websmile

The superposition stage will get deleted and I will add a UH Extreme stage instead. For this stage I prolong the contest to 20th of january

If you use an external hoster you can enter the pictures as thumbnails which lead to the big versions in a new tab example

Please note that push is allowed every 24 hours (marketplace rules) thanks

All downloads work for me, they lead to website of piblisher or direct download at 3dm03, but I need to use the normal left click and cannot download with right click. Same as on hwbot directly, also the 03 being shown as shortened url problem is same. All works nontheless

I do not understand the question about the download - if I click the ocesports download link at cheapazz it leads to unigine site directly for download link, so there is no difference for me. Does it lead you somewhere else?

The benchmark was tested with a couple of different GPUs, but you can´t test new benchmarks on all different cards available. For this competition, hwbot did not determine the benchmarks used but the community did at a special preparations thread so you are asking the wrong person for "if this was chucked in"^^. The benchmarks we use normally are tested and bugs are known unless we make special stuff like the realbench beta comps in the past to evaluate new options

I might exchange stage 3 if we cannot find a solution that either shows these runs are tweaked or bugged. It is always risky to use newer not much tested benchmark on rarely used hardware. This decision will be made saturday/sunday most likely because everyone will feel bad if we have to rely on chance.

We might have a problem, maybe you can give me an explanation for results like these http://hwbot.org/submission/3672434_sergeyr_gpupi_for_cpu___1b_2x_xeon_x5690_46sec_718ms/ in comparison with this http://hwbot.org/submission/3410802_sparkey247_gpupi_for_cpu___1b_core_i7_extreme_980x_4min_29sec_662ms and this http://hwbot.org/submission/3668752_splave_gpupi_for_cpu___1b_core_i9_7920x_1min_26sec_607ms/ and especially these http://hwbot.org/submission/2860344_skulstation_gpupi_for_cpu___1b_xeon_x5690_4min_47sec_284ms http://hwbot.org/submission/3626243_skulstation_gpupi_for_cpu___1b_2x_xeon_e5645_59sec_189ms I think there definitely is a more than weird scaling and results of multi cpu xeons are real dodgy

The only changes made at GA were that I removed more results, and mainly because the raymarch bug was happening more often than usual. On the "bugged" runs, so how to see these? minimum and maximum fps are completely in line for the results. We cannot block results because of efficiency being too good if we do not have more hints. This is a quite new benchmark and it has not been run on lower end gpus much. What is even more hilarious, the community discussed the benchmark choice and hardware for months and obviously no one did in depth testing.

To answer some questions, GPUPI 3.0 is ok for me and we stay with extreme at superposition like agreed on the thread, too late to change this I think. The result tab shows min and max fps at least

There is no information if the site will return and when

The aquamark file is the problem, it has 5,01MB - the screenshot of 3d2000 you sent is easily submittable if you want to use the result

I checked and tried to upload it and got same result like you, 5MB is huge file above the limit. This happens sometimes, mostly if you bench and screen at high resolution or something goes wrong at normal settings

You can use both backgrounds, I found the new version with Galax sponsorship and improvized.

George Storm I heard

10KB is much too small for a valid aquamark file, but 2MB is too big for rig picture or discrete screenshot. Try to downsize this a bit. P.S. you can send the file to michael@hwbot.org so I can check it

I do not remember rtls, but I used a normal test pattern for subs like at this screen

We cannot fix a problem you cause - either your screenshot or your rig picture are too big, on verification files this can also be the integrated screenshot (res too high or file to big bc of unstable settings)

Seems your switch worked

Merry Christmas to all of you

Invallid bc cpuz is missing - I am not sure what to say, this doesnt look good^^ - please use latest version or edit by hand if you use your 8350k again... http://hw-museum.cz/data/hwbot/HWBOT_X265_2.1_cpu-z_1.81.zip

Latest version again with cpuz 1,81 for better hardware recognition (8350k for example) http://hw-museum.cz/data/hwbot/HWBOT_X265_2.1_cpu-z_1.81.zip

Since when do you care for oc and hwbot again? Not sure you followed the latest development but are currently at transition with new general manager, new servers and to rev 7 which is due in january after last information. Let´s hope this will fix some issues

Last stage went to USA, grats, but the overall win clearly goes to australia, congratulations for the country cup win and I hope all participants had some fun

Me neither, so who cares^^