l0ud_sil3nc3

Have no idea Leeg, I have all this nice BFR, CFR and MFR and no desire to run it lol. I was thinking Samsung, but the RipZ kit worked so well I was hard pressed to remove it especially with the -110c cbb coupled with the fact that all clocks were booted from the bios as my OS does not support ME installation.

Agreed it is total fail, except for this bench.

@ Calathea yup all on air, 1.88v I found out tWCL 7 is broken and slow, like many things on the MPower lol @ Hazzan thanks bro, there's a bit left in it I think as the mount was pretty bad upon tear down, will revisit.

7790 looks better by the minute lol

Thanks guys!

still waiting for hardware, first GTX 560 Ti 448 came borked:( Hopefully everything shows up in the next few days. Good luck Eeky!

Set tWCL to 6, and make sure to run the slots closest to the cpu.

No I just started to reply and then I . . . . actually started benching:D Maybe time to start doing some more of that:)

Troll much? Fan headers blowing up personal experience there bud? Seems as though you may be doing a bit to much back seat driving, and watching from the sidelines instead of actual overclocking. Usually when I defrost the session is done, so who cares about water when thawing, you just let it sit for a few hours and you are ready to go again, not even sure why this was mentioned. As for the de humidifier option, I have seen this in the bios but since I am actually overclocking I don't really bother with it, as it does not help max clocks, not even for bclk world records:p All of the retail boards I have had have solid readings for vdimm and vcore and others can verify so maybe check your dmm. As for the false advertising about digital vs analog, I can agree but when it runs better than most other vendor's digital PWM how can you argue? And tell me how any of these vendors have any interest in what is good for America or the American economy? Where do you think all of this money is going? Back in circulation in the US economy? Come on your smarter than that. As a corporation their best interest is in increasing profits, not what is best for the consumer and that is every company, not just Asrock so moot point imho. And to err on the side of caution, I would still insulate the motherboard on top of the conformal just to be safe, and really pouring cola or deionized water? How about just benching the board and posting some results good or bad? I am sure we (the users) will figure out if this is marketing at it's finest or an actual good idea. I know you have lots of hate for any vendor other than Gigabyte and that is ok with me, but I usually like to choose whoever has the fastest, easiest to bench boards (with proper bios support) regardless of brand so if everything is dialed on the Gigabyte like I keep hearing you will see me benching a Z87 OC X.

love it man, fastest 32M result ever on an MSI board! anyone that has benched this board knows the above was hard work.

How much vcore are you limited at Bull?

Thanks, it is a Costa batch.

Do you have a good mount? I would check that and make sure first as that can be a huge issue, but you should be aware that there is a delta between the IHS and the evap head, so expect a variance, though yours does sound a bit high. I would remount and then check temps again, my single stage was able to keep my 3960X cool at 5.4 through PCMark 7 with no issue, but Vantage would not run at those clocks.

Very awesome set for sure man, I have one dimm that is the same model, it can run 2666 8-12-8-28 tWCL 6 on air at 1.92v so on cold it should be pretty nice. So nice to see c6 tWCL6 working!

Painful experience isn't it, knowing your ram can run "x" settings and then fails so hard on the MSI lol. Are you on the GD65 or the MPower?

beast.

Wondering why my bandwidth is so low for the clocks?

Sounds like we may not have a choice, as MSI is not willing to share atm.

Just warming up guys;)

So no A Class for you? Man your going to make us work for it huh? I would like either of these bios to test, so anyone that can please post.

hardware sharing? http://hwbot.org/submission/2381177_liping777_superpi___32m_core_i5_3570k_5min_2sec_63ms/ is this not the same?

Did not try more than 1.9v on air, as that was enough to run 2600 8-11-7-22 with everything else tight. Only thing I have to say about BBSE binning is they probably all need to be tested under cold, which sucks because it is a lot of time and work.

Sam's BBSE under cold:) brix shat:p This kit is good for 2600 on air, but it seems that it does not like voltage, all the above was done with 1.9v as more would cause it to fail quicker. Also dimm temps needed to be at -85c to -100c as much more would cause it to fail. I am starting to think some dimms do not like the extreme cold, and once again, bad on air = good on cold, and good on air = bad on cold. This kit would not do 2600 c7 or c6 at any volts. I corrupted Windows more times in this session as setting anything => 2.0v was insta corrupt and reinstall. Still have the black PCB to test:D

dat BBSE! Excellent work:)