DJ.Ander Posted April 4, 2022 Posted April 4, 2022 Hello ! Version 2701 has appeared, who can add PortBios? Quote
dmytri2009 Posted April 4, 2022 Posted April 4, 2022 4 hours ago, DJ.Ander said: Hello ! Version 2701 has appeared, who can add PortBios? It's out of any useful improvements. 1 Quote
DJ.Ander Posted April 4, 2022 Posted April 4, 2022 11 hours ago, dmytri2009 said: It's out of any useful improvements. Well, I would still like the latest version)) Quote
dmytri2009 Posted April 5, 2022 Posted April 5, 2022 5 hours ago, DJ.Ander said: Well, I would still like the latest version)) Go do it by yourself Quote
mig0 Posted May 27, 2022 Posted May 27, 2022 Hi everyone, I'm new here, I've just read through this topic from the beginning and have some question. Can anybody help me? First, I have an M9A mainboard with default BIOS version 0701, and as I read, I can flash the modded BIOS to make it work with QTJ2 without any hardware mod, right? I also read that I can use the unlock modded BIOS 2301 so I dont have to mess with the hardware (I'm not good at this), so if I use the 2301 unlock to flash, I need to rename it to M9A.cap and use the BIOS Flashback right? I cant find the description of the modded BIOS, so I want to ask if 2301 modded unlock BIOS can support the QTJ2? Thank you for your time. Quote
dmytri2009 Posted May 27, 2022 Posted May 27, 2022 8 hours ago, mig0 said: Hi everyone, I'm new here, I've just read through this topic from the beginning and have some question. Can anybody help me? First, I have an M9A mainboard with default BIOS version 0701, and as I read, I can flash the modded BIOS to make it work with QTJ2 without any hardware mod, right? I also read that I can use the unlock modded BIOS 2301 so I dont have to mess with the hardware (I'm not good at this), so if I use the 2301 unlock to flash, I need to rename it to M9A.cap and use the BIOS Flashback right? I cant find the description of the modded BIOS, so I want to ask if 2301 modded unlock BIOS can support the QTJ2? Thank you for your time. As I know you cannot flash modded bios over stock one with asus flashback feature. You need to use bios hardware programmer to reflash it. I recommend to flash v. 2603, it supports all modded laptop cpu's. Quote
Sparks.nl Posted October 20, 2022 Posted October 20, 2022 Hi all, I was just wondering what the hw mod (the wire) does? 1 Quote
Markankg Posted January 31, 2023 Posted January 31, 2023 (edited) Привет, ребята. Подскажите пожалуйста, есть ли на плате максимус 10 апекс такие же пины, как и на 9 апексе, для разблокировки прошиваемых файлов биоса. Мне нужно прошить пластину через флэш-память, чтобы на ней запустился ноутбучный процессор (9980hk srfd0) Edited January 31, 2023 by Markankg 1 Quote
dmytri2009 Posted January 31, 2023 Posted January 31, 2023 (edited) 8 hours ago, Markankg said: Привет, ребята. Подскажите пожалуйста, есть ли на плате максимус 10 апекс такие же пины, как и на 9 апексе, для разблокировки прошиваемых файлов биоса. Мне нужно прошить пластину через флэш-память, чтобы на ней запустился ноутбучный процессор (9980hk srfd0) На фото не микросхема биоса. Две флешки обвел на фото. Шьются программатором через SPI-разъем под ними. Доски 9го и 10го поколения идентичны. Edited January 31, 2023 by dmytri2009 1 Quote
Markankg Posted February 1, 2023 Posted February 1, 2023 11 hours ago, dmytri2009 said: Доски 9го и 10го поколения идентичны. Посмотри самое первоее сообщ в теме в начале. Там замыкали два контакта для того что бы открыть запись регионов итд. на 10 апексе же там по другому все Quote
dmytri2009 Posted February 5, 2023 Posted February 5, 2023 On 2/1/2023 at 11:11 AM, Markankg said: Посмотри самое первоее сообщ в теме в начале. Там замыкали два контакта для того что бы открыть запись регионов итд. на 10 апексе же там по другому все Почитай внимательно тему. Зачем уродовать доску, если достаточно прошить модифицированный биос. И я бы рекомендовал писать на английском, больше шансов, что тебе помогут. Quote
Victor91 Posted March 29, 2023 Posted March 29, 2023 (edited) Hi everyone, I'd like to ask a question, I'm modified my Maximus IX Extreme motherboard to work with Coffelake cpus ( pinmod and the unlock for bios flash then dump and modified my bios successfully) Do i have to isolate the pads on the cpus I like to use? Edited March 29, 2023 by Victor91 Quote
dmytri2009 Posted March 29, 2023 Posted March 29, 2023 7 hours ago, Victor91 said: Hi everyone, I'd like to ask a question, I'm modified my Maximus IX Extreme motherboard to work with Coffelake cpus ( pinmod and the unlock for bios flash then dump and modified my bios successfully) Do i have to isolate the pads on the cpus I like to use? See the first post! NOTE! Do the bios flash after hardware mods are done !!! Soldering cpu pads is not needed . Known issue is that HT does not work currently on 6c cpu's hence it is disabled by default. After everything is set-up board will work with cofee lake based cpu's as well as with older cpu's without issue. Have fun ! 1 Quote
