Limecoconut Posted August 29, 2014 Posted August 29, 2014 ok whats the trick with these board to oc a chip iv tryed differnet settings for my g3258 and i cant get it oc past 3200mhzs? Quote
nickolp1974 Posted January 16, 2015 Posted January 16, 2015 Whats considered to be the best bios for this board, will be used sub zero, currently have F6 installed Quote
Crew Strunkenbold Posted January 16, 2015 Crew Posted January 16, 2015 X04 They even didnt solve tcWL bug with 7e or X08. Quote
Crew Strunkenbold Posted January 16, 2015 Crew Posted January 16, 2015 You cant set tcWL=6 with other bios then X04. You have to stick to 7 otherwise board hangs at C0. Quote
nickolp1974 Posted January 19, 2015 Posted January 19, 2015 Been having a few problems and wondering if anyone can provide help?? Tried X04 bios and had a bit of a play, nothing major and switched on today and constant bsod, returned to default/clr cmos and stlll bsod, only way to get to windows was to select "load defaults and boot" Flashed back to F6 and still had bsods managed to get it working and re installed win7 and 8(2xSSD) all seemed to go well but there back, bsod code f4 which i beleive points to a drive but they both cant be bad and i also get memory management, tried sticks at xmp and defaults (ram is corsair dom plats 2800, also does it with my ripjaws) Something is not right somewhere and i'm almost certain its the board (hardware) at fault, have also tried both bios's Quote
dinos22 Posted February 5, 2015 Posted February 5, 2015 install test OS on a single drive, run superpi and prime95 and see if it still does it. Quote
nickolp1974 Posted February 5, 2015 Posted February 5, 2015 Thanks for the reply dinos, most of the above problems seem to be ok now, the issue is now pointing at the Lan driver, giving random bsods but mainly when pc is idle or downloading, have found a driver with none of the bloatware and that does it too. Not had much time lately to test thoroughly but hopefully get to the bottom of things Quote
TASOS Posted October 12, 2015 Author Posted October 12, 2015 A couple of questions here, about the latest official bios (F8). Wanted to check out a Broadwell cpu (i5-5675C). So i flashed F8 over my X08 on bios 1 chip. I honestly dont recall any other , flashing procedure taking place at that moment. But , my bios 2 chip , with X04 version "vanished" Became F8 version also. Is that something that suppose to happen or something went wrong here ? Does F8 Version flashes the backup bios chip at the same time ? Now , i cant revert back to the X series bioses. Tried Qflash , Efiflash , @bios ... nothing. Is there any kind of extra command line (/switches) to be used ? // Now regarding the F8 bios performance on Broadwell cpu's. Any special treatment-settings needed ? I had really bad , XTU scores with it. Really Bad. Quote
xxbassplayerxx Posted October 12, 2015 Posted October 12, 2015 I believe it has to do with the single/dual BIOS switches. There's definitely a way to flash it back but I think it has to be done via DOS or something like that... @sofos1990 @dinos22 Quote
Administrators websmile Posted October 12, 2015 Administrators Posted October 12, 2015 http://forum.hwbot.org/showthread.php?t=107213&page=18 Take a look here, Ihad similar problem and this was only way to solve it Quote
TASOS Posted October 12, 2015 Author Posted October 12, 2015 I believe it has to do with the single/dual BIOS switches. There's definitely a way to flash it back but I think it has to be done via DOS or something like that... @sofos1990 @dinos22 The efiflash is dos based , but no luck with it. I tried it. Perhaps it needs some kind of commands to bypass safety protection. It needs to force flash. http://forum.hwbot.org/showthread.php?t=107213&page=18Take a look here, Ihad similar problem and this was only way to solve it Thanks i'll give it a try. The procedure is though dos-usb or within windows ? Cause i extracted 2 files , one named 32bit and the other 64bit. Quote
Administrators websmile Posted October 12, 2015 Administrators Posted October 12, 2015 (edited) Iirc, I had to do the job in windows - there are small notes with instructions in the package you unzip Edited October 12, 2015 by websmile Quote
TASOS Posted October 12, 2015 Author Posted October 12, 2015 Iirc, I had to do the job in windows - there are small notes with instructions in the package you unzip Yeap Windows based utility. Everything worked like a charm :woot: I'm back to X04 :celebration: Quote
stasio Posted October 13, 2015 Posted October 13, 2015 You can also flash BIOS for LN2 board...... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.