Jump to content
HWBOT Community Forums

Recommended Posts

Posted

Isn't the C6H T-top? And since the IMC can't sensibly run more frequency (limited by fclk ratio) moving to 4 dimms or Dual Rank dimms could be a possibility for a little bit more performance maybe? 

Posted

Thanks everyone.

It’s a really tricky one on this platform, as scaling just falls away very quickly. If it scaled correctly like my spreadsheets it should have been much faster, but after 5-5.2g it really takes a hit. This run was with 1.5s greater efficiency at 4ghz, but only 0.2s faster at full out.

 

I tried 4 dimms, but unfortunately The board either doesn’t like mixed PCB types, or I have a bad slot which is most likely the issue. I never had had much success with 4Dimms on this board, and the 1st and 3rd are difficult to get to boot even with 2 dimms. I don’t have any 16gb dimms so cannot test it. 

 

 

Posted
On 8/25/2019 at 4:03 PM, KaRtA said:

I tried 4 dimms, but unfortunately The board either doesn’t like mixed PCB types, or I have a bad slot which is most likely the issue. I never had had much success with 4Dimms on this board, and the 1st and 3rd are difficult to get to boot even with 2 dimms. I don’t have any 16gb dimms so cannot test it. 

I hear ryzen has a much easier time with 4 sticks of micron rev e than 4 stick of bdie, so if you ran 4 sticks of bdie you may have a bad time.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...