Jump to content
HWBOT Community Forums

phobosq

Members
 View Profile  See their activity

  • Posts

    604

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by phobosq

  1. phobosq
    Go to their website, all the prices are there.
  2. phobosq
    Try lowering cache, mine does 50/47 with 1.36 but doesn't want to go higher with cache. 5100 with 1.42
  3. phobosq
    Great idea, I want one
  4. phobosq
    Looks very good, I had 1138 with 4690k@4500 and cold PSC at 2666C7.
  5. phobosq
    Good job, a lot of interesting information, multiple tests, it will definitely make tweaking DDR4 a lot easier. For me, a thread of the year! Thanks Alex!
  6. phobosq
    OMG what did you do to those poor cpus?
  7. phobosq
    my bad I look at the wrong 3d Mark
  8. phobosq
    What about 3d Mark version? It says in requirements "â–»3DMark11 version must be 1.0.132" - I can't find it anywhere, definitely it's not the newest one.
  9. phobosq
    I'm an idiot after setting PLL termination voltage to auto it is 5000/4500@1.36 - everything except XTU stable (Cinebenches, Geekbench, HWBot Prime, GPUPI, wprime 1024) Air cooled, mobo is Z170 OCF, 1.43V BIOS. Too scared to delid.
  10. phobosq
    You'll be equally impressive, if you post 750 right away
  11. phobosq
    I left initial RTL on auto, but played with IO Latency offsets. Thanks for the info, I'll check it and repost.
  12. phobosq
    I think no one runs it on i3 6300 anyway, if I failed mem training with 55 on 3600C12@1.65V, does it make sense to push more volts? How far do MFRs usually scale? I have VCCSA and VCCIO on 1.25, so IMC should not be an issue here.
  13. phobosq
    Thanks for the tip, I'll post more details later when I'm back from work, board will dry by then and no more 00 code So far very happy with mems on ln2, went straight from 3200c13 to 3466c12, 3600 was no go, but I didn't have enough time to play with it and I gave up after 3 fails; it might go with more vdimm as it failed training with 55. Edit - I have one screenshot with Geekbench, no thirds captured, but all auto apart from TWRRD_sg = 20 and TWRRD_dg = 16. RTL/IOL 48/50/4/5
  14. phobosq
    I've just put RAM pot on my Kingston MFR so far 3466c12 @1.55, but I noticed my efficiency is not up to par, I get similar or worse results in XTU than with 3200c13 on air. I already managed to tame RTL/IOL, on auto had them 48/57/6/14, now 48/50/4/5. I think it's in thirds, but not really sure... is it possible that I overtightened trdwr_* and twrwr_*? Bad luck aerotracks hope you can fix it somehow
  15. phobosq
    Nice result, mems 4x4 or 2x8?
  16. phobosq
    Just got 6600K L536B309 from caseking. Will try it in the evening on air. EDIT: VID 1.04 4500/4200 1.17V on air all stable, including XTU. I was unable to complete XTU with higher clocks. I booted 5000 with 1.3V, with 1.32V entered win 7 but kept getting freezes all the time, I need to check voltages, maybe I'm doing something terribly wrong.
  17. phobosq
    CPU-Z 1.73 does not detect memory clocks/timings for me in the end I have a valid with no memory timings. 1.74 works OK. Is it BIOS? I'm on Z170 OCF with 1.43V.
  18. phobosq
    Great score, great mems CPU can't go over 103 BCLK?
  19. phobosq
    6666 MHz and you break 3 secs
  20. phobosq
    OMG dude, you're one lucky guy, mine is fed up seeing all the hardware on my desk. She even threatened to break up, when I suggested her to help me pouring LN2 last time Back to main topic - I used once a clamp from socket A cooler upside down (hooks away from the card) and attached to VGA with zip ties.
  21. phobosq
    Dumb question - did you try to flash VGA BIOS with modified clocks? I remember it helped me back in a day with ocing GF2 MX.
  22. phobosq
    I can boot with 102, but have a wall on 103 BCLK, 102.9375 benches just fine with XTU. Is it CPU limitation or BIOS doesn't want me to go higher?
  23. phobosq
    Can I try Pentium/i3 for max clock?
  24. phobosq
    Please change my nick in the forums to phobosq.
  25. phobosq
    I also understood it like that.
×
×
  • Create New...