Jump to content
HWBOT Community Forums

Recommended Posts

  • Crew
Posted (edited)
I saw one L313B996 do 5.8..I hope my reach 6.0 GHZ..I will be lucky..

 

MAD22 has a L313B999 that do 5ghz 1.22v, probly 6.5 cpu. so you can have luck!

Edited by Vivi
Guest Rbby258
Posted

everybody else gets a reply, nice one.

 

L311B492

  • Crew
Posted (edited)
everybody else gets a reply, nice one.

 

L311B492

 

aah never saw sorry dude,

 

 

that batch should be a scaling batch! If you get one 5ghz at 1.4v = 6.3 32m, or 1.35v possible 6.4, and then lower just gets more golden!

 

i had L311B512 and my best one was 1.39v 5ghz for 6350 32M, i wish i had a sub 1.3v cpu, batch is strong

 

Gogogo

Edited by Vivi
Guest Rbby258
Posted
aah never saw sorry dude,

 

 

that batch should be a scaling batch! If you get one 5ghz at 1.4v = 6.3 32m, or 1.35v possible 6.4, and then lower just gets more golden!

 

i had L311B512 and my best one was 1.39v 5ghz for 6350 32M, i wish i had a sub 1.3v cpu, batch is strong

 

Gogogo

 

 

should arrive tomorrow, and go under dice this week then ln2 in a few weeks when i get my dewar

Posted
siiiigh thats terrible

 

The shop let's me get a new one and turn the other one in without costs, except for sending the old one ofcourse. At least I got to test one for free :P

 

@Rbby, I'm very curious!

Guest Rbby258
Posted
The shop let's me get a new one and turn the other one in without costs, except for sending the old one ofcourse. At least I got to test one for free :P

 

@Rbby, I'm very curious!

 

should be good right

Posted

Vivi, can you tell anything about low voltage cpu's <1.2v for 5GHz, regarding to the CB? Say if you have a <1.2v 5GHz cpu, will it go faster if it might have a higher CB, let's say -110, than a 1.3v 5GHz chip that has a -130 CB?

Guest Rbby258
Posted

im new to haswell whats all the voltages i should set

  • Crew
Posted
Vivi, can you tell anything about low voltage cpu's <1.2v for 5GHz, regarding to the CB? Say if you have a <1.2v 5GHz cpu, will it go faster if it might have a higher CB, let's say -110, than a 1.3v 5GHz chip that has a -130 CB?

 

hey man!

 

well, i had one cpu that did 1.25v 5ghz, but because of -100CB it could only reach 6.2ghz,

 

now with my 1.17v cpu i have -120 CB, and can reach 6.5, but you are right, if you have the right combo it will work out fine, like if you have 1.35v cpu, with -135cb, you will also reach 6.5, like one of Xtreme addicts cpus, can reach 6.9cpu-z but with -140+ cb and 1.35v 5g

 

CB also makes OC'ing wall soon, like my 1.17v chip, it also only goes to 6.5, but it can do it at 1.6v more voltage does not help because cpu is too warm. some cpus can also reach 6.5, but at higher V, but also not more because of warm temp. so in my opinion, any cpu below 1.3v and scaling batch will reach 6.5, lower V doesn't mean higher clock, just same clock at lower volts. (give or take ofcourse, you could just have a great chip that goes to the moon)

 

@Rbby258, good place to start is use multiplier and leave blck at 100, then up vcore and input/vccin/vrin to like this ratio,

 

for 1.2vcore 1.9vrin

1.3vcore 2vrin

1.4vcore 2.1vrin

 

 

@dumo, bro we need memory that can go to 2000 lol!

Guest Rbby258
Posted

1.3vcore 2vrin 50 x 100 no post :( only using nh-d14?

  • Crew
Posted
Friend of mine just ran into this batch, L310B491. Wondering if it's a great one like you had vivi :)

Also has a L312B509, nothing about this one yet.

 

i hope so too man! i had 2, and both did 6.5. XA had about 20, and had about 4 good ones, so the odds are okay. But can easily be a 1.45v turd. L312B509, if i saw it i would buy it, because L312B515 and L312B7xx have spawned huge cpus

 

unlucky to hear Rbby258, remember even a good batch you need to test atleast 5 to find a nice one, i had L311B512 and L310B488 which are both scaling batches but never tried enough to find a sub 1.3v cpu, it takes many.. you need luck.

Guest Rbby258
Posted
i hope so too man! i had 2, and both did 6.5. XA had about 20, and had about 4 good ones, so the odds are okay. But can easily be a 1.45v turd. L312B509, if i saw it i would buy it, because L312B515 and L312B7xx have spawned huge cpus

 

unlucky to hear Rbby258, remember even a good batch you need to test atleast 5 to find a nice one, i had L311B512 and L310B488 which are both scaling batches but never tried enough to find a sub 1.3v cpu, it takes many.. you need luck.

 

test it on dice tomorrow

Guest Rbby258
Posted

think it would be worth it for me to switch to a 3770k

Posted (edited)

Just tested my friend's cpu's. The L310B491 was not worth it, but the other one did 4.9GHz at 1.35v. It would run up to 5.4GHz at 1.4v superpi 1m with ss cooling. No screenshot of that. 5500 is definitly possible with more voltage, but I didn't have the right os to test any further at that point and only limited time.

 

OnO20spl.png

Edited by rsnubje

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...