I.nfraR.ed

I can't. "Oops. You are not authorized to do this. If you think this is an error, please contact us and we'll check your permissions"

Yes, with disabled OCP max vGPU is 1.6V. But that's another story. I wonder why the old submission was deleted and then re-uploaded? Old comments there are now lost... Noone have ever seen such strong 4850, wonder what it would do on LN2, 1300+? That's all, we are curious and want more info. It doesn't matter you have moved to XOC league...

Memory frequency is not unbelievable, I've had Gainwards hit 1380-1400 with Samsung 0.8ns at 2.3-2.4V, but 1110 on the core is highly unbelievable. That's why I want to know more details. All 4850s I've tested were not able to hit 1GHz mark on low ambients (but not too low). Guess I would hit 1GHz with subzero air temps, but that's all about it. For higher frequencies you'd definitely need SS/DICE/LN2.

So you re-uploaded it, but I still can't believe this card managed 1100MHz on water. What was the vGPU?

Nice, you beat tiborrr! I had no LN2 and time, but my cpu should be able to run 3d @ 6.7-6.8GHz. That would have been interesting

Ruggero, I've tested it on water only. 2900+ 1M with vcore < 2V. Valid 3000+.

Great ram pot and you're powering the board with Evga Epower, nice!

Sam, no mods on the cpu.

Yes, just noticed it. Changed with a valid, but lower score .

Thanks I was not sure if cpuz is the highest ever, but I'm quite sure for the other benchmarks.

Why not if it is running on an MSI mobo. It's basically similar to soldering a gpu provided by AMD on a MSI videocard PCB, but in this case it is on a socket. In both cases the gpu is manufactured by AMD. Plsu if you open GPUZ your integrated vga will have the mobo vendor. Not to mention that if your card is a reference model it might be produced by e.g. Sapphire and MSI put only a sticker on it.

I was busy with other things Now wait another 3 weeks for wprimes

It's not a paintjob, it's a firebug

That's what Massman has to say about it:

We need a wrapper!

All your screenshots are invalid!

I ordered from these http://www.ebay.com/itm/400579000910?var=670143131642&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 some time ago, because most of the sellers were not shipping to Bulgaria. A little bit more expensive though. Still waiting for the package. PS: Don't buy these, 1% accuracy, 1 digit after the decimal sign.

Maybe that's the max his board can set without vmod?

I like the CPU-NB clock. Nice

Not for mortals, especially when expenses for the travel/hotel/etc are not covered, but definitely interesting to watch. Good luck everyone.

OMG, what was the temp?

Yes, you need > 136, then the PLL should be automatically switched. However, I had problems with dual channel in that case. Not sure what was the case with blck > 136, but when using the integrated pll, you'd want your SATA controller running in IDE mode.

Does it work in single channel mode? I had similar problem with my Crosshair IV Formula 2 years ago - it turned out to be the board and not the cpus. It has a coldbug and even I tried different insulations it was still not good past -150.

Wanted to run pi 32M as well, but the OS was very slow and could not find why.