Jump to content
HWBOT Community Forums

Aleslammer

Members
  • Posts

    355
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Aleslammer

  1. I've had one test run where Encoding & Heavy Multitasking were both over 18000 on a fresh OS install (about the 3rd or 4th). Had some BIOS problems and it will not reproduce at present. I'm guessing it wasn't tested for 939 platforms so could have a hiccup or two or our systems maybe a little tried after all the runs on them. After this is over would be interesting to know what was used to kick up the scores. Never have liked the bench that much, dislike advertisements although the newer one is better than the first.
  2. With no OpenCL support looks like 14726 is it. Tried 1, 2 & 3 cards as will as 2.43 & 2.44, same score for OpenCL. Best score was with a 7950 X2 for the same clocks on the CPU & RAM but based on 1 run could be nothing more than back ground noise.
  3. I agree BIAS personalty willing to spend the money for AID cpuz sucks.
  4. I'll agree just had 12 saves with cpuz 178 with a X3363 in a 775 board and not one validated I have a few word but mostly bunny poo! Sorry if I hijacked.
  5. Out standing score, probably going to have to wait awhile to see some of the backups.
  6. Would you please add this CPU. Intel Celeron 445 - HH80556KH036512 Thank You!
  7. Congratulations to the winners and all that participated, a lot of fun and a big thanks to HWBot staff for the effort. No real complaints, although no Opteron/Xeons hurt some.
  8. @Rauf You're statement in post #21 is rather broad, personally I do care so in the future please refrain from speaking for me.
  9. Just looked on UAT and a little confused, as it exists without R7 my HW points are primarily 3D as shown on UAT this has shifted to 2D although I will say scores I have a little pride in. The most confusing my best global is a crap HWB Prime score with a 5820K that I sub’d just to put a 5820K in my hardware library with no more effort than switching on a preset in BIOS for 4.0, so is 20 points in R7 like 2.0 in R6?
  10. I would of said thank you for a no just looking for clarification!
  11. I have two Asus boards that I was thinking of using, a P35 & P55 that have workstation in the name so can they be used for Team Cup?
  12. Thank you for the reply so its any netburst cpu available for the socket as related in the leaked information.
  13. SC3 Stage 2 & SC4 Stage 1, the only CPUs that fit most of the numbers given are in the Netburst (Pentium 4,90nm) category, don’t have any idea what the 160 is. Also this would only allow 1 cpu the Celeron D 350 for socket 478 and after a quick search of Ebay not real abundant. If this has been asked sorry but don’t recall see it.
  14. I've lost the recalculate button also and having problems with this sub http://hwbot.org/submission/3184923_ Thanks
  15. Hardware all over the place moving from the garage inside the house everything in boxes and will move the subs latter today or tomorrow. Thanks
  16. I bench in my garage which is generally a little warmer than outside although I do have a large enough fan to remedy that problem that I use in the warmer months. I use water no additives other than dish soap along with outside ambient, December average 12.2c (H) 2.8c (L)-July average 36.1c (H) 18.9c (L). I also ice my reservoir on occasion winter, spring, summer & fall takes about a max of 8c off my ambient depending on starting temp and generally only affects my CPU depending on what board I’m using. At About 10c have had both AMD & Intel sensors report negative idle temps in CPUz, VGA sensors are a little more accurate from my own experience. At present moving into the house and was going to try using an 8000 BTU (2345 Watt) portable AC unit to cool the room with direct air flow through my rads then across the board, if this kicks me up a league then so be it but from examples from posts I’ve read shouldn’t be that much different than my winter garage just more consistent through the seasons. I’ve made these above comments as I read a post in this thread or another that in a sense stated a bunch of old guys cheating well I’m an old guy do I cheat guess it up to you. From what I stated you can tell I have nothing against someone setting up on a table in the backyard and braving a -20c for the hardware/ global points and calling it ambient cooling in fact more power to you. From my own experience the better the quality of the sample being benched is generally more important in the ambient arena than 10c and binning is not going away. As for ambient competitions yes there has to be a leveler playing field once monies or prizes start to get thrown around and the fixed clock comps look more appealing.
  17. Have a Gigabyte Radeon X1300 (R516 DDR2 64 Bit) in the Radeon X1300 (R516 DDR 128 Bit) category as the category was mismatched at the time I sub’d it as I remember. One of the subs has been moved to the Radeon X1550 (R516 DDR2 64 Bit) category which has different default clocks. If you create an X1300 (R516 DDR2 64 bit) I’ll move my subs. Thanks
  18. I've tried three times to enter the comp no way to do it on the submission page as of yesterday maybe need to be indentured to someone to help figure it out for me. I did see a way presented in other posts but not used. Also had to update IE on my benching OS just to see the OC eSport pages so basically only your 24/7 setups can be used as you need to have all the latest addons to see your bunny coding.
  19. Ran an AII 250 this morning tried a few of the tweak suggestion from the other thread and posted without a hitch also ran the old RB V2 with same settings to compare, like the new one.
  20. Tried three times to night first one opened up IE at the Asus page at the bot, second asked me to login again but was on the submission page but I didn't ask it to supply SS information as a test so deleted it and the third worked like I thought.
×
×
  • Create New...