Xtreme Addict

I believe in you!

Very good that info is giving out so early, when flights are relatively chip. So from what I understand G.skill OC World Cup 1st place winner is going to HWBOT World Tour Final and there is no separate contest organized by HWBOT? Half serious, half joking, not sure what is better, 1vs1 or G.skill final and rules created by Hiwa who apparently hates overclockers killing us with IGPs Or maybe G.skill will get 30 min 1vs1 format? Good that something is happening, though vision of G.skill contest + HWBOT World Tour as second contest was more interesting, more chances to win, more busy days of having fun Though in case of no new hw launch, such move is fully understandable.

Strong!

Very nice!

Strong!

Strong one

Strong cpu!

That is a strong score!

strong

I agree with both - in such case store is to blame, not the user. Buying CPU from official shop with an invoice can't be treated as breaking NDA by buyer/user.

That cache

Breaking NDA is one of major reasons why vendors don't send HW to power users/XOC guys before the launch. So it affects us all.

Wanna add Z170 LN2 to the collection?

Strong score

MFR are 3333CL16 and they are not reserved by rivaldokfc, so in such case they are reserved for you

Hey This time to sell my 2x best i7 6700K from private binning! Cpus are a very good preparation for nextgen And some rare memories HyperX special bin for HOT FINAL 2014 and Computex 2015 HWBOT Gathering. 1. My best CPU from private binning i7 6700K, 6585 MHz for HWBOT PRIME, very strong on air and very strong with hard HT benchmarks like Cinebench. Binned IMC for 4280 MHz 12-12-12 SPI32M CW - SOLD shipped world wide with tracking. 2. 2nd best CPU, i7 6700K also 6585 MHz HWBOT PRIME. Binned IMC for 4280 MHz 12-12-12 SPI32M CW - 500 Euro shipped world wide with tracking. 3. HyperX 2666CL10 DDR3 Samsungs 2x4 GB (special samples, never retail, but come with fancy HyperX heatspreader), HOT Final 2014 edition can run 2933 9-12-12 tight 1T for benchmarks on air. 2 kits available, price per 1 kit - 2 kits are SOLD shipped world wide with tracking. 4. HyperX 3333C16 DDR4 Hynix MFR 4x4 GB Quad Channel kit, special samples, with Heatspreader, never retail. The strongest bin of MFR by HyperX created specially for HWBOT Gathering. Those mems are the strongest MFR I had in my life (slightly better than 3333C17 MFR HOT Final 2015 - price is pending.

Sure, no problem

Z170 boards have only 1st slot X16, others are X8 or X4, depends which slot and from mobo layout Sure, contact me @ PM

I have 2x cards. 1x CB (losing picture) at -57*C and nothing helps, second card can run fullpot

Sorry to hear that you have problems, but maybe it's not entirely the kit's fault but yours/your hw? CPUs and boards can degrade, with Mad in OC LAB we degraded 4133 12-12-12 CW M8I to be unable to post even 4000 CL12. Also regarding the second kit you borrowed from your friend which was a bit better, but not outstanding as far I understand from your message. In proper hands of Alex it did 4133 12-11-11 CW! So this should be a clue that maybe you are doing something wrong. No offence, I am just stating the fact. Alex@ro`s SuperPi - 32M score: 4min 58sec 140ms with a Core i7 6700K My advices: If you are using Asus - check out my ULTIMATE B DIE TWEAKING GUIDE. Please note that some B DIE need different VTT and SA/VCCIO even on the same CPU and board. Please try to tune them a bit, maybe higher, maybe lower. On My Galax kit perfect VTT seems to be around 0.8-0.825v. #justBDIEthings Some B DIE don't like big WAZA like 3 GB, try lower values, 2 GB, 1 GB, 500-800 MB and so on. Regarding Galax - please note that Mad is not a seller and shop is not not his department, nor he has any power/influence over procedures in retail/distribution channels. If the kit fails spec (bunnyextraction happens, maybe soldering degraded - bunnyextractionty ROHS standard), maybe they degraded on half dead platform, maybe package was too much mutilated during transport, it doesn't matter what is the cause, kit has warranty and you should proceed it with Galax store or contact (I would recommend Gary). Please also note there were some Chinese holidays + Mad is moving OC Lab to different location, so believe me, everyone is busy and no replying by Mad is most likely just caused of his busy schedule, not bad will or anything. I am sure you can sort it out with Galax.

