's why the performance in this run is really bad. I also tested Max FSB SP32M straight away. The board just manages to get a stable value of 660MHz! WtF!!!!/ VID CPU: 1.213v CPU@Air 4.9gig@1.40v Thanks to Seasonic a…

  14. Excellent score! Love the Thinkpad.