Taloken Posted September 26, 2015 Share Posted September 26, 2015 (edited) Thanks Havli, i will give it a try ! Edit : After replacing with 1.72, and even another 1.73 cpu-z, it's working. I don't remember the cpu-z admin rights popup the first time, so i suppose that was the load which crashed my system. Great bench you did here ! Edited September 26, 2015 by Taloken Quote Link to comment Share on other sites More sharing options...
Aleslammer Posted December 22, 2015 Share Posted December 22, 2015 Have ran a few 939 only glitch 3200 Manchester came up as a NewCastle when I uploaded the file, correct in the window in OS. Nice bench!!! Quote Link to comment Share on other sites More sharing options...
electron libre Posted August 18, 2016 Share Posted August 18, 2016 (edited) I am on windows 10 64 an idea of the problem ??? yet enabled in the bios !! "HPET timer not active, it is required for windows 8 and later. HPET can be enabled by following command: bcdedit /set useplatformclock yes. Edited August 18, 2016 by electron_libre Quote Link to comment Share on other sites More sharing options...
Oj0 Posted August 18, 2016 Share Posted August 18, 2016 I am on windows 10 64 an idea of the problem ??? yet enabled in the bios !! "HPET timer not active, it is required for windows 8 and later. HPET can be enabled by following command: bcdedit /set useplatformclock yes. Same as GPUPI. Open Command Prompt as admin and type "bcdedit /set useplatformclock yes" and hit Enter. Restart your computer and you're set. Quote Link to comment Share on other sites More sharing options...
electron libre Posted August 19, 2016 Share Posted August 19, 2016 THANKS MAN !!!!!! Quote Link to comment Share on other sites More sharing options...
gupsterg Posted May 12, 2017 Share Posted May 12, 2017 (edited) When I use submit button and enter HWBot username/pwd I get this, then once click OK I get this. So the way I did the sub is just by uploading data file and screenie using PRTSCRN. Now is this breaking rule:- The screenshot must be obtained using the integrated screenshot functionality Cheers. *** edit *** I see data file has the screenie , so guess I'm all good? Edited May 12, 2017 by gupsterg Quote Link to comment Share on other sites More sharing options...
Administrators websmile Posted May 12, 2017 Administrators Share Posted May 12, 2017 Yes, the screenshot is integrated in the datafile - all OK Quote Link to comment Share on other sites More sharing options...
rakesh_sharma23 Posted June 13, 2017 Share Posted June 13, 2017 Tried downloading 5 -6 times from different PC the HWBOT_X265_2.0.rar file. it downloads successfully but when i unzip it gives following error.. any solution. Quote Link to comment Share on other sites More sharing options...
Pingo Posted June 13, 2017 Share Posted June 13, 2017 Tried downloading 5 -6 times from different PC the HWBOT_X265_2.0.rar file. it downloads successfully but when i unzip it gives following error.. any solution. In your screenshot there is a whitespace in the userpath, sometimes Winrar can be a bit fussy about that. Have you tried to copy the rar file to a directory without spaces in its name like "C:\Benchmarks"? Quote Link to comment Share on other sites More sharing options...
rakesh_sharma23 Posted June 13, 2017 Share Posted June 13, 2017 Same message when copied new download on root of D drive and windows user have full permission on root of the drive so no file permission error. Also downloaded via two different sources same issue. https://hwbotdownloads.s3.amazonaws.com/downloads/benchmarks/HWBOT_X265_2.0.rar http://hw-museum.cz/data/hwbot/HWBOT_X265_2.0.rar Quote Link to comment Share on other sites More sharing options...
rakesh_sharma23 Posted June 13, 2017 Share Posted June 13, 2017 To eliminate all software issues i formated my HDD install WIN10 with all updates, AV will all updates and again downloaded from hwbot site. this time AV gives a warning please check .. Quote Link to comment Share on other sites More sharing options...
havli Posted June 13, 2017 Author Share Posted June 13, 2017 It seems you are having two problems: 1. The x265 Benchmark package is compressed using rar5 format, which is not compatible with older versions of Winrar. 2. With 99.999% chance a false positive detection by your AV software. I'm afraid there is no solution to this other than either add an exception to your AV to ignore "HWBOTx265Benchmark.exe" (if possible) or use a different AV software. Quote Link to comment Share on other sites More sharing options...
rakesh_sharma23 Posted June 14, 2017 Share Posted June 14, 2017 The problem was with the WinRAR setup .. so download the latest one and all solved. Unrar successfully with WinRAR Version 5.1 or above. Thanks all for great feedback. It seems you are having two problems: 1. The x265 Benchmark package is compressed using rar5 format, which is not compatible with older versions of Winrar. 2. With 99.999% chance a false positive detection by your AV software. I'm afraid there is no solution to this other than either add an exception to your AV to ignore "HWBOTx265Benchmark.exe" (if possible) or use a different AV software. Quote Link to comment Share on other sites More sharing options...