5 GHz @ 1.28v (2cores) SPI32M @ air

Yes, all are strong or very strong on air For instance this 6535 MHz HWBOT is the strongest on air from all our CPUs we tested with Sam, sadly it doesn't scale as good on LN2 as we would wish

This photo is worth more than 1000 words I guess, but those are not all CPUs tested which we tested with TaPaKaH ^^ Pictures of HW: CPU binning: CPUs were binned on Asus Maximus VIII Extreme with 0018 BIOS with LoadLine calibration level 7. I can give advices for Maximus VIII Extreme how to clock cpus, set proper voltages to reach the desired clocks. IMC binning: All 6700K were tested for 4220 12-12-12-28 1T tight Copy Waza on Asus Maximus VIII Impact on air with SA & VCCIO 1.25v to 1.3v. I haven't tested more or less. CPUs will be cleaned before shipping from all the blue marker labels on IHS, just my system of keeping track which CPU clocks how far ^^ Please note: a) CPUs from positions: 2, 3, 4 clock from 6425-6475 MHz HWBOT PRIME, but I haven't kept exact tracking of those, normally those would be totally rejected from selling but their IMCs are golden clocking 4220 Copy Waza with 1.25-1.3v SA/VCCIO voltage. b) CPUs marked as "BOX" are boxed and come with BOX and there is a possibility of executing warranty on them by me c) CPU nr 1 (6535 HWBOT PRIME) has also golden IMC @ 4220 CL12 @ 1.25-1.3v SA/VCCIO List of CPUs: 1. i7 6700K @ 6535 MHz HWBOT PRIME on LN2 - SOLD 2. i7 6700K BOX @ 6.4+ HWBOT PRIME on LN2 - SOLD 3. i7 6700K BOX @ 6.4+ HWBOT PRIME on LN2 - 370 Euro 4. i7 6700K BOX @ 6.4+ HWBOT PRIME on LN2 - 370 Euro 5. i5 6600K BOX @ 6.5+ HWBOT PRIME, 6.43 R15 on LN2 - 300 Euro 6. i3 6100 BOX @ 6.3 GHz R15 on LN2 - 170 Euro 7. i3 6320 BOX @ 6.26 GHz HWBOT PRIME (voltage hungry) but IMC can run 4200 12-11-11 on LN2 - 160 Euro Boards: 8. MSI Z170 Xpower Gaming BOX, comes with I/O panel and other accessories (instruction, CD, sata cables and so on), board was used on LN2, pretty strong sample, I could run 4000 MHz 12-12-12 with proper BIOS and settings. Board is cleaned from isolation and ready for 24/7 action. Board has USB mod supplied by MSI (so USB ports won't stop working on LN2) - just easy shunt resistor mod, fully usable for 24/7. The only flaw is that 1st PCIE port is not working X16 but X4 - 100 Euro. Paypal is preferred but buyer covers fees or sends as gift. Buyer is responsible for the shipping cost & customs in his country, in EU it's around 17 - 25 Euro, outside EU - 30-40 Euro with insurance by Polish Post or DPD including a tracking number (without insurance - cheaper), for other outside EU - please ask for the details. Disclaimer: No returns accepted, I am selling privately and not business related. I also cannot provide warranty for the exact clocks cause XOC overclocking depends from too many different factors, but gladly I will help with settings if someone has some issues in reaching the clocks. If cpu dies during OCing, I can assist in getting brand new (unbinned) RMA replacement, but buyer covers shipping fees in both direction (to Poland and back). Also because CPUs were overclocked on LN2 and delidded I can't 100% guarantee that RMA will be successful.

40k barrier, nice

I am in