FireKillerGR

thanks ^^

thanks!

sick - will put it on the main post! ty @noizemaker!

it shoots an issue after driver installation (and restart) if u dont have digital signature off. Still needs to be tested but what might work is to disable secure boot in bios so you can disable dig signature in OS. Might find to try this out tonight.

Did you try the AHCI drivers from the main post? Think it might work fine. If not I will look into this later this week. As for USB 3.0 on Z490 I need to spend time to see if I can find an alternative as I didnt bother for the last couple of weeks.

pump

https://drive.google.com/file/d/1x76hsO6FgNrBR8DZKEN-r8QhY5a3UF25/view?usp=sharing same as old image. For usb (for the time being) u can install the ones from the original post but you got to hit F8 during boot and enter without digital signature else USBs wont work. Why is the 0020 needed? Nothing unique about it iirc

Totally forgot about this when requested to close the previous thread EK-SF3D CPU Pot in great condition. Price is 100€ + shipping.

Thanks to AKM for the quick transaction. Can be closed.

10900K added

thanks guys!

added 0069 bios. Mini improvements and fixes overall

For sale a 10900K I got that does 6850 MHz R15 with about 1.72v after a quick test. Seems to be a cold chip overall and scales nicely with volts. Price: 800 € + shipping Will post photo of the cpu later today --------------------------------------------------------------- Got this from a friend and was meant to post the sale yesterday thus the date. Great condition and price is 100€ + shipping.

disabling mid HT cores seems to be the best combo so far but will test in more detail soon. Thanks @AKM!

most of the time vaseline on the fuses makes them go yolo which triggers usb ocp. Common case which requires either bios that has ocp disabled or soldering the fuses to bypass them (shorting them)

you managed to get usb overcurrent already?

doubt it

added 0062 ucode and no ucode for Apex on the first post

nice!

Pm :3

New 0055 bios allows 2+v vdimm without ln2 mode + noucode version: https://www.dropbox.com/s/7pc91xn7ksxkucc/ROG-MAXIMUS-XII-APEX-ASUS-0055.zip?dl=0 VRM tool - run exe on boot/windows startup. New tool that might help push a bit more on the cpu side / run same freq with a bit less volts (15~mv less): https://www.dropbox.com/s/hkoydak1vm0zgpb/vrm2.zip?dl=0

yy its totally ok update to the 4 cpus I posted about above. 1x 90 SP doing 5.3 GHz R15 with 1.288v Load on water = 6750 R15 1x 83 SP doing 5.3 GHz R15 with 1.296v load on water = 6700-6750 R15 both scaled to 1.7~ v on load but didn't bother much 1x 77 SP and one 63 SP failed 5.3 with 1.35v and didn't test on ln2. 63 SP one had the worst IMC by far as well.

nah - didn't bench it

Also got X015E217. Will test for oc tomorrow

Foul ?