Taloken Posted June 14, 2017 Share Posted June 14, 2017 Is it possible to have it packaged as a ZIP archive please ? A much more convenient and universal format Quote Link to comment Share on other sites More sharing options...
diola Posted July 12, 2017 Share Posted July 12, 2017 Hi, i detect some bug whem use this command with one Core i9-7900X: bcdedit /set useplatformclock yes After applying this command, several games applications have performance declines. Simply disable using the command(or simple dont use the firts command, but HWBOt X265 Bench dont wotk to): bcdedit /set useplatformclock no That the results normalize. Quote Link to comment Share on other sites More sharing options...
wiLLius Posted July 27, 2017 Share Posted July 27, 2017 I've got this weird problem on a stripped W7 image of mine. Latest version of the bench program. Bench runs fine, puts out a score etc. But the save file button doesn't do anything. and since removed all LAN capabilities of the image, i cannot upload a score. Tried on W10, stock and it worked just fine there. So its either something with W7, or something with my image. Quote Link to comment Share on other sites More sharing options...
diola Posted July 28, 2017 Share Posted July 28, 2017 Hi, i detect some bug whem use this command with one Core i9-7900X: bcdedit /set useplatformclock yes After applying this command, several games applications have performance declines. Simply disable using the command(or simple dont use the firts command, but HWBOt X265 Bench dont wotk to): bcdedit /set useplatformclock no That the results normalize. Correcting... It does not just happen with the Core i9-7900X, it happens with all CPU. [] Quote Link to comment Share on other sites More sharing options...
havli Posted July 28, 2017 Author Share Posted July 28, 2017 Most likely something is missing in your special win7 install. I never had this problem in windows 7 and neither anywhere else. But I never use modded OS, so it must be the reason. Quote Link to comment Share on other sites More sharing options...
Mr.Scott Posted November 19, 2017 Share Posted November 19, 2017 Havli, X265 does not detect unlocked cores? I mean, it detects and runs the cores correctly in the bench and GUI, but they're not included in the data file. Example: CPU 960T unlocked to 5 or 6 cores shows and runs correctly in the GUI and bench, but the data file still designates it as 4 cores active and you cannot edit the sub's core count. Also, cannot edit core count after submission. Quote Link to comment Share on other sites More sharing options...
havli Posted November 19, 2017 Author Share Posted November 19, 2017 Cores count is shown in the GUI but the data file doesn't contain this information. Only CPU name and socket count are stored there. Core count is determined by HWBOT based on the CPU model (either by autodetection or by manual typing what CPU you have). The truth is editing of existing submission to fill in correct CPU parameters is kinda broken. For example I've just submitted this as a test. http://hwbot.org/submission/3713436_ (I'll delete it tomorrow) The CPU model wasn't detected, so at first I selected X4 960T unlocked to 5 cores... worked. Then I edited to unlocked 6 cores, also worked. Then switched to X2 550 unlocked to 4 cores... also worked. But now when I want to edit to 3 active cores the edit fails with a white screen. I'm not sure how HWBOT API detection works on real unlocked parts - they are usually detected by diferent name than original. If it is not detected properly and you have to type the name yourself, then it should be also possible to select actual unlocked status. If it is detected correctly (like X4 960T) and editing after submission has been uploaded doesn't work, there is one workaround. Instead of saving the datafile and manual uploading later, you can upload directly from X265 and there is an option to disable CPU detection. In that case it should be possible to choose correct CPU and core count. I guess it would be also handy to have this option with data-file saving. I can add it in future version, shouldn't be a problem. Or working edit function on hwbot could solve this. Quote Link to comment Share on other sites More sharing options...
Mr.Scott Posted November 19, 2017 Share Posted November 19, 2017 I get it. Thanks. I'll try the work around. Quote Link to comment Share on other sites More sharing options...
terrabyte Posted November 21, 2017 Share Posted November 21, 2017 Hi Everyone, I know this is a long shot but I was wondering if anyone has experience or ideas about running this benchmark properly on an older magny-cours opteron setup. Running 4x 12 core 6170 CPUs, 48 cores in total. For starters the benchmark only seems to show 36 cores and 3 CPUs in the GUI, but I thought that might just be an anomaly. Running the benchmark itself though is pretty damn slow. Using the built in monitoring it shows around 80% CPU usage, but windows server 2008 Perf mon shows around 30% (which I'm more inclined to believe judging by the speed). I've tried every variation of overkill (2-12x) but I can't seem to get it to utilize even half of my CPU power. I was wondering if maybe it's because they don't support some of the newer instruction sets? Any help is appreciated! Thanks guys Quote Link to comment Share on other sites More sharing options...
havli Posted November 21, 2017 Author Share Posted November 21, 2017 Hi, that is a very nice system you have. Unfortunately to get somewhat good score in x265, you need at least SSE4.1 compatible CPU. K10 doesn't even support SSSE3 and because of that the fps is very low. Using overkill will help to some extent... but not much. 15h Opterons are much faster on the G34 platform. I'm aware of the wrong cores count in GUI on this kind of systems... but why it doesn't work properly I'm not sure. Anyway it is for display only, has no effect on score or anything else. Quote Link to comment Share on other sites More sharing options...
terrabyte Posted November 21, 2017 Share Posted November 21, 2017 Thank you for getting back to me. That's a shame, but they are pretty old tech so I should have expected that! I do have some bulldozer architecure opterons around somewhere (62xx) so will try them out as they have sse4.1 I believe. Quote Link to comment Share on other sites More sharing options...
Administrators websmile Posted December 23, 2017 Administrators Share Posted December 23, 2017 Latest version again with cpuz 1,81 for better hardware recognition (8350k for example) http://hw-museum.cz/data/hwbot/HWBOT_X265_2.1_cpu-z_1.81.zip Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.