LTHavoc Posted July 16, 2023 Posted July 16, 2023 Okey, so I've been reading this thread front to back a couple of times and decided to give it a shot myself. I can't seem to get past flashing the dsanke 2603 bios, using a 4gb gen.2 usb with bios renamed to creative.rom... When flashing using flashback and shorting the pins to unlock for modded bios, the bios light flashes 3-4 times as normal then stays on forever. It just doesn't want to flash the the bios it seems, could someone help me out? Maximus IX Apex + 7700K (9900KS when I can manage to flash the bios) Quote
davidm71_2 Posted February 10 Posted February 10 I'm on I think an older Dsanke mod for my Apex IX. To upgrade to the resizebar supported bios can I use fptw64 (flash programming tool) to flash it? All my FD descrptors are unlocked. Thanks Quote
davidm71_2 Posted February 12 Posted February 12 Hi, Was wondering what cpu's do not require soldering or pin pad mods to work with this bios? On ver 2603. Don't want to risk damaging the board or cpu. Thanks. Quote
Seby Posted February 12 Posted February 12 (edited) 33 minutes ago, davidm71_2 said: Hi, Was wondering what cpu's do not require soldering or pin pad mods to work with this bios? On ver 2603. Don't want to risk damaging the board or cpu. Thanks. Just kaby lake based CPUs, so the dual and quad core chips. Edited February 12 by Seby Quote
davidm71_2 Posted February 12 Posted February 12 So an 8700K wouldn't work without modifications to the pin pads? What about a i3 9350K. Was told those require no modifications. Thanks Quote
davidm71_2 Posted February 12 Posted February 12 On 3/29/2023 at 3:40 PM, dmytri2009 said: See the first post! NOTE! Do the bios flash after hardware mods are done !!! Soldering cpu pads is not needed . Known issue is that HT does not work currently on 6c cpu's hence it is disabled by default. After everything is set-up board will work with cofee lake based cpu's as well as with older cpu's without issue. Have fun ! Can someone repost photos on first post describing and showing the solder job on the nuvatron gnd resistors. Its no longer there. Thanks. Quote
Seby Posted February 12 Posted February 12 Yes 9350K would work and 8700K wouldn't. As for the mod: And in more detail: Quote
davidm71_2 Posted February 12 Posted February 12 24 minutes ago, Seby said: Yes 9350K would work and 8700K wouldn't. As for the mod: And in more detail: Did a lot of reading regarding those solder mods you have to make and if I understand you need two pairs of pinsconnected either with direct solder and another with wire. Its something maybe one day I'll try but I already have Dsanke's latest 2603 bios version installed. Desire to be able to run Windows 11 without roadblocks from microsoft. Thats why if the 9350K doesn't need mods I'll go with it but fact it only has 4 threads makes me take a moment to think about it... Thanks Quote
Seby Posted February 12 Posted February 12 50 minutes ago, davidm71_2 said: Did a lot of reading regarding those solder mods you have to make and if I understand you need two pairs of pinsconnected either with direct solder and another with wire. Its something maybe one day I'll try but I already have Dsanke's latest 2603 bios version installed. Desire to be able to run Windows 11 without roadblocks from microsoft. Thats why if the 9350K doesn't need mods I'll go with it but fact it only has 4 threads makes me take a moment to think about it... Thanks Only need the one mod I showed with the boardview, the other is for flashing the bios, which you already did. Pretty easy thing to solder, and you can use so much better CPUs. Quote
davidm71_2 Posted February 13 Posted February 13 4 hours ago, Seby said: Only need the one mod I showed with the boardview, the other is for flashing the bios, which you already did. Pretty easy thing to solder, and you can use so much better CPUs. That diagram is a little confusing. Quote
Seby Posted February 13 Posted February 13 (edited) Solder a wire between the red circle and any yellow (ground) point. Easiest one is probably the biggest component: OU1C129 , which is the same place that the image in the post I linked used. Though could also do the shorted possible run by going right across to OR661. Edited February 13 by Seby Quote
davidm71_2 Posted February 13 Posted February 13 2 minutes ago, Seby said: Solder a wire between the red circle and any yellow (ground) point. Easiest one is probably the biggest component: OU1C129 , which is the same place that the image in the post I linked used. Though could also do the shorted possible run by going right across to OR661. Like this: Saw this on a techpowerup thread: https://www.techpowerup.com/forums/threads/adventure-running-8-9th-gen-coffee-lake-cpus-on-z170-motherboard-asus-maximus-viii-ranger.284375/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.