l0ud_sil3nc3

Gogogo! Excellent silverware.

Thank you PJ, having a blast benching 32m on this board, though I still need to figure out how to get my BBSE working on this setup.

Nice DJ!

Good thing I just found a x58 2600K:) Still waiting to get clarification from Massman.

Fixed:) I think this is the only forum that does not auto re-size and I always forget this.

Troll much:D

Very awesome see pee you!

Wondering as well if the 2600K is allowed for B Class?

and I forgot this one lol

So picked up a retail Z87 OCF and ended up testing the same set of Ripjaw Z 2400 c8's that were voltage limited to 1.96v on Ivy. Initial Dram voltage and Eventual Dram voltage got me around this brick wall and have allowed me to use 2.1v now which has allowed me run this kit higher than before. The Conformal coating on my board is very uniform throughout and the only vaseline that was added was on to the ram slots, everything else is paper towel and some Frost King, such a breeze to insulate. This is a great idea that should be implemented on multiple components such as vga cards, and ram modules as well, for those of us that love to freeze the ram. Blue Paper towels are just for you Massman:)

nice start Jake

It seems they are, having a hard time sourcing a good one as well, maybe time to buy retail

I have been following this thread @ XS and I am glad to see the Stilt gets the much deserved attention for this awesome project. Very few give back to the community like this.

You got the actual temp of the dimm to -185c? I have never been able to do that with spreaders or without. Either way I think I am going to have to try one of these out:)

That would be a bad time on Samsung, -20c to -50c is more than enough. PSC/BBSE would be nice to see at cooler temps, or just to see what it would pull down to when the pot is full and they are running 2+ volts. The KPC Ney Pro with SF3D plates has been the coldest (-162c) I have ever seen on dimm temps, followed by the SF3D Triple Point and lastly the OG Dominance.

Of all ram to test, such a low bin. Oh well at least the pot works well.

So looks like more -2c benching in the semi's huh? or Use the green card:)

Very nice Gyrock-san, seems as though you might have found a good cpu, -133c cb is better than any retail I have tested.

pics:)

l0ud_sil3nc3 - 7:21:031 - 40x100 - 1300MHz - 6-10-6-26-88-1T - Asus M6E- 2x2GB G.Skill 2400 c8 Ripjaw Z -PSC-2.0v -125c / -60c cpu l0ud_sil3nc3 - 5:58:531 - 50x100 - 1300MHz - 6-10-6-26-78-1T - Asus M6E- 2x2GB G.Skill 2400 c8 Ripjaw Z -PSC-2.0v -125c / -60c cpu it is all in the tertiaries. . . l0ud_sil3nc3 - 5:57:282 - 50x100 - 1300MHz - 6-10-6-24-78-1T - Asus M6E- 2x2GB G.Skill 2400 c8 Ripjaw Z -PSC-2.0v -125c / -60c cpu http://hwbot.org/submission/2390562_ pics shortly looking for the cable.

Because AMD makes every generation of architecture slower on 32m to torture 2D benchers lol 22 minutes is a long time to wait for pi to finish.

Solid 01 run Sofos!

Epic pic of the crew, great work!

Impressive, great work Team AU!

Yup, looking like 6.3 Haswell will match my 6.7 Ivy run. Have another chip from a similar batch to test later. . .