Jump to content
HWBOT Community Forums

Max-Hardware_Numb3rs

Members
  • Posts

    159
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Max-Hardware_Numb3rs

  1. I start to like the new tool, submissions are super easy now, a pity that Spi with Win10 sucks a bit, especially with Zen, and the latest Win 1903 is weak with tight memory timings
  2. I can replicate the result easily, and do more testing, I'm with the cascade, let me know if you want me to try something.
  3. I have an issue that it cannot detect GB3 and GB4, I tried restarting, multiple runs, nothing... pity, I could have been 1st in the Intel DDR4
  4. Win 8/10 is like 1 minute slower, absolutely non sense to use with spi
  5. I tried literally everything, various waza size and types of files, cache settings, Windows tweaks, nothing to reach that level, close but they have discovered a good tweak that we can’t figure it out, one of my main goal is still to be the first sub 6 min on AMD, let’s see if I can with the 3800X
  6. I didn't find any particular issue with cold, in fact I usually pretest the memories on air to the limit, knowing that at full pot I can push a bit more on max memory frequency, my boot settings are 4GHz CPU - 3600 C11.10 (2,04V RAM - 1,265V SOC) and then I raise the clock in Windows, usually from 1800 (x2) to 1860/1870. This is the freq/timings that gave me the best efficiency at 5,5GH and above. Another important trick is to check the performance at every boot, because the motherboard train again the memories, and it brings changes to timings not visible to us, at 4GHz I should have around 109 with the smallest run, if higher (sometimes even 169) you must reboot and try again.
  7. Zen 2 doesn't really shine in Spi32M, mostly for the maximum frequency not far from Zen+ and the CB related to the fabric that doesn't allow to push high memory frequency in 1:1, there's a big compromise to be taken, higher clock (with lower temps) and low fabric clock Vs higher fabric clock and lower CPU clocks, I'm still trying to find the best settings, but with a lucky 3800X or 3900X probably there's a chance to beat Zen+. For your Zen+ run, I can suggest you to try C11.10 with memory at 3600/3700 (if your IMC can do it), the benefit of this combo will give you more efficiency at higher CPU clocks
  8. K-Probe here PM me if still available please!
  9. High Frequency on Ryzen 3000 is not great for the FCLK, but that kit (and at that price) is great to run like 3733 1:1 C14 or C16, the actual sweet spot for Ryzen for daily. If you are looking for a kit to run in a daily setup and eventually do some benchmarks (not extreme with LN2) don't think twice ?
  10. A1 and A2 are working great on Ryzen 2, I have some submissions with the 3600X and A1s, they perform quite well like in the Intels (but for Zen2 the fclk must be considered as well)
  11. Ok, in case you end up not selling the Trident will you let me know please? Thanks!
  12. Hi! is the Trident Z Royale already sold? I'm interested
  13. Check this: https://hwbot.org/submission/4194748_ At 2993 1:1 I have CB at -142°C, no CBB, I can boot as well at almost -160 with the motherboard at default, so something strange is going on. From today’s session I saw that timings as well cripple the fabric stability and CB. I don’t know if this bios there’s a way to go with low timings without risking CB or CBB. plus Turbo V doesn’t work, so I have to do all via bios and the frequency with the new software. I think I wait for the CH8 and better bioses, like this is pretty much a waste of LN2
  14. Let's put it this way, Zen2 is a pain with CB and CBB itself, and on top with X370/X470 you have bad bioses who struggle to train memories/fabric as it should (remember to set vmem boot voltage manually) If you want to be efficient with LN2, prepare on air various profiles starting with low fabric clock, higher the fabric clock, higher the risk of CB/CBB. I'm trying now with a fast pot, since you have to control temp a lot, and torch a lot, at least to figure out the settings, but this is as well with X570, check the video on youtube of Steponz (bearded hardware), lots of useful info, he uses a MSI MEG, I have tried with CH6 and CH7, is worse. In 6/7 hours I'll give you more info when I try a second run.
  15. Great, my screenshot got corrupted, but it was nothing special, 5.2GHz 2933 ram 1:1 C12.11 the score was like 6m50s or something like that at -125C I'm with a CH7 with a bios that is horrendous and the CB on the fabric is nasty, now time to go to bed, tomorrow I'll try with more time. It's going to be challenging, and I like it
  16. I'm benching SPi32M in this exact moment, with a 3600X on LN2 Win7 (that actually push almost like Xp on intel) Xp on Zen2, maybe, if I have time Zen2 and the fabric speed is a big obstacle for Spi, need to figure out a good balance
  17. Hey! I'll take the Formula V Probably in a couple of month I'll be around there, if you still have the Dewar I can think about it, my 30L feels too small lately :D
  18. Could you check please the diameter of the Venom ? if 70mm I'll take it
  19. The Ryba is too big for Socket A, the Fusion in the last revision (3.1) have 70mm diameter, if this one have the same dimensions I will buy it straight away
×
×
  • Create New...