Jump to content
HWBOT Community Forums

pepinorang

Members
  • Posts

    251
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by pepinorang

  1. The right CPU in the right hands! Congratz for the long due 1st place without "special tweak" involved!
  2. Nice result and thanks for the feedback man! RTL/IOL is dependant of IMC, same for required SA. You can check page 25, I posted XTU @2047 12 12 12 tight, RTL 50/52 with not more than 1.35v SA on a "random" 6.5G Caseking CPU.
  3. If you could find that post, shouldn't be hard to find BIOS, maybe just read previous pages? Same for @Fact11
  4. There will be more Ambient comps in the future but not sure if any 3D and for sure no more XOC.
  5. As some of you already know, I'm no longer in charge of OC community and support for MSI as my job position changed. For any OC requests please contact @MTC. BTW, this is the last XOC competition (online or offline) from me and overall from MSI as well. Envoyé de mon ASUS_Z010D en utilisant Tapatalk
  6. BTW, since there is no ACPI BIOS, you will notice that performance in 32M vary a lot from run to run (up to 4s). Unless you find your own solution, my advice is to re-run again and again, according to BenchBros 2/10 runs are OK: BenchBros`s SuperPi - 32M score: 4min 31sec 562ms with a Core i7 6700K (NO ACPI RUN) [highlight]HAVE FUN![/highlight]
  7. @MTC ? - No ACPI BIOS and there won't be. - Use ASUS Guide and press F5 to select MPS Multiprocessor at same time you have to press F6 to load FiraDisk Driver, this will install non-ACPI XP. - VRM is not suitable for XOC but it is 100% enough for the current comp. - Z170I GAMING PRO AC is an entry level GAMING motherboard and therefore it is much less convenient to OC than XPOWER as it don't have any buttons, debug led or clockgen (need to Clear CMOS/Discharge MB after each memory training fail to reset Intel ME otherwise BCLK stay locked), however it can run memory at higher frequencies and tighter timings. - Command Center Lite 2.0.0.11 to 2.0.013 (latest) can be used, no need for special one. Latest BETA BIOS: https://www.dropbox.com/s/h28ewvqmbyox2cj/E7980IMS.181?dl=0 (I recommend to use this one unless you need more SA) Old XOC BIOS (Computex 2016): https://www.dropbox.com/s/dc9pmdwxr81koo1/E7980O17.T72?dl=0 (Only difference is max SA air ~1.33v / max SA Ln2 ~1.35v, I wouldn't use it unless you need more than 1.25v SA which shouldn't be the case for benching. WARNING: Post at 12 11 11 takes FOREVER! 12 12 12 is OK) Hardmod guide for SA: https://www.dropbox.com/s/0fjr7oy1xyydyz3/Z170I_gaming_pro_AC.docx?dl=0 (Need to use XOC BIOS, up to 1.8V after vmod)
  8. Tapakah is using Z170I GAMING PRO AC (ITX), but I have posted 2000-2047 12 12 12 28 220 1T tight results on Z170A XPOWER GAMING TE.
  9. The old and new official way -> Get in touch with local office. Also @Massman, could you please upload first page? I have received more or less 50 mp for ABX since the Guru3D issue. Thanks!
  10. Yes I can do 2100 12-11-11 32M + Wazaa with my ES sticks. I'm trying to get them to unlock SA above 1.35v for max frequency and implement ACPI on this one too...
  11. On the left is Wizerty's own front panel/multi-meter. On the right is an MSI internal tool to flash BIOS with debug LED. It's more convenient since the board doesn't have its own Power/Reset buttons and debug LED.
  12. LOL, Toppc can't read English properly and he doesn't even know what's a HWBOT league! I'll solve this with him tomorrow, thanks for the heads up.
  13. Congratulations Toppc 大大! Now send over the new BIOS
  14. First page has been updated with new XOC BIOS + new flashing tool (as usual XOC BIOS can't be flashed with M-FLASH). :celebration: Change log: - Fix PCI-E lock to 1.1 - Fix B-DIE need to boot 3866x99~99.8 - Fix E-DIE need to boot 4000x99~99.8 - Replace old Micron/Hynix memory presets with new ones for AFR/MFR/D-DIE/E-DIE/B-DIE (I'll add Hynix M-DIE and update B-DIE asap, it only set primaries and tFAW for the moment) - Add Non-K OC support - Add ACPI support (need to be tested, not sure it works properly on this one) - Increase SA/IO voltages in OC profiles - Rename LN2 LOW OC profile to LN2 -120 - Add "LN2 FULL POT" OC profile [highlight]***This BIOS must be used with Command Center Lite HOT version***[/highlight] New memory presets: Non-K OC + ACPI: New OC Profiles: HAVE FUN GUYS!
  15. Even if you have probably noticed, I must warn that I needed -80 on IMC for +2040 (memory weren't cold though). The CPU I used isn't binned in any way so maybe a better IMC could also do on air. However for XTU @2000 12-12-12-28-220-1T tight, ALL AIR is fine: I'll try 32M asap, but for now I can't get this new BIOS to work with XP (ACPI or not). At least it pass without wazza in 7 x64 It is not the issue, I had XP running without ACPI before. This BIOS is supposed to be ACPI compatible (I saw it working on another version before) but neither my old install without ACPI or a new install with ACPI are working... Weird but I have no time to check this further at the moment it'll have to wait a bit.
  16. Yeah I told you, I don't have any other anymore! Also the DDR4-4094 C12 B-Die XTU above with BETA 173 was done on the board I picked up from you
  17. New XOC BIOS (based on BETA 173) is here guys! :celebration: I'm testing it right now and will post it later on!
  18. Hynix M-Die. Not sure they can compete with B-Die though, we will see.
  19. Actually it is already there, but it seems I cannot get it working: OC MENU > BETA RUNNER > REAL THREAD Maybe you could try with an XP drive that is already ACPI?
  20. First page updated with latest Softwares and BIOS. New XOC BIOS takes a lot more time than I expected as R&D is busy with next gen, but it will be ready around mid-may at very least. As I mentioned before, new XOC BIOS will be ACPI compatible, include 15 new memory presets for D-Die/E-Die/B-Die/MFR/AFR and fix ALL the bugs of HOT v2. In short, it' will be one to rule them all and I doubt another one will be needed until Kabylake or new competitive memory ICs are released. For Non-K OC, you can now use OFFICIAL/BETA BIOS, when Non-K CPU will be installed, BIOS will automatically switch to microcode and display an hidden menu named "Beta Runner". In this menu you have to enable the "NOC" option and your Non-K CPU will fly! BIOS screenshot, courtesy of Der8auer's MSI Z170 Non-K OC Guide:
  21. None of the Official BIOS will lock your Non-K CPU, don't worry. When there is a Non-K CPU installed, BIOS will display an hidden option named "Beta Runner" in which you need to enable the option "NOC". If this does not happen it means the BIOS is not new enough and doesn't have the feature implemented. BIOS picture, courtesy of Der8auer's MSI Z170 Non-K OC Guide: http://overclocking.guide/updated-msi-z170-non-k-overclocking-guide-new-bios/
×
×
  • Create New...