phobosq

Clear. I am surprised to see myself on 7th out of 43 even though I missed 3D stages.

IQYHA0408 FTW

Grrrrrr I'm unable to run PCMark04... even on stock settings crashes to desktop after test 6 and that's it for my domination in this round.

Please allow 7850 for stages 4 and 5, after all it's below R9 290

1 kit of Crucial2 #5 reserved.

Works for me, thanks.

Thanks a lot!

Please allow 7850 for stage 4

Price drop: 40 euro 25 euro 30 euro 25 euro 30 euro per kit 30 euro

Mine!

YGPM

It seems that's a black weekend for DFI boards, I tested my two boards yesterday (LP and Infinity) and both seem to be dead, no boot. They have been lying in the closet for a year and boom, surprise.

Thanks, I already made 6100, but the CPU's getting too hot, BIOS reads between -3 and 0 with 6100 frequency and 1.75 vcore need to check evap's contact and thermal paste. I have second CPU to test, the other one is not that hot and survived voltages up to 1.875V on air (reads 85-90 idle with 1.85V temps compared to 85 with 1.7V on this one)

Bump - no one interested in a decent D9GMHs?

Dear Friends, I gathered too many Micron D9GMH/D9GKX at home and I need to part with them: I tested them on GB EP45-UD3R and I aimed for 1M stable as I was targeting max clock. I booted either 640 555 @2.4 or 680 666 @2.5, entered Windows and worked my way up with SetFSB 5 MHz at a time running Pi1M after each change. Failed binning - the mems didn't boot at those settings or failed 1M. The exception is for Transcends as I used them for benching and they do 615 32M stable. All the sticks are used, so some of them might have usual marks or scratches The contents of the box are: a kit of Team 1300C6 - working, both sticks fail binning, they can do 650 5-5-5-15 @ 2.4 a kit of Team 1300C6 - one stick does 750 6-6-6@2.6, second one is the one I did 811 MHz, but needs reballing due to my lousy attempt of removing the HS a kit of Team 800C3 - one stick fails binning, does specs, second one did 720 5-5-5 @ 2.4 but didn't like CL6 a kit of Transcend 1066 - one of my benching kits, 615 5-5-5 @ 2.2 stable, I didn'tpush them further two kits of Crucial 667C3 (16FD4) - all of them do around 700 5-5-5 @ 2.4, they don't like CL6, 650+ dual channel capable a kit of Crucial Lanfest 800 - both capable of 680 5-5-5 @ 2.4, also 650+ dual channel capable Asking prices (without shipping costs): 40 euro 25 euro 30 euro 25 euro 30 euro per kit 30 euro I am also asking 200 euro if you want whole box. All items are fully working unless said otherwise and are sold as seen on pictures. I provide no warranty and I accept no returns because I am private seller. As it comes to OC, your mileage might vary, as it depends on large number of factors, including luck. I am from Poland, so I prefer an EU trade to avoid issues with shipping and customs - shipping costs will be between 5 and 15 euro depending on item size and destination (to be agreed with buyer). Payment via PayPal only. In case of questions, please PM me

@Massman: I asked in a different thread, but I didn't see the answer - can I use HD 5850 in this stage? It's definitely slower than 750 Ti.

Sick volts, dude!

Good result, once you get your windows straight it will be hard to beat that result.

It was actually the one shipped dead, too bad it didn't want to work. @ObscureParadox: that's a cool idea

Thank you HWBOT and Futuremark, it's very nice of you.

Did some quick test of my A-Datas with EK memory adapter for Div 2: http://hwbot.org/submission/2890663 Terrible picture quality, but you can see that the adapter works fine. RAM settings change from 2600 8-12-8 to 2726 7-12-7 while keeping CPU frequency at 4500 gave boost from 1107 to 1136. Although I could not tighten TRCD to 11, maybe I would have to go colder. It's second kit I'm testing on cold and both don't work 100% well - the other could do the same frequency but was unable to go tighter than 8-11-8 and didn't accept voltage over 2.05V.

Anyway, it's very good result, my 4690k requires 1.6 to work with 5400.

Great CPU, 5400 on air with 1.45... what can it do on cold?

No, it's just hard to find them these days. I bought three last year, one was shipped dead, second died on me. They are like... consumable

@Strunkenbold: I have DFI LP that does 264 dual with 1.8 vnb straight from BIOS, no binning done, it's my second board. IMHO 270+ FSB dual will be excellent.