TaPaKaH

7.1 dryice? what's the batch?

1100 7-7-7 ? doesn't look like powerchips to me

what's the batch?

I reckon CPU-Z has never detected socket A cpus properly, so you I'll have to rely more on the info which the owner can physically read off the actual CPU rather than CPU-Z/CPUID cpu name string

amazing memory, Qimonda or Hynix ?

is this the 3031A241 I shipped to joe_cool last week ? I've heard from "someone" that his 3031A242 can do 6350 wprime at -135 and 6800 suicide at -145

is this a 3005F or a 3031A ?

...on a Clarkdale, wow!

if it's REALLY important and you ask Franck or Sam politely - you can validate even the pre1.55 dumps

knut will tell more, but I think it's just a very early Deneb ES, not a special TWKR cpu or something

if you want better 32M efficency you need to learn how to use more voltage on your mems

why can't we go solid white or solid black on this? or bling and 1337ness is the compulsory part of every new hwbot benchmark ?

I have its brother sitting right here, not tested under LN2 yet (looking to do it next month or so)

haha, like the idea about the cooling. Is contact good with cable ties only?

haha, like the idea about the cooling. Is contact good with cable ties only?

why can't we use MemSet or CPU-Tweaker for providing board/mem info instead of CPUz? Less windows (one instead of 2-3), less likely to crash (compared to CPUz), shows everything you want to know...

what's the batch?

what's the batch of this one?

what's the batch ?

if chipset is at ~room temps then this is by far the best X48 i have ever seen. How's the IMC on this board, Petri? Can it run stable (32M or MemTest) at 1000MHz mem (500 1:2) in dualchannel ?

guys, let it rest until the morning, the database server cannot update all at once

how much vgpu?

what's the batch?

i have tested ten 140/145 on two boards (M4A79 and M4A79T) if one one board CPU#1 goes, say, 10MHz higher than CPU#2, then you'll see identical situation on other board Regor/Sargas has somewhat weak IMC, which can't handle high memclocks well. Also HT link doesn't affect 2D performance at all, so it's better to be kept low (at x2 or x3) If you're on LN2 (DDR3 config) the only divider to use is 1:2 and go for raw clocks which would easily compensate for the 70-80k (<2%) difference difference between 1:2 and 3:8

HTT is very CPU dependant - I had chips that failed 320 air, and ones that did 380+ air, so absolute numbers don't really say